From: Macpaul Lin <macpaul.lin@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Fabien Parent <fparent@baylibre.com>,
Macpaul Lin <macpaul.lin@mediatek.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>
Cc: Bear Wang <bear.wang@mediatek.com>,
Pablo Sun <pablo.sun@mediatek.com>,
Macpaul Lin <macpaul@gmail.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>
Subject: [PATCH 4/4] arm64: dts: mediatek: mt8195-demo: simplify mt6360 nodes
Date: Fri, 25 Aug 2023 19:46:23 +0800 [thread overview]
Message-ID: <20230825114623.16884-4-macpaul.lin@mediatek.com> (raw)
In-Reply-To: <20230825114623.16884-1-macpaul.lin@mediatek.com>
The dts file for the MediaTek MT8195 demo board has been refactored
to improve the configuration of the MT6360 multi-function PMIC.
The changes include:
- Addition of the mt6360.dtsi include file, which contains the common
configuration of the MT6360 for all mt8195 boards.
- Removal of the direct inclusion of the mt6360-regulator.h file.
- Removal of the detailed configuration of the MT6360 PMIC since
the included mt6360.dtsi is used.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 136 ++++++-------------
1 file changed, 39 insertions(+), 97 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 8aea6f5d72b3..da1c077c3d9e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -11,7 +11,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
-#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
/ {
model = "MediaTek MT8195 demo board";
@@ -130,103 +129,9 @@
mt6360: pmic@34 {
compatible = "mediatek,mt6360";
reg = <0x34>;
- interrupt-controller;
+ pinctrl-0 = <&mt6360_pins>;
+ pinctrl-names = "default";
interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
- interrupt-names = "IRQB";
-
- charger {
- compatible = "mediatek,mt6360-chg";
- richtek,vinovp-microvolt = <14500000>;
-
- otg_vbus_regulator: usb-otg-vbus-regulator {
- regulator-compatible = "usb-otg-vbus";
- regulator-name = "usb-otg-vbus";
- regulator-min-microvolt = <4425000>;
- regulator-max-microvolt = <5825000>;
- };
- };
-
- regulator {
- compatible = "mediatek,mt6360-regulator";
- LDO_VIN3-supply = <&mt6360_buck2>;
-
- mt6360_buck1: buck1 {
- regulator-compatible = "BUCK1";
- regulator-name = "mt6360,buck1";
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1300000>;
- regulator-allowed-modes = <MT6360_OPMODE_NORMAL
- MT6360_OPMODE_LP
- MT6360_OPMODE_ULP>;
- regulator-always-on;
- };
-
- mt6360_buck2: buck2 {
- regulator-compatible = "BUCK2";
- regulator-name = "mt6360,buck2";
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1300000>;
- regulator-allowed-modes = <MT6360_OPMODE_NORMAL
- MT6360_OPMODE_LP
- MT6360_OPMODE_ULP>;
- regulator-always-on;
- };
-
- mt6360_ldo1: ldo1 {
- regulator-compatible = "LDO1";
- regulator-name = "mt6360,ldo1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-allowed-modes = <MT6360_OPMODE_NORMAL
- MT6360_OPMODE_LP>;
- };
-
- mt6360_ldo2: ldo2 {
- regulator-compatible = "LDO2";
- regulator-name = "mt6360,ldo2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-allowed-modes = <MT6360_OPMODE_NORMAL
- MT6360_OPMODE_LP>;
- };
-
- mt6360_ldo3: ldo3 {
- regulator-compatible = "LDO3";
- regulator-name = "mt6360,ldo3";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-allowed-modes = <MT6360_OPMODE_NORMAL
- MT6360_OPMODE_LP>;
- };
-
- mt6360_ldo5: ldo5 {
- regulator-compatible = "LDO5";
- regulator-name = "mt6360,ldo5";
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3600000>;
- regulator-allowed-modes = <MT6360_OPMODE_NORMAL
- MT6360_OPMODE_LP>;
- };
-
- mt6360_ldo6: ldo6 {
- regulator-compatible = "LDO6";
- regulator-name = "mt6360,ldo6";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <2100000>;
- regulator-allowed-modes = <MT6360_OPMODE_NORMAL
- MT6360_OPMODE_LP>;
- };
-
- mt6360_ldo7: ldo7 {
- regulator-compatible = "LDO7";
- regulator-name = "mt6360,ldo7";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <2100000>;
- regulator-allowed-modes = <MT6360_OPMODE_NORMAL
- MT6360_OPMODE_LP>;
- regulator-always-on;
- };
- };
};
};
@@ -300,6 +205,34 @@
regulator-always-on;
};
+#include "mt6360.dtsi"
+
+/* For EMI_VDD2 */
+&mt6360_buck1 {
+ regulator-always-on;
+};
+
+/* For EMI_VDDQ */
+&mt6360_buck2 {
+ regulator-always-on;
+};
+
+&mt6360_ldo1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+};
+
+&mt6360_ldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+/* For EMI_VMDDR_EN */
+&mt6360_ldo7 {
+ regulator-always-on;
+};
+
&pio {
eth_default_pins: eth-default-pins {
pins-txd {
@@ -496,6 +429,15 @@
<PINMUX_GPIO103__FUNC_URXD1>;
};
};
+
+ mt6360_pins: mt6360-pins {
+ pins {
+ pinmux = <PINMUX_GPIO100__FUNC_GPIO100>,
+ <PINMUX_GPIO101__FUNC_GPIO101>;
+ input-enable;
+ bias-pull-up;
+ };
+ };
};
--
2.18.0
next prev parent reply other threads:[~2023-08-25 11:47 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-25 11:46 [PATCH 1/4] arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB Macpaul Lin
2023-08-25 11:46 ` [PATCH 2/4] arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions Macpaul Lin
2023-08-25 11:46 ` [PATCH 3/4] arm64: dts: mediatek: mt6360: add PMIC MT6360 related nodes Macpaul Lin
2023-08-28 4:36 ` Chen-Yu Tsai
2023-08-28 9:59 ` Macpaul Lin
2023-08-28 10:51 ` Chen-Yu Tsai
2023-08-30 11:10 ` Macpaul Lin
2023-08-25 11:46 ` Macpaul Lin [this message]
2023-08-30 11:15 ` [PATCH v2 1/4] arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB Macpaul Lin
2023-08-30 11:15 ` [PATCH v2 2/4] arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions Macpaul Lin
2023-08-30 11:15 ` [PATCH v2 3/4] arm64: dts: mediatek: mt6360: add PMIC MT6360 related nodes Macpaul Lin
2023-08-30 11:20 ` Krzysztof Kozlowski
2023-08-31 5:32 ` Macpaul Lin
2023-08-30 11:15 ` [PATCH v2 4/4] arm64: dts: mediatek: mt8195-demo: simplify mt6360 nodes Macpaul Lin
2023-08-30 11:30 ` Krzysztof Kozlowski
2023-08-31 4:06 ` Macpaul Lin
2023-09-05 3:45 ` [PATCH v3 1/2] arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB Macpaul Lin
2023-09-05 3:45 ` [PATCH v3 2/2] arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions Macpaul Lin
2023-09-05 8:01 ` AngeloGioacchino Del Regno
2023-09-05 8:00 ` [PATCH v3 1/2] arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB AngeloGioacchino Del Regno
2023-09-05 8:15 ` Macpaul Lin
2023-09-07 9:15 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230825114623.16884-4-macpaul.lin@mediatek.com \
--to=macpaul.lin@mediatek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bear.wang@mediatek.com \
--cc=chunfeng.yun@mediatek.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fparent@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=macpaul@gmail.com \
--cc=matthias.bgg@gmail.com \
--cc=pablo.sun@mediatek.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).