From: Yang Chen <yangchen.openbmc@gmail.com>
To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
joel@jms.id.au, andrew@aj.id.au, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Cc: patrick@stwcx.xyz, Jerry.Lin@quantatw.com,
Eddie.Chen@quantatw.com, EasonChen1@quantatw.com,
yangchen.openbmc@gmail.com
Subject: [PATCH v2 2/2] ARM: dts: aspeed: Minerva: Add Facebook Minerva CMC board
Date: Thu, 14 Sep 2023 20:56:48 +0800 [thread overview]
Message-ID: <20230914125648.3966519-3-yangchen.openbmc@gmail.com> (raw)
In-Reply-To: <20230914125648.3966519-1-yangchen.openbmc@gmail.com>
Add linux device tree entry related to the Minerva Chassis Management
Controller (CMC) specific devices connected to the Aspeed SoC (AST2600).
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed-bmc-facebook-minerva-cmc.dts | 265 ++++++++++++++++++
2 files changed, 266 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 23cbc7203a8e..d3ac20e316d0 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-fuji.dtb \
aspeed-bmc-facebook-galaxy100.dtb \
aspeed-bmc-facebook-greatlakes.dtb \
+ aspeed-bmc-facebook-minerva-cmc.dtb \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-facebook-wedge40.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts
new file mode 100644
index 000000000000..3c389fdf58a5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2023 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Minerva CMC";
+ compatible = "facebook,minerva-cmc", "aspeed,ast2600";
+
+ aliases {
+ serial5 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial5:57600n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+};
+
+&uart6 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ use-ncsi;
+ mlx,multi-host;
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sgpiom1 {
+ status = "okay";
+ ngpios = <128>;
+ bus-frequency = <2000000>;
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ temperature-sensor@4B {
+ compatible = "ti,tmp75";
+ reg = <0x4B>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&i2c14 {
+ status = "okay";
+ multi-master;
+
+ ipmb@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+};
+
+&adc0 {
+ aspeed,int-vref-microvolt = <2500000>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ aspeed,int-vref-microvolt = <2500000>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
--
2.34.1
next prev parent reply other threads:[~2023-09-14 12:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-14 12:56 [PATCH v2 0/2] Add CMC of Facebook Minerva platform Yang Chen
2023-09-14 12:56 ` [PATCH v2 1/2] dt-bindings: arm: aspeed: document board compatibles Yang Chen
2023-09-14 12:56 ` Yang Chen [this message]
2023-09-27 2:47 ` [PATCH v2 2/2] ARM: dts: aspeed: Minerva: Add Facebook Minerva CMC board Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230914125648.3966519-3-yangchen.openbmc@gmail.com \
--to=yangchen.openbmc@gmail.com \
--cc=EasonChen1@quantatw.com \
--cc=Eddie.Chen@quantatw.com \
--cc=Jerry.Lin@quantatw.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@stwcx.xyz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).