From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 3/3] arm64: dts: qcom: sm8350-hdk: add pmr735a regulators
Date: Sat, 26 Aug 2023 00:45:50 +0300 [thread overview]
Message-ID: <20230825214550.1650938-3-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230825214550.1650938-1-dmitry.baryshkov@linaro.org>
The SM8350 HDK uses pmr735a to supply some of the voltages (e.g. to
WiFi/BT chip). Declare corresponding regulators together with voltage
boundaries.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 75 +++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 69870f69fe4f..30ff85250505 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -321,6 +321,81 @@ vreg_l10c_1p2: ldo10 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
+
+ regulators-2 {
+ compatible = "qcom,pmr735a-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+
+ vdd-l1-l2-supply = <&vreg_s2e_0p85>;
+ vdd-l3-supply = <&vreg_s1e_1p25>;
+ vdd-l4-supply = <&vreg_s1c_1p86>;
+ vdd-l5-l6-supply = <&vreg_s1c_1p86>;
+ vdd-l7-bob-supply = <&vreg_bob>;
+
+ vreg_s1e_1p25: smps1 {
+ regulator-name = "vreg_s1e_1p25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1280000>;
+ };
+
+ vreg_s2e_0p85: smps2 {
+ regulator-name = "vreg_s2e_0p85";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <976000>;
+ };
+
+ vreg_s3e_2p20: smps3 {
+ regulator-name = "vreg_s3e_2p20";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2352000>;
+ };
+
+ vreg_l1e_0p9: ldo1 {
+ regulator-name = "vreg_l1e_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ };
+
+ vreg_l2e_1p2: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vreg_l4e_1p7: ldo4 {
+ regulator-name = "vreg_l4e_1p7";
+ regulator-min-microvolt = <1776000>;
+ regulator-max-microvolt = <1872000>;
+ };
+
+ vreg_l5e_0p8: ldo5 {
+ regulator-name = "vreg_l5e_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ vreg_l6e_0p8: ldo6 {
+ regulator-name = "vreg_l6e_0p8";
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <904000>;
+ };
+
+ vreg_l7e_2p8: ldo7 {
+ regulator-name = "vreg_l7e_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
};
&cdsp {
--
2.39.2
next prev parent reply other threads:[~2023-08-25 21:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-25 21:45 [PATCH 1/3] arm64: dts: qcom: sm8350: fix pinctrl for UART18 Dmitry Baryshkov
2023-08-25 21:45 ` [PATCH 2/3] arm64: dts: qcom: sm8350-hdk: add missing PMICs Dmitry Baryshkov
2023-08-25 21:50 ` Konrad Dybcio
2023-08-25 21:45 ` Dmitry Baryshkov [this message]
2023-08-26 9:03 ` [PATCH 3/3] arm64: dts: qcom: sm8350-hdk: add pmr735a regulators Konrad Dybcio
2023-08-25 21:50 ` [PATCH 1/3] arm64: dts: qcom: sm8350: fix pinctrl for UART18 Konrad Dybcio
2023-09-20 3:58 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230825214550.1650938-3-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).