* [PATCH v4 1/2] dt-bindings: arm64: mediatek: add mt8390-evk board @ 2023-09-15 8:12 Macpaul Lin 2023-09-15 8:12 ` [PATCH v4 2/2] arm64: dts: mediatek: add device-tree for Genio 700 EVK board Macpaul Lin 0 siblings, 1 reply; 3+ messages in thread From: Macpaul Lin @ 2023-09-15 8:12 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno, Macpaul Lin, Bernhard Rosenkränzer, devicetree, linux-kernel, linux-arm-kernel, linux-mediatek Cc: Bear Wang, Pablo Sun, Macpaul Lin 1. Add compatible for MT8390. 2. Add bindings for the MediaTek mt8390-evk board, also known as the "Genio 700-EVK". The MT8390 and MT8188 belong to the same SoC family, with only minor differences in their physical characteristics. They utilize unique efuse values for differentiation. The booting process and configurations are managed by boot loaders, firmware, and TF-A. Consequently, the part numbers and procurement channels vary. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- Documentation/devicetree/bindings/arm/mediatek.yaml | 5 +++++ 1 file changed, 5 insertions(+) dependencies for v1: - This patch should be applied after the following patch set - mt8365's bindings - https://lore.kernel.org/linux-arm-kernel/20230912092444.31635-1-macpaul.lin@mediatek.com/T/ - mt8395's bindings: v6 - https://lore.kernel.org/lkml/20230911115717.26184-1-macpaul.lin@mediatek.com/T/ - mt8188's bindings - https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/ Changes for v2: - drop description for multiple boards - update dependencies with the following patch sets - mt8395's bindings: v7 - https://lore.kernel.org/linux-arm-kernel/20230913032057.3197-1-macpaul.lin@mediatek.com/T/ Changes for v3: - drop "dts: " in $subject by Conor's suggestion. - Update "Reviewed-by" and "Acked-by" tags, Thanks. - update dependencies with the following patch sets - mt8395's bindings: v8 - https://lore.kernel.org/lkml/20230914055145.16801-1-macpaul.lin@mediatek.com/T/ Changes for v4: - add more "Reviewed-by" tag, Thanks. diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 0248bb458180..3968d5934fa2 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -252,6 +252,11 @@ properties: - enum: - mediatek,mt8365-evk - const: mediatek,mt8365 + - items: + - enum: + - mediatek,mt8390-evk + - const: mediatek,mt8390 + - const: mediatek,mt8188 - items: - enum: - mediatek,mt8395-evk -- 2.18.0 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v4 2/2] arm64: dts: mediatek: add device-tree for Genio 700 EVK board 2023-09-15 8:12 [PATCH v4 1/2] dt-bindings: arm64: mediatek: add mt8390-evk board Macpaul Lin @ 2023-09-15 8:12 ` Macpaul Lin 2023-09-22 6:50 ` Chen-Yu Tsai 0 siblings, 1 reply; 3+ messages in thread From: Macpaul Lin @ 2023-09-15 8:12 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno, Macpaul Lin, Bernhard Rosenkränzer, devicetree, linux-kernel, linux-arm-kernel, linux-mediatek Cc: Bear Wang, Pablo Sun, Macpaul Lin, Chris-QJ Chen Add basic device-tree for the Genio 700 EVK board. The Genio 700 EVK is based on MediaTek MT8390 SoC. MT8390 hardware register maps are identical to MT8188. The Genio 700 EVK has following features: - MT8390 SoC - MT6365 PMIC - MT6319 Buck IC - 12V DC Jack - 2x4GB LPDDR4X - 64GB eMMC 5.1 - 64Mb SPI NOR - M.2 Key A-E slot with PCIe Gen2 and USB 2.0 - 2x DSI LCM ports - 2x touch sensor ports - 2x MIPI-CSI, as camera daughter board slots - USB 2 micro USB connector - USB 3 with 1 to 2 hub: - M.2 Key B slot - Type-C connector, with DisplayPort over Type-C - HDMI 2.0 TX port with Type A HDMI connector - eDP port - Gigabit Ethernet with RJ45 connector - SD card slot - Earphone Jack - Analog Microphone - 2x Digital Microphone - 3x UART with serial-to-usb converters and micro USB connectors Signed-off-by: Chris-QJ Chen <chris-qj.chen@mediatek.com> Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- arch/arm64/boot/dts/mediatek/Makefile | 1 + .../dts/mediatek/mt8390-genio-700-evk.dts | 880 ++++++++++++++++++ 2 files changed, 881 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts dependencies for v1: - This patch should be applied after the following patch set - mt8365-gneio-350-evk's dts change (v4) - https://lore.kernel.org/linux-arm-kernel/20230912092444.31635-1-macpaul.lin@mediatek.com/T/ - mt8395-genio-1200-evk's dts basic support (v6) - https://lore.kernel.org/lkml/20230911115717.26184-1-macpaul.lin@mediatek.com/T/ - mt8188 platform's basic support - https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/ changes for v2: - Fix gpio defines '0' to 'GPIO_ACTIVE_HIGH'. - Drop duplicate name: 'default' for I2C4. - Update dependencies - mt8365-gneio-350-evk's dts change (v5) - https://lore.kernel.org/lkml/20230913032226.4092-1-macpaul.lin@mediatek.com/ - mt8395-genio-1200-evk's dts basic support (v7) - https://lore.kernel.org/linux-arm-kernel/20230913032057.3197-1-macpaul.lin@mediatek.com/T/ - mt8188 platform's basic support (v4) - https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/ changes for v3: - No change. - Update dependencies - mt8365-gneio-350-evk's dts change (v5) - https://lore.kernel.org/lkml/20230913032226.4092-1-macpaul.lin@mediatek.com/ - mt8395-genio-1200-evk's dts basic support (v8) - https://lore.kernel.org/lkml/20230914055145.16801-1-macpaul.lin@mediatek.com/T/ - mt8188 platform's basic support (v4) - https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/ changes for v4: - Fix 'interrupts' of touchscreen on i2c0 to 'interrupts-extended'. - Add 'Reviewed-by' tag, Thanks! diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 22f362bbbdac..3262849c0f6b 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -54,5 +54,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-genio-350-evk.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts new file mode 100644 index 000000000000..6bb1d5d112ef --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts @@ -0,0 +1,880 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 MediaTek Inc. + * Author: Chris Chen <chris-qj.chen@mediatek.com> + * Pablo Sun <pablo.sun@mediatek.com> + * Macpaul Lin <macpaul.lin@mediatek.com> + */ +/dts-v1/; + +#include "mt8188.dtsi" +#include "mt6359.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/usb/pd.h> + +/ { + model = "MediaTek Genio-700 EVK"; + compatible = "mediatek,mt8390-evk", "mediatek,mt8390", + "mediatek,mt8188"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0x2 0x00000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_reserved: memory@54600000 { + no-map; + reg = <0 0x54600000 0x0 0x200000>; + }; + + apu_mem: memory@55000000 { + compatible = "shared-dma-pool"; + reg = <0 0x55000000 0 0x1400000>; /* 20 MB */ + }; + + vpu_mem: memory@57000000 { + compatible = "shared-dma-pool"; + reg = <0 0x57000000 0 0x1400000>; /* 20 MB */ + }; + }; + + common_fixed_5v: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "5v_en"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + edp_panel_fixed_3v3: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "edp_panel_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_panel_3v3_en_pins>; + }; + + gpio_fixed_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "gpio_3v3_en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + sdio_fixed_1v8: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "sdio_io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + regulator-always-on; + }; + + sdio_fixed_3v3: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "sdio_card"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + touch0_fixed_3v3: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "touch_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 119 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_hub_fixed_3v3: regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "usb_hub_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */ + startup-delay-us = <10000>; + enable-active-high; + }; + + usb_hub_reset_1v8: regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "usb_hub_reset"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 7 GPIO_ACTIVE_HIGH>; /* HUB_RESET */ + vin-supply = <&usb_hub_fixed_3v3>; + }; + + usb_p0_vbus: regulator-8 { + compatible = "regulator-fixed"; + regulator-name = "usb_p0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 84 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_p1_vbus: regulator-9 { + compatible = "regulator-fixed"; + regulator-name = "usb_p1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_p2_vbus: regulator-10 { + compatible = "regulator-fixed"; + regulator-name = "usb_p2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt9271"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&touch0_fixed_3v3>; + VDDIO-supply = <&mt6359_vio18_ldo_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_pins>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + pinctrl-1 = <&rt1715_int_pins>; + clock-frequency = <1000000>; + status = "okay"; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + supports-cqe; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x1481b>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + non-removable; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_default_pins>; + pinctrl-1 = <&mmc1_uhs_pins>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + no-mmc; + no-sdio; + cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>; + vmmc-supply = <&mt6359_vpa_buck_reg>; + vqmmc-supply = <&mt6359_vsim1_ldo_reg>; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcn18_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcn33_2_bt_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vpa_buck_reg { + regulator-max-microvolt = <3100000>; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&mt6359_vsim1_ldo_reg { + regulator-enable-ramp-delay = <480>; +}; + +&mt6359_vufs_ldo_reg { + regulator-always-on; +}; + +&mt6359codec { + mediatek,mic-type-0 = <1>; /* ACC */ + mediatek,mic-type-1 = <3>; /* DCC */ +}; + +&pio { + audio_default_pins: audio-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>, + <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>, + <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>, + <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>, + <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>, + <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>, + <PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>, + <PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>, + <PINMUX_GPIO109__FUNC_B0_I2SIN_WS>, + <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>, + <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>, + <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>, + <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>, + <PINMUX_GPIO117__FUNC_O_I2SO2_D0>, + <PINMUX_GPIO118__FUNC_O_I2SO2_D1>, + <PINMUX_GPIO121__FUNC_B0_PCM_CLK>, + <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>, + <PINMUX_GPIO124__FUNC_I0_PCM_DI>, + <PINMUX_GPIO125__FUNC_O_DMIC1_CLK>, + <PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>, + <PINMUX_GPIO128__FUNC_O_DMIC2_CLK>, + <PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>; + }; + }; + + dptx_pins: dptx-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>; + bias-pull-up; + }; + }; + + edp_panel_3v3_en_pins: edp-panel-3v3-en-pins { + pins1 { + pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>; + output-high; + }; + }; + + eth_default_pins: eth-default-pins { + pins-cc { + pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>, + <PINMUX_GPIO140__FUNC_I0_GBE_RXC>, + <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>, + <PINMUX_GPIO142__FUNC_O_GBE_TXEN>; + drive-strength = <MTK_DRIVE_8mA>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>, + <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>; + drive-strength = <MTK_DRIVE_8mA>; + input-enable; + }; + + pins-power { + pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>, + <PINMUX_GPIO146__FUNC_B_GPIO146>; + output-high; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>, + <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>, + <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>, + <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>; + drive-strength = <MTK_DRIVE_8mA>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>, + <PINMUX_GPIO132__FUNC_O_GBE_TXD2>, + <PINMUX_GPIO133__FUNC_O_GBE_TXD1>, + <PINMUX_GPIO134__FUNC_O_GBE_TXD0>; + drive-strength = <MTK_DRIVE_8mA>; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-cc { + pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>, + <PINMUX_GPIO140__FUNC_B_GPIO140>, + <PINMUX_GPIO141__FUNC_B_GPIO141>, + <PINMUX_GPIO142__FUNC_B_GPIO142>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>, + <PINMUX_GPIO144__FUNC_B_GPIO144>; + input-disable; + bias-disable; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>, + <PINMUX_GPIO136__FUNC_B_GPIO136>, + <PINMUX_GPIO137__FUNC_B_GPIO137>, + <PINMUX_GPIO138__FUNC_B_GPIO138>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>, + <PINMUX_GPIO132__FUNC_B_GPIO132>, + <PINMUX_GPIO133__FUNC_B_GPIO133>, + <PINMUX_GPIO134__FUNC_B_GPIO134>; + }; + }; + + i2c0_pins: i2c0-pins { + pins { + pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>, + <PINMUX_GPIO55__FUNC_B1_SCL0>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c1_pins: i2c1-pins { + pins { + pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>, + <PINMUX_GPIO57__FUNC_B1_SCL1>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c2_pins: i2c2-pins { + pins { + pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>, + <PINMUX_GPIO59__FUNC_B1_SCL2>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c3_pins: i2c3-pins { + pins { + pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>, + <PINMUX_GPIO61__FUNC_B1_SCL3>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c4_pins: i2c4-pins { + pins { + pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>, + <PINMUX_GPIO63__FUNC_B1_SCL4>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c5_pins: i2c5-pins { + pins { + pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>, + <PINMUX_GPIO65__FUNC_B1_SCL5>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c6_pins: i2c6-pins { + pins { + pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>, + <PINMUX_GPIO67__FUNC_B1_SCL6>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + gpio_key_pins: gpio-key-pins { + pins { + pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>, + <PINMUX_GPIO43__FUNC_B1_KPCOL1>, + <PINMUX_GPIO44__FUNC_B1_KPROW0>; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_default_pins: mmc1-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>, + <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>, + <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>, + <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>, + <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-insert { + pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>; + bias-pull-up; + }; + }; + + mmc1_uhs_pins: mmc1-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>, + <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>, + <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>, + <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>, + <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc2_default_pins: mmc2-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>, + <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>, + <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>, + <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>, + <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-pcm { + pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>; + }; + }; + + mmc2_uhs_pins: mmc2-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>, + <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>, + <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>, + <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>, + <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc2_eint_pins: mmc2-eint-pins { + pins-dat1 { + pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc2_dat1_pins: mmc2-dat1-pins { + pins-dat1 { + pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + panel_default_pins: panel-default-pins { + pins-dcdc { + pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>; + output-low; + }; + + pins-en { + pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>; + output-low; + }; + + pins-rst { + pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>; + output-high; + }; + }; + + rt1715_int_pins: rt1715-int-pins { + pins_cmd0_dat { + pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>; + bias-pull-up; + input-enable; + }; + }; + + spi0_pins: spi0-pins { + pins-spi { + pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>, + <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>, + <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>, + <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>; + bias-disable; + }; + }; + + spi1_pins: spi1-pins { + pins-spi { + pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>, + <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>, + <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>, + <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>; + bias-disable; + }; + }; + + spi2_pins: spi2-pins { + pins-spi { + pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>, + <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>, + <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>, + <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>; + bias-disable; + }; + }; + + touch_pins: touch-pins { + pins-irq { + pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>; + input-enable; + bias-disable; + }; + + pins-reset { + pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>; + output-high; + }; + }; + + uart0_pins: uart0-pins { + pins { + pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>, + <PINMUX_GPIO32__FUNC_I1_URXD0>; + bias-pull-up; + }; + }; + + uart1_pins: uart1-pins { + pins { + pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>, + <PINMUX_GPIO34__FUNC_I1_URXD1>; + bias-pull-up; + }; + }; + + uart2_pins: uart2-pins { + pins { + pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>, + <PINMUX_GPIO36__FUNC_I1_URXD2>; + bias-pull-up; + }; + }; + + usb_default_pins: usb-default-pins { + pins-iddig { + pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>; + input-enable; + bias-pull-up; + }; + + pins-valid { + pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>; + input-enable; + }; + + pins-vbus { + pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>; + output-high; + }; + + }; + + usb1_default_pins: usb1-default-pins { + pins-valid { + pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>; + input-enable; + }; + + pins-usb-hub-3v3-en { + pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>; + output-high; + }; + }; + + wifi_pwrseq_pins: wifi-pwrseq-pins { + pins-wifi-enable { + pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>; + output-low; + }; + }; +}; + +&pmic { + interrupt-parent = <&pio>; + interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&scp { + memory-region = <&scp_mem>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spi2 { + pinctrl-0 = <&spi2_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&xhci0 { + status = "okay"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; +}; + +&xhci1 { + status = "okay"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&usb_hub_reset_1v8>; +}; + +&xhci2 { + status = "okay"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; +}; -- 2.18.0 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v4 2/2] arm64: dts: mediatek: add device-tree for Genio 700 EVK board 2023-09-15 8:12 ` [PATCH v4 2/2] arm64: dts: mediatek: add device-tree for Genio 700 EVK board Macpaul Lin @ 2023-09-22 6:50 ` Chen-Yu Tsai 0 siblings, 0 replies; 3+ messages in thread From: Chen-Yu Tsai @ 2023-09-22 6:50 UTC (permalink / raw) To: Macpaul Lin Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno, Bernhard Rosenkränzer, devicetree, linux-kernel, linux-arm-kernel, linux-mediatek, Bear Wang, Pablo Sun, Macpaul Lin, Chris-QJ Chen On Fri, Sep 15, 2023 at 4:13 PM Macpaul Lin <macpaul.lin@mediatek.com> wrote: > > Add basic device-tree for the Genio 700 EVK board. The > Genio 700 EVK is based on MediaTek MT8390 SoC. > MT8390 hardware register maps are identical to MT8188. > > The Genio 700 EVK has following features: > > - MT8390 SoC > - MT6365 PMIC > - MT6319 Buck IC > - 12V DC Jack > - 2x4GB LPDDR4X > - 64GB eMMC 5.1 > - 64Mb SPI NOR > - M.2 Key A-E slot with PCIe Gen2 and USB 2.0 > - 2x DSI LCM ports > - 2x touch sensor ports > - 2x MIPI-CSI, as camera daughter board slots > - USB 2 micro USB connector > - USB 3 with 1 to 2 hub: > - M.2 Key B slot > - Type-C connector, with DisplayPort over Type-C > - HDMI 2.0 TX port with Type A HDMI connector > - eDP port > - Gigabit Ethernet with RJ45 connector > - SD card slot > - Earphone Jack > - Analog Microphone > - 2x Digital Microphone > - 3x UART with serial-to-usb converters and micro USB connectors > > Signed-off-by: Chris-QJ Chen <chris-qj.chen@mediatek.com> > Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > --- > arch/arm64/boot/dts/mediatek/Makefile | 1 + > .../dts/mediatek/mt8390-genio-700-evk.dts | 880 ++++++++++++++++++ > 2 files changed, 881 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts > > dependencies for v1: > - This patch should be applied after the following patch set > - mt8365-gneio-350-evk's dts change (v4) > - https://lore.kernel.org/linux-arm-kernel/20230912092444.31635-1-macpaul.lin@mediatek.com/T/ > - mt8395-genio-1200-evk's dts basic support (v6) > - https://lore.kernel.org/lkml/20230911115717.26184-1-macpaul.lin@mediatek.com/T/ > - mt8188 platform's basic support > - https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/ > > changes for v2: > - Fix gpio defines '0' to 'GPIO_ACTIVE_HIGH'. > - Drop duplicate name: 'default' for I2C4. > - Update dependencies > - mt8365-gneio-350-evk's dts change (v5) > - https://lore.kernel.org/lkml/20230913032226.4092-1-macpaul.lin@mediatek.com/ > - mt8395-genio-1200-evk's dts basic support (v7) > - https://lore.kernel.org/linux-arm-kernel/20230913032057.3197-1-macpaul.lin@mediatek.com/T/ > - mt8188 platform's basic support (v4) > - https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/ > > changes for v3: > - No change. > - Update dependencies > - mt8365-gneio-350-evk's dts change (v5) > - https://lore.kernel.org/lkml/20230913032226.4092-1-macpaul.lin@mediatek.com/ > - mt8395-genio-1200-evk's dts basic support (v8) > - https://lore.kernel.org/lkml/20230914055145.16801-1-macpaul.lin@mediatek.com/T/ > - mt8188 platform's basic support (v4) > - https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/ > > changes for v4: > - Fix 'interrupts' of touchscreen on i2c0 to 'interrupts-extended'. > - Add 'Reviewed-by' tag, Thanks! > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 22f362bbbdac..3262849c0f6b 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -54,5 +54,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-genio-350-evk.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts > new file mode 100644 > index 000000000000..6bb1d5d112ef > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts > @@ -0,0 +1,880 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +/* > + * Copyright (C) 2023 MediaTek Inc. > + * Author: Chris Chen <chris-qj.chen@mediatek.com> > + * Pablo Sun <pablo.sun@mediatek.com> > + * Macpaul Lin <macpaul.lin@mediatek.com> > + */ > +/dts-v1/; > + > +#include "mt8188.dtsi" > +#include "mt6359.dtsi" > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> > +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> > +#include <dt-bindings/spmi/spmi.h> > +#include <dt-bindings/usb/pd.h> > + > +/ { > + model = "MediaTek Genio-700 EVK"; > + compatible = "mediatek,mt8390-evk", "mediatek,mt8390", > + "mediatek,mt8188"; > + > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:921600n8"; > + }; > + > + firmware { > + optee { > + compatible = "linaro,optee-tz"; > + method = "smc"; > + }; > + }; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0 0x40000000 0x2 0x00000000>; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + /* > + * 12 MiB reserved for OP-TEE (BL32) > + * +-----------------------+ 0x43e0_0000 > + * | SHMEM 2MiB | > + * +-----------------------+ 0x43c0_0000 > + * | | TA_RAM 8MiB | > + * + TZDRAM +--------------+ 0x4340_0000 > + * | | TEE_RAM 2MiB | > + * +-----------------------+ 0x4320_0000 > + */ > + optee_reserved: optee@43200000 { > + no-map; > + reg = <0 0x43200000 0 0x00c00000>; > + }; > + > + scp_mem: memory@50000000 { > + compatible = "shared-dma-pool"; > + reg = <0 0x50000000 0 0x2900000>; > + no-map; > + }; > + > + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ > + bl31_secmon_reserved: memory@54600000 { > + no-map; > + reg = <0 0x54600000 0x0 0x200000>; > + }; > + > + apu_mem: memory@55000000 { > + compatible = "shared-dma-pool"; > + reg = <0 0x55000000 0 0x1400000>; /* 20 MB */ > + }; > + > + vpu_mem: memory@57000000 { > + compatible = "shared-dma-pool"; > + reg = <0 0x57000000 0 0x1400000>; /* 20 MB */ > + }; > + }; > + > + common_fixed_5v: regulator-0 { > + compatible = "regulator-fixed"; > + regulator-name = "5v_en"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&pio 10 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-always-on; > + }; > + > + edp_panel_fixed_3v3: regulator-1 { > + compatible = "regulator-fixed"; > + regulator-name = "edp_panel_3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + enable-active-high; > + gpio = <&pio 15 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&edp_panel_3v3_en_pins>; > + }; > + > + gpio_fixed_3v3: regulator-2 { > + compatible = "regulator-fixed"; > + regulator-name = "gpio_3v3_en"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&pio 9 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-always-on; > + }; > + > + sdio_fixed_1v8: regulator-3 { > + compatible = "regulator-fixed"; > + regulator-name = "sdio_io"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + enable-active-high; > + regulator-always-on; > + }; > + > + sdio_fixed_3v3: regulator-4 { > + compatible = "regulator-fixed"; > + regulator-name = "sdio_card"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&pio 74 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-always-on; > + }; > + > + touch0_fixed_3v3: regulator-5 { > + compatible = "regulator-fixed"; > + regulator-name = "touch_3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&pio 119 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + usb_hub_fixed_3v3: regulator-6 { > + compatible = "regulator-fixed"; > + regulator-name = "usb_hub_3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */ > + startup-delay-us = <10000>; > + enable-active-high; > + }; > + > + usb_hub_reset_1v8: regulator-7 { > + compatible = "regulator-fixed"; > + regulator-name = "usb_hub_reset"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + gpio = <&pio 7 GPIO_ACTIVE_HIGH>; /* HUB_RESET */ > + vin-supply = <&usb_hub_fixed_3v3>; > + }; > + > + usb_p0_vbus: regulator-8 { > + compatible = "regulator-fixed"; > + regulator-name = "usb_p0_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&pio 84 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + usb_p1_vbus: regulator-9 { > + compatible = "regulator-fixed"; > + regulator-name = "usb_p1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&pio 87 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + usb_p2_vbus: regulator-10 { > + compatible = "regulator-fixed"; > + regulator-name = "usb_p2_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + enable-active-high; > + }; Please try to provide supplies for all the fixed regulators if possible? > +}; > + > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins>; > + clock-frequency = <400000>; > + status = "okay"; > + > + touchscreen@5d { > + compatible = "goodix,gt9271"; > + reg = <0x5d>; > + interrupt-parent = <&pio>; > + interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>; > + irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; > + AVDD28-supply = <&touch0_fixed_3v3>; > + VDDIO-supply = <&mt6359_vio18_ldo_reg>; > + pinctrl-names = "default"; > + pinctrl-0 = <&touch_pins>; > + }; > +}; > + > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins>; > + clock-frequency = <400000>; > + status = "okay"; > +}; > + > +&i2c2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c2_pins>; > + clock-frequency = <400000>; > + status = "okay"; > +}; > + > +&i2c3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c3_pins>; > + clock-frequency = <400000>; > + status = "okay"; > +}; > + > +&i2c4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c4_pins>; > + pinctrl-1 = <&rt1715_int_pins>; > + clock-frequency = <1000000>; > + status = "okay"; > +}; > + > +&i2c5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c5_pins>; > + clock-frequency = <400000>; > + status = "okay"; > +}; > + > +&i2c6 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c6_pins>; > + clock-frequency = <400000>; > + status = "okay"; > +}; Are all these I2C controllers used or connected to something? Are they on dedicated headers or a generic Raspberry-Pi-like GPIO header? > +&mmc0 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc0_default_pins>; > + pinctrl-1 = <&mmc0_uhs_pins>; > + bus-width = <8>; > + max-frequency = <200000000>; > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + supports-cqe; > + cap-mmc-hw-reset; > + no-sdio; > + no-sd; > + hs400-ds-delay = <0x1481b>; > + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; > + vqmmc-supply = <&mt6359_vufs_ldo_reg>; > + non-removable; > +}; > + > +&mmc1 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc1_default_pins>; > + pinctrl-1 = <&mmc1_uhs_pins>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + no-mmc; > + no-sdio; > + cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>; > + vmmc-supply = <&mt6359_vpa_buck_reg>; > + vqmmc-supply = <&mt6359_vsim1_ldo_reg>; > +}; > + > +&mt6359_vbbck_ldo_reg { > + regulator-always-on; > +}; > + > +&mt6359_vcn18_ldo_reg { > + regulator-always-on; > +}; > + > +&mt6359_vcn33_2_bt_ldo_reg { > + regulator-always-on; > +}; > + > +&mt6359_vcore_buck_reg { > + regulator-always-on; > +}; > + > +&mt6359_vgpu11_buck_reg { > + regulator-always-on; > +}; > + > +&mt6359_vpa_buck_reg { > + regulator-max-microvolt = <3100000>; > +}; > + > +&mt6359_vpu_buck_reg { > + regulator-always-on; > +}; > + > +&mt6359_vrf12_ldo_reg { > + regulator-always-on; > +}; > + > +&mt6359_vsim1_ldo_reg { > + regulator-enable-ramp-delay = <480>; > +}; > + > +&mt6359_vufs_ldo_reg { > + regulator-always-on; > +}; > + > +&mt6359codec { > + mediatek,mic-type-0 = <1>; /* ACC */ > + mediatek,mic-type-1 = <3>; /* DCC */ > +}; > + > +&pio { > + audio_default_pins: audio-default-pins { > + pins-cmd-dat { > + pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>, > + <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>, > + <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>, > + <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>, > + <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>, > + <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>, > + <PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>, > + <PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>, > + <PINMUX_GPIO109__FUNC_B0_I2SIN_WS>, > + <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>, > + <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>, > + <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>, > + <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>, > + <PINMUX_GPIO117__FUNC_O_I2SO2_D0>, > + <PINMUX_GPIO118__FUNC_O_I2SO2_D1>, > + <PINMUX_GPIO121__FUNC_B0_PCM_CLK>, > + <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>, > + <PINMUX_GPIO124__FUNC_I0_PCM_DI>, > + <PINMUX_GPIO125__FUNC_O_DMIC1_CLK>, > + <PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>, > + <PINMUX_GPIO128__FUNC_O_DMIC2_CLK>, > + <PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>; > + }; > + }; > + > + dptx_pins: dptx-pins { > + pins-cmd-dat { > + pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>; > + bias-pull-up; > + }; > + }; > + > + edp_panel_3v3_en_pins: edp-panel-3v3-en-pins { > + pins1 { > + pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>; > + output-high; > + }; > + }; > + > + eth_default_pins: eth-default-pins { > + pins-cc { > + pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>, > + <PINMUX_GPIO140__FUNC_I0_GBE_RXC>, > + <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>, > + <PINMUX_GPIO142__FUNC_O_GBE_TXEN>; > + drive-strength = <MTK_DRIVE_8mA>; > + }; > + > + pins-mdio { > + pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>, > + <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>; > + drive-strength = <MTK_DRIVE_8mA>; > + input-enable; > + }; > + > + pins-power { > + pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>, > + <PINMUX_GPIO146__FUNC_B_GPIO146>; > + output-high; > + }; > + > + pins-rxd { > + pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>, > + <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>, > + <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>, > + <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>; > + drive-strength = <MTK_DRIVE_8mA>; > + }; > + > + pins-txd { > + pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>, > + <PINMUX_GPIO132__FUNC_O_GBE_TXD2>, > + <PINMUX_GPIO133__FUNC_O_GBE_TXD1>, > + <PINMUX_GPIO134__FUNC_O_GBE_TXD0>; > + drive-strength = <MTK_DRIVE_8mA>; > + }; > + }; > + > + eth_sleep_pins: eth-sleep-pins { > + pins-cc { > + pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>, > + <PINMUX_GPIO140__FUNC_B_GPIO140>, > + <PINMUX_GPIO141__FUNC_B_GPIO141>, > + <PINMUX_GPIO142__FUNC_B_GPIO142>; > + }; > + > + pins-mdio { > + pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>, > + <PINMUX_GPIO144__FUNC_B_GPIO144>; > + input-disable; > + bias-disable; > + }; > + > + pins-rxd { > + pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>, > + <PINMUX_GPIO136__FUNC_B_GPIO136>, > + <PINMUX_GPIO137__FUNC_B_GPIO137>, > + <PINMUX_GPIO138__FUNC_B_GPIO138>; > + }; > + > + pins-txd { > + pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>, > + <PINMUX_GPIO132__FUNC_B_GPIO132>, > + <PINMUX_GPIO133__FUNC_B_GPIO133>, > + <PINMUX_GPIO134__FUNC_B_GPIO134>; > + }; > + }; > + > + i2c0_pins: i2c0-pins { > + pins { > + pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>, > + <PINMUX_GPIO55__FUNC_B1_SCL0>; > + bias-pull-up = <MTK_PULL_SET_RSEL_011>; > + drive-strength-microamp = <1000>; > + }; > + }; > + > + i2c1_pins: i2c1-pins { > + pins { > + pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>, > + <PINMUX_GPIO57__FUNC_B1_SCL1>; > + bias-pull-up = <MTK_PULL_SET_RSEL_011>; > + drive-strength-microamp = <1000>; > + }; > + }; > + > + i2c2_pins: i2c2-pins { > + pins { > + pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>, > + <PINMUX_GPIO59__FUNC_B1_SCL2>; > + bias-pull-up = <MTK_PULL_SET_RSEL_011>; > + drive-strength-microamp = <1000>; > + }; > + }; > + > + i2c3_pins: i2c3-pins { > + pins { > + pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>, > + <PINMUX_GPIO61__FUNC_B1_SCL3>; > + bias-pull-up = <MTK_PULL_SET_RSEL_011>; > + drive-strength-microamp = <1000>; > + }; > + }; > + > + i2c4_pins: i2c4-pins { > + pins { > + pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>, > + <PINMUX_GPIO63__FUNC_B1_SCL4>; > + bias-pull-up = <MTK_PULL_SET_RSEL_011>; > + drive-strength-microamp = <1000>; > + }; > + }; > + > + i2c5_pins: i2c5-pins { > + pins { > + pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>, > + <PINMUX_GPIO65__FUNC_B1_SCL5>; > + bias-pull-up = <MTK_PULL_SET_RSEL_011>; > + drive-strength-microamp = <1000>; > + }; > + }; > + > + i2c6_pins: i2c6-pins { > + pins { > + pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>, > + <PINMUX_GPIO67__FUNC_B1_SCL6>; > + bias-pull-up = <MTK_PULL_SET_RSEL_011>; > + drive-strength-microamp = <1000>; > + }; > + }; > + > + gpio_key_pins: gpio-key-pins { > + pins { > + pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>, > + <PINMUX_GPIO43__FUNC_B1_KPCOL1>, > + <PINMUX_GPIO44__FUNC_B1_KPROW0>; > + }; > + }; > + > + mmc0_default_pins: mmc0-default-pins { > + pins-clk { > + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins-cmd-dat { > + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, > + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, > + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, > + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, > + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, > + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, > + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, > + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, > + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins-rst { > + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + }; > + > + mmc0_uhs_pins: mmc0-uhs-pins { > + pins-clk { > + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins-cmd-dat { > + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, > + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, > + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, > + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, > + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, > + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, > + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, > + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, > + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins-ds { > + pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins-rst { > + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + }; > + > + mmc1_default_pins: mmc1-default-pins { > + pins-clk { > + pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins-cmd-dat { > + pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>, > + <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>, > + <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>, > + <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>, > + <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins-insert { > + pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>; > + bias-pull-up; > + }; > + }; > + > + mmc1_uhs_pins: mmc1-uhs-pins { > + pins-clk { > + pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins-cmd-dat { > + pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>, > + <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>, > + <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>, > + <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>, > + <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + }; > + > + mmc2_default_pins: mmc2-default-pins { > + pins-clk { > + pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins-cmd-dat { > + pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>, > + <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>, > + <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>, > + <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>, > + <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins-pcm { > + pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>; > + }; > + }; > + > + mmc2_uhs_pins: mmc2-uhs-pins { > + pins-clk { > + pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins-cmd-dat { > + pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>, > + <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>, > + <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>, > + <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>, > + <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + }; > + > + mmc2_eint_pins: mmc2-eint-pins { > + pins-dat1 { > + pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>; > + input-enable; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + }; > + > + mmc2_dat1_pins: mmc2-dat1-pins { > + pins-dat1 { > + pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + }; > + > + panel_default_pins: panel-default-pins { > + pins-dcdc { > + pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>; > + output-low; > + }; > + > + pins-en { > + pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>; > + output-low; > + }; > + > + pins-rst { > + pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>; > + output-high; > + }; > + }; > + > + rt1715_int_pins: rt1715-int-pins { > + pins_cmd0_dat { > + pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>; > + bias-pull-up; > + input-enable; > + }; > + }; > + > + spi0_pins: spi0-pins { > + pins-spi { > + pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>, > + <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>, > + <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>, > + <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>; > + bias-disable; > + }; > + }; > + > + spi1_pins: spi1-pins { > + pins-spi { > + pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>, > + <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>, > + <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>, > + <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>; > + bias-disable; > + }; > + }; > + > + spi2_pins: spi2-pins { > + pins-spi { > + pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>, > + <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>, > + <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>, > + <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>; > + bias-disable; > + }; > + }; > + > + touch_pins: touch-pins { > + pins-irq { > + pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>; > + input-enable; > + bias-disable; > + }; > + > + pins-reset { > + pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>; > + output-high; > + }; > + }; > + > + uart0_pins: uart0-pins { > + pins { > + pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>, > + <PINMUX_GPIO32__FUNC_I1_URXD0>; > + bias-pull-up; > + }; > + }; > + > + uart1_pins: uart1-pins { > + pins { > + pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>, > + <PINMUX_GPIO34__FUNC_I1_URXD1>; > + bias-pull-up; > + }; > + }; > + > + uart2_pins: uart2-pins { > + pins { > + pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>, > + <PINMUX_GPIO36__FUNC_I1_URXD2>; > + bias-pull-up; > + }; > + }; > + > + usb_default_pins: usb-default-pins { > + pins-iddig { > + pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>; > + input-enable; > + bias-pull-up; > + }; > + > + pins-valid { > + pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>; > + input-enable; > + }; > + > + pins-vbus { > + pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>; > + output-high; > + }; > + > + }; > + > + usb1_default_pins: usb1-default-pins { > + pins-valid { > + pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>; > + input-enable; > + }; > + > + pins-usb-hub-3v3-en { > + pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>; > + output-high; > + }; > + }; > + > + wifi_pwrseq_pins: wifi-pwrseq-pins { > + pins-wifi-enable { > + pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>; > + output-low; > + }; > + }; > +}; > + > +&pmic { > + interrupt-parent = <&pio>; > + interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; > +}; > + > +&scp { > + memory-region = <&scp_mem>; > + status = "okay"; > +}; > + > +&uart0 { > + pinctrl-0 = <&uart0_pins>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-0 = <&uart1_pins>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-0 = <&uart2_pins>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&spi2 { > + pinctrl-0 = <&spi2_pins>; > + pinctrl-names = "default"; > + mediatek,pad-select = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > +}; This should be moved to before the uarts and after the scp. > +&u3phy0 { > + status = "okay"; > +}; > + > +&u3phy1 { > + status = "okay"; > +}; > + > +&u3phy2 { > + status = "okay"; > +}; > + > +&xhci0 { > + status = "okay"; > + vusb33-supply = <&mt6359_vusb_ldo_reg>; > +}; > + > +&xhci1 { > + status = "okay"; > + vusb33-supply = <&mt6359_vusb_ldo_reg>; > + vbus-supply = <&usb_hub_reset_1v8>; > +}; > + > +&xhci2 { > + status = "okay"; > + vusb33-supply = <&mt6359_vusb_ldo_reg>; > +}; > -- > 2.18.0 > > ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-09-22 6:51 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2023-09-15 8:12 [PATCH v4 1/2] dt-bindings: arm64: mediatek: add mt8390-evk board Macpaul Lin 2023-09-15 8:12 ` [PATCH v4 2/2] arm64: dts: mediatek: add device-tree for Genio 700 EVK board Macpaul Lin 2023-09-22 6:50 ` Chen-Yu Tsai
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).