[PATCH 1/3] dt-bindings: usb: gpio-sbu-mux: Add an entry for CBDTU02043

[PATCH 1/3] dt-bindings: usb: gpio-sbu-mux: Add an entry for CBDTU02043

[Fabio Estevam]

From: Fabio Estevam <festevam@denx.de>

Add a compatible entry for the NXP CBDTU02043 GPIO-based mux hardware
used for connecting, disconnecting and switching orientation of
the SBU lines in USB Type-C applications.

CBTU02043 datasheet: https://www.nxp.com/docs/en/data-sheet/CBTU02043.pdf

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
index f196beb826d8..b61dcf8b4aad 100644
--- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
+++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
@@ -19,6 +19,7 @@ properties:
   compatible:
     items:
       - enum:
+          - nxp,cbdtu02043
           - onnn,fsusb43l10x
           - pericom,pi3usb102
       - const: gpio-sbu-mux
-- 
2.34.1

[PATCH 2/3] arm64: dts: imx8qxp-mek: Fix gpio-sbu-mux compatible

[Fabio Estevam]

From: Fabio Estevam <festevam@denx.de>

Per gpio-sbu-mux.yaml, the compatible entry is incomplete.

The imx8qxp-mek board uses a CBDTU02043, so complete the gpio-sbu-mux
compatible accordingly.

This fixes the following schema warning:

imx8qxp-mek.dtb: gpio-sbu-mux: compatible:0: 'gpio-sbu-mux' is not one of ['onnn,fsusb43l10x', 'pericom,pi3usb102']
	from schema $id: http://devicetree.org/schemas/usb/gpio-sbu-mux.yaml#
	
Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 7924b0969ad8..a06a6491ef20 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -31,7 +31,7 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
 	};
 
 	gpio-sbu-mux {
-		compatible = "gpio-sbu-mux";
+		compatible = "nxp,cbdtu02043","gpio-sbu-mux";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec_mux>;
 		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
-- 
2.34.1

Re: [PATCH 2/3] arm64: dts: imx8qxp-mek: Fix gpio-sbu-mux compatible

[Krzysztof Kozlowski]

On 09/09/2023 22:29, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> Per gpio-sbu-mux.yaml, the compatible entry is incomplete.
> 
> The imx8qxp-mek board uses a CBDTU02043, so complete the gpio-sbu-mux
> compatible accordingly.
> 
> This fixes the following schema warning:
> 
> imx8qxp-mek.dtb: gpio-sbu-mux: compatible:0: 'gpio-sbu-mux' is not one of ['onnn,fsusb43l10x', 'pericom,pi3usb102']
> 	from schema $id: http://devicetree.org/schemas/usb/gpio-sbu-mux.yaml#
> 	
> Signed-off-by: Fabio Estevam <festevam@denx.de>
> ---
>  arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> index 7924b0969ad8..a06a6491ef20 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> @@ -31,7 +31,7 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
>  	};
>  
>  	gpio-sbu-mux {
> -		compatible = "gpio-sbu-mux";
> +		compatible = "nxp,cbdtu02043","gpio-sbu-mux";

Missing space after ,

Best regards,
Krzysztof

[PATCH 3/3] arm64: dts: imx8qxp-mek: Pass gpio-sbu-mux mode-switch

[Fabio Estevam]

From: Fabio Estevam <festevam@denx.de>

Per gpio-sbu-mux.yaml, the 'mode-switch' property is mandatory.

Pass it to fix the following schema warning:

imx8qxp-mek.dtb: gpio-sbu-mux: 'mode-switch' is a required property
	from schema $id: http://devicetree.org/schemas/usb/gpio-sbu-mux.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index a06a6491ef20..f95b58c69c6a 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -36,6 +36,7 @@ gpio-sbu-mux {
 		pinctrl-0 = <&pinctrl_typec_mux>;
 		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
 		enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>;
+		mode-switch;
 		orientation-switch;
 
 		port {
-- 
2.34.1

Re: [PATCH 1/3] dt-bindings: usb: gpio-sbu-mux: Add an entry for CBDTU02043

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 1134 bytes --]

On Sat, Sep 09, 2023 at 05:29:55PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> Add a compatible entry for the NXP CBDTU02043 GPIO-based mux hardware
> used for connecting, disconnecting and switching orientation of
> the SBU lines in USB Type-C applications.
> 
> CBTU02043 datasheet: https://www.nxp.com/docs/en/data-sheet/CBTU02043.pdf
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>
> ---
>  Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
> index f196beb826d8..b61dcf8b4aad 100644
> --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
> +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
> @@ -19,6 +19,7 @@ properties:
>    compatible:
>      items:
>        - enum:
> +          - nxp,cbdtu02043
>            - onnn,fsusb43l10x
>            - pericom,pi3usb102
>        - const: gpio-sbu-mux

Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]