[PATCH 4/4] phy: qualcomm: phy-qcom-eusb2-repeater: Add tuning overrides

[Konrad Dybcio <konrad.dybcio@linaro.org>]

There are devices in the wild, like the Sony Xperia 1 V that *require*
different tuning than the base design for USB to work.

Add support for overriding the necessary tuning values.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
index 645f0e95703a..53e10feb16a1 100644
--- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
+++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
@@ -141,7 +141,9 @@ static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr)
 static int eusb2_repeater_init(struct phy *phy)
 {
 	struct eusb2_repeater *rptr = phy_get_drvdata(phy);
-	const u32 *init_tbl = rptr->cfg->init_tbl;
+	struct device_node *np = rptr->dev->of_node;
+	u32 init_tbl[F_NUM_TUNE_FIELDS] = { 0 };
+	u8 override;
 	u32 val;
 	int ret;
 	int i;
@@ -152,6 +154,17 @@ static int eusb2_repeater_init(struct phy *phy)
 
 	regmap_field_update_bits(rptr->regs[F_EN_CTL1], EUSB2_RPTR_EN, EUSB2_RPTR_EN);
 
+	memcpy(init_tbl, rptr->cfg->init_tbl, sizeof(init_tbl));
+
+	if (!of_property_read_u8(np, "qcom,tune-iusb2-value", &override))
+		init_tbl[F_TUNE_IUSB2] = override;
+
+	if (!of_property_read_u8(np, "qcom,tune-hsdisc-value", &override))
+		init_tbl[F_TUNE_HSDISC] = override;
+
+	if (!of_property_read_u8(np, "qcom,tune-usb2-preem-value", &override))
+		init_tbl[F_TUNE_USB2_PREEM] = override;
+
 	for (i = 0; i < F_NUM_TUNE_FIELDS; i++)
 		regmap_field_update_bits(rptr->regs[i], init_tbl[i], init_tbl[i]);
 

-- 
2.42.0