Re: [PATCH v11 2/4] arm64: dts: qcom: ipq5332: Add USB related nodes

[Varadarajan Narayanan <quic_varada@quicinc.com>]

> > +               usb: usb@8af8800 {
> > +                       compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
> > +                       reg = <0x08af8800 0x400>;
> > +
> > +                       interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> > +                       interrupt-names = "hs_phy_irq";
> > +
> > +                       clocks = <&gcc GCC_USB0_MASTER_CLK>,
> > +                                <&gcc GCC_SNOC_USB_CLK>,
> > +                                <&gcc GCC_USB0_SLEEP_CLK>,
> > +                                <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> > +                       clock-names = "core",
> > +                                     "iface",
> > +                                     "sleep",
> > +                                     "mock_utmi";
> > +
> > +                       resets = <&gcc GCC_USB_BCR>;
> > +
> > +                       qcom,select-utmi-as-pipe-clk;
> > +
> > +                       #address-cells = <1>;
> > +                       #size-cells = <1>;
> > +                       ranges;
> > +
> > +                       status = "disabled";
> > +
> > +                       usb2_0_dwc: usb@8a00000 {
>
> Since we have just seen a patch series adding USB 3 support to
> ipq5332, we know that the host is not 2.0-only. Thus the `2_0` part of
> the label doesn't make sense.
>
> Could you please change the label to be just usb_dwc (or usb0_dwc)?

Have posted v12 addressing this. Please take a look.

Thanks
Varada