[PATCH v3] mux: mmio: use reg property when parent device is not a syscon

[Andrew Davis <afd@ti.com>]

The DT binding for the reg-mux compatible states it can be used when the
"parent device of mux controller is not syscon device". It also allows
for a reg property. When the reg property is provided, use that to
identify the address space for this mux. If not provided fallback to
using the parent device as a regmap provider.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
---

Changes from v2:
 - Rebased on v6.6-rc1

Changes from v1:
 - Flip logic as suggested in v1[0]

[0] https://lore.kernel.org/lkml/1c27d9d4-b1cc-c158-90f7-f7e47e02c424@ti.com/T/

 drivers/mux/mmio.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/mux/mmio.c b/drivers/mux/mmio.c
index fd1d121a584ba..b6095b7853ed2 100644
--- a/drivers/mux/mmio.c
+++ b/drivers/mux/mmio.c
@@ -44,10 +44,13 @@ static int mux_mmio_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	if (of_device_is_compatible(np, "mmio-mux"))
+	if (of_device_is_compatible(np, "mmio-mux")) {
 		regmap = syscon_node_to_regmap(np->parent);
-	else
-		regmap = dev_get_regmap(dev->parent, NULL) ?: ERR_PTR(-ENODEV);
+	} else {
+		regmap = device_node_to_regmap(np);
+		if (IS_ERR(regmap))
+			regmap = dev_get_regmap(dev->parent, NULL) ?: ERR_PTR(-ENODEV);
+	}
 	if (IS_ERR(regmap)) {
 		ret = PTR_ERR(regmap);
 		dev_err(dev, "failed to get regmap: %d\n", ret);
-- 
2.39.2