[PATCH] ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT

["Rafał Miłecki" <zajec5@gmail.com>]

From: Rafał Miłecki <rafal@milecki.pl>

Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing.
That syncs more Northstar code to be based on the same licensing schema.

This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X:
Make USB 3.0 PHY use MDIO PHY driver").

Cc: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
Vivek: can you send your Acked-by for this patch, please?
---
 arch/arm/boot/dts/broadcom/bcm-ns.dtsi   | 27 ++++++++++++++++++++++++
 arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 27 ------------------------
 2 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
index f0f3a718c413..d0d5f7e52a91 100644
--- a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
@@ -327,6 +327,29 @@ mdio: mdio@18003000 {
 		#address-cells = <1>;
 	};
 
+	mdio-mux@18003000 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x18003000 0x4>;
+		mux-mask = <0x200>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb3_phy: usb3-phy@10 {
+				compatible = "brcm,ns-ax-usb3-phy";
+				reg = <0x10>;
+				usb3-dmp-syscon = <&usb3_dmp>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
 	rng: rng@18004000 {
 		compatible = "brcm,bcm5301x-rng";
 		reg = <0x18004000 0x14>;
@@ -467,6 +490,10 @@ nand_controller: nand-controller@18028000 {
 		brcm,nand-has-wp;
 	};
 
+	usb3_dmp: syscon@18105000 {
+		reg = <0x18105000 0x1000>;
+	};
+
 	thermal-zones {
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <0>;
diff --git a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
index de46dbd5b876..f06a178a9240 100644
--- a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
@@ -62,33 +62,6 @@ periph_clk: periph_clk {
 		};
 	};
 
-	mdio-mux@18003000 {
-		compatible = "mdio-mux-mmioreg", "mdio-mux";
-		mdio-parent-bus = <&mdio>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x18003000 0x4>;
-		mux-mask = <0x200>;
-
-		mdio@0 {
-			reg = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			usb3_phy: usb3-phy@10 {
-				compatible = "brcm,ns-ax-usb3-phy";
-				reg = <0x10>;
-				usb3-dmp-syscon = <&usb3_dmp>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-	};
-
-	usb3_dmp: syscon@18105000 {
-		reg = <0x18105000 0x1000>;
-	};
-
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;
-- 
2.35.3