[PATCH v3 08/16] arm64: dts: qcom: ipq8074: switch USB QMP PHY to new style of bindings

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 76 +++++++++++----------------
 1 file changed, 32 insertions(+), 44 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 3350804a2f62..e113f5eec8e6 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -125,32 +125,26 @@ soc: soc@0 {
 
 		ssphy_1: phy@58000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00058000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00058000 0x1000>;
 
 			clocks = <&gcc GCC_USB1_AUX_CLK>,
-				<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB1_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_1_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB1_PHY_BCR>,
-				<&gcc GCC_USB3PHY_1_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@58200 {
-				reg = <0x00058200 0x130>,     /* Tx */
-				      <0x00058400 0x200>,     /* Rx */
-				      <0x00058800 0x1f8>,     /* PCS */
-				      <0x00058600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB1_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_1_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_1: phy@59000 {
@@ -168,32 +162,26 @@ qusb_phy_1: phy@59000 {
 
 		ssphy_0: phy@78000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00078000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00078000 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_0_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
-				<&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x00078200 0x130>,     /* Tx */
-				      <0x00078400 0x200>,     /* Rx */
-				      <0x00078800 0x1f8>,     /* PCS */
-				      <0x00078600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_0_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: phy@79000 {
@@ -628,7 +616,7 @@ dwc_0: usb@8a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
@@ -670,7 +658,7 @@ dwc_1: usb@8c00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phys = <&qusb_phy_1>, <&ssphy_1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
-- 
2.39.2