From: Fabio Estevam <festevam@gmail.com>
To: daniel.lezcano@linaro.org
Cc: linux-pm@vger.kernel.org, krzysztof.kozlowski+dt@linaro.org,
robh+dt@kernel.org, conor+dt@kernel.org,
devicetree@vger.kernel.org, Fabio Estevam <festevam@denx.de>
Subject: [PATCH 2/2] thermal: imx8mm: Allow reboot after critical temperature
Date: Wed, 23 Aug 2023 14:33:34 -0300 [thread overview]
Message-ID: <20230823173334.304201-2-festevam@gmail.com> (raw)
In-Reply-To: <20230823173334.304201-1-festevam@gmail.com>
From: Fabio Estevam <festevam@denx.de>
Currently, after the board reaches the critical temperature, the system
goes through a poweroff mechanism.
In some cases, such behavior does not suit well, as the board may be
unattended in the field and rebooting may be a better approach.
The bootloader may also check the temperature and only allow the boot to
proceed when the temperature is below a certain threshold.
Introduce the 'nxp,reboot-on-critical' property to indicate that the
board will go through a reboot after the critical temperature is reached.
When this property is absent, the default behavior of forcing a shutdown
is kept.
Tested on a imx8mm-evk board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
---
drivers/thermal/imx8mm_thermal.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index e89b11b3f2b9..cc95a1416976 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/thermal.h>
+#include <linux/reboot.h>
#include "thermal_hwmon.h"
@@ -91,6 +92,7 @@ struct imx8mm_tmu {
void __iomem *base;
struct clk *clk;
const struct thermal_soc_data *socdata;
+ bool reboot;
struct tmu_sensor sensors[];
};
@@ -146,8 +148,23 @@ static int tmu_get_temp(struct thermal_zone_device *tz, int *temp)
return tmu->socdata->get_temp(sensor, temp);
}
+static void tmu_critical(struct thermal_zone_device *tz)
+{
+ struct tmu_sensor *sensor = thermal_zone_device_priv(tz);
+ struct imx8mm_tmu *tmu = sensor->priv;
+
+ if (tmu->reboot) {
+ dev_emerg(thermal_zone_device(tz), "%s: critical temperature reached\n",
+ thermal_zone_device_type(tz));
+ kernel_restart(NULL);
+ } else {
+ thermal_zone_device_critical(tz);
+ }
+}
+
static const struct thermal_zone_device_ops tmu_tz_ops = {
.get_temp = tmu_get_temp,
+ .critical = tmu_critical,
};
static void imx8mm_tmu_enable(struct imx8mm_tmu *tmu, bool enable)
@@ -313,6 +330,8 @@ static int imx8mm_tmu_probe(struct platform_device *pdev)
if (IS_ERR(tmu->base))
return PTR_ERR(tmu->base);
+ tmu->reboot = of_property_present(pdev->dev.of_node, "nxp,reboot-on-critical");
+
tmu->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(tmu->clk))
return dev_err_probe(&pdev->dev, PTR_ERR(tmu->clk),
--
2.34.1
next prev parent reply other threads:[~2023-08-23 17:33 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-23 17:33 [PATCH 1/2] dt-bindings: imx8mm-thermal: Document 'nxp,reboot-on-critical' Fabio Estevam
2023-08-23 17:33 ` Fabio Estevam [this message]
2023-08-24 7:18 ` Krzysztof Kozlowski
2023-08-24 9:57 ` Fabio Estevam
2023-08-24 10:34 ` Daniel Lezcano
2023-08-24 10:53 ` Fabio Estevam
2023-08-24 12:38 ` Krzysztof Kozlowski
2023-08-24 14:35 ` Fabio Estevam
2023-08-24 14:54 ` Daniel Lezcano
2023-08-24 15:43 ` Krzysztof Kozlowski
2023-08-24 16:46 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230823173334.304201-2-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@denx.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-pm@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).