devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Abdel Alkuor <alkuor@gmail.com>
To: heikki.krogerus@linux.intel.com,
	krzysztof.kozlowski+dt@linaro.org, bryan.odonoghue@linaro.org
Cc: gregkh@linuxfoundation.org, robh+dt@kernel.org,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	conor+dt@kernel.org, linux-kernel@vger.kernel.org,
	abdelalkuor@geotab.com
Subject: [PATCH v5 09/15] USB: typec: Refactor tps6598x port registration
Date: Sun, 17 Sep 2023 11:26:33 -0400	[thread overview]
Message-ID: <20230917152639.21443-10-alkuor@gmail.com> (raw)
In-Reply-To: <20230917152639.21443-1-alkuor@gmail.com>

From: Abdel Alkuor <abdelalkuor@geotab.com>

tps6598x and cd321x use TPS_REG_SYSTEM_CONF to get dr/pr roles
where other similar devices don't have this register such as tps25750.

Move tps6598x port registration to its own function

Signed-off-by: Abdel Alkuor <abdelalkuor@geotab.com>
---
 drivers/usb/typec/tipd/core.c | 99 +++++++++++++++++++----------------
 1 file changed, 54 insertions(+), 45 deletions(-)

diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index 17b3bc480f97..8218d88a4a06 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -976,15 +976,65 @@ static int tps25750_apply_patch(struct tps6598x *tps)
 	return 0;
 };
 
+static int
+tps6598x_register_port(struct tps6598x *tps, struct fwnode_handle *fwnode)
+{
+	int ret;
+	u32 conf;
+	struct typec_capability typec_cap = { };
+
+	ret = tps6598x_read32(tps, TPS_REG_SYSTEM_CONF, &conf);
+	if (ret)
+		return ret;
+
+	typec_cap.revision = USB_TYPEC_REV_1_2;
+	typec_cap.pd_revision = 0x200;
+	typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+	typec_cap.driver_data = tps;
+	typec_cap.ops = &tps6598x_ops;
+	typec_cap.fwnode = fwnode;
+
+	switch (TPS_SYSCONF_PORTINFO(conf)) {
+	case TPS_PORTINFO_SINK_ACCESSORY:
+	case TPS_PORTINFO_SINK:
+		typec_cap.type = TYPEC_PORT_SNK;
+		typec_cap.data = TYPEC_PORT_UFP;
+		break;
+	case TPS_PORTINFO_DRP_UFP_DRD:
+	case TPS_PORTINFO_DRP_DFP_DRD:
+		typec_cap.type = TYPEC_PORT_DRP;
+		typec_cap.data = TYPEC_PORT_DRD;
+		break;
+	case TPS_PORTINFO_DRP_UFP:
+		typec_cap.type = TYPEC_PORT_DRP;
+		typec_cap.data = TYPEC_PORT_UFP;
+		break;
+	case TPS_PORTINFO_DRP_DFP:
+		typec_cap.type = TYPEC_PORT_DRP;
+		typec_cap.data = TYPEC_PORT_DFP;
+		break;
+	case TPS_PORTINFO_SOURCE:
+		typec_cap.type = TYPEC_PORT_SRC;
+		typec_cap.data = TYPEC_PORT_DFP;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	tps->port = typec_register_port(tps->dev, &typec_cap);
+	if (IS_ERR(tps->port))
+		return PTR_ERR(tps->port);
+
+	return 0;
+}
+
 static int tps6598x_probe(struct i2c_client *client)
 {
 	irq_handler_t irq_handler = tps6598x_interrupt;
 	struct device_node *np = client->dev.of_node;
-	struct typec_capability typec_cap = { };
 	struct tps6598x *tps;
 	struct fwnode_handle *fwnode;
 	u32 status;
-	u32 conf;
 	u32 vid;
 	int ret;
 	u64 mask1;
@@ -1053,10 +1103,6 @@ static int tps6598x_probe(struct i2c_client *client)
 		goto err_clear_mask;
 	trace_tps6598x_status(status);
 
-	ret = tps6598x_read32(tps, TPS_REG_SYSTEM_CONF, &conf);
-	if (ret < 0)
-		goto err_clear_mask;
-
 	/*
 	 * This fwnode has a "compatible" property, but is never populated as a
 	 * struct device. Instead we simply parse it to read the properties.
@@ -1074,50 +1120,13 @@ static int tps6598x_probe(struct i2c_client *client)
 		goto err_fwnode_put;
 	}
 
-	typec_cap.revision = USB_TYPEC_REV_1_2;
-	typec_cap.pd_revision = 0x200;
-	typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
-	typec_cap.driver_data = tps;
-	typec_cap.ops = &tps6598x_ops;
-	typec_cap.fwnode = fwnode;
-
-	switch (TPS_SYSCONF_PORTINFO(conf)) {
-	case TPS_PORTINFO_SINK_ACCESSORY:
-	case TPS_PORTINFO_SINK:
-		typec_cap.type = TYPEC_PORT_SNK;
-		typec_cap.data = TYPEC_PORT_UFP;
-		break;
-	case TPS_PORTINFO_DRP_UFP_DRD:
-	case TPS_PORTINFO_DRP_DFP_DRD:
-		typec_cap.type = TYPEC_PORT_DRP;
-		typec_cap.data = TYPEC_PORT_DRD;
-		break;
-	case TPS_PORTINFO_DRP_UFP:
-		typec_cap.type = TYPEC_PORT_DRP;
-		typec_cap.data = TYPEC_PORT_UFP;
-		break;
-	case TPS_PORTINFO_DRP_DFP:
-		typec_cap.type = TYPEC_PORT_DRP;
-		typec_cap.data = TYPEC_PORT_DFP;
-		break;
-	case TPS_PORTINFO_SOURCE:
-		typec_cap.type = TYPEC_PORT_SRC;
-		typec_cap.data = TYPEC_PORT_DFP;
-		break;
-	default:
-		ret = -ENODEV;
-		goto err_role_put;
-	}
-
 	ret = devm_tps6598_psy_register(tps);
 	if (ret)
 		goto err_role_put;
 
-	tps->port = typec_register_port(&client->dev, &typec_cap);
-	if (IS_ERR(tps->port)) {
-		ret = PTR_ERR(tps->port);
+	ret = tps6598x_register_port(tps, fwnode);
+	if (ret)
 		goto err_role_put;
-	}
 
 	if (status & TPS_STATUS_PLUG_PRESENT) {
 		ret = tps6598x_read16(tps, TPS_REG_POWER_STATUS, &tps->pwr_status);
-- 
2.34.1


  parent reply	other threads:[~2023-09-17 15:27 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-17 15:26 [PATCH v5 00/15] Add TPS25750 USB type-C PD controller support Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 01/15] dt-bindings: usb: tps6598x: Add tps25750 Abdel Alkuor
2023-09-17 17:30   ` Krzysztof Kozlowski
2023-09-17 19:30     ` Abdel Alkuo
2023-09-17 15:26 ` [PATCH v5 02/15] USB: typec: Add cmd timeout and response delay Abdel Alkuor
2023-09-18 10:44   ` Heikki Krogerus
2023-09-20 14:29     ` Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 03/15] USB: typec: Add patch mode to tps6598x Abdel Alkuor
2023-09-18 11:07   ` Heikki Krogerus
2023-09-20 14:42     ` Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 04/15] USB: typec: Load TPS25750 patch bundle Abdel Alkuor
2023-09-17 17:04   ` kernel test robot
2023-09-17 17:24   ` kernel test robot
2023-09-18 11:31   ` Heikki Krogerus
2023-09-20 14:46     ` Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 05/15] USB: typec: Check for EEPROM present Abdel Alkuor
2023-09-18 12:45   ` Heikki Krogerus
2023-09-20 14:47     ` Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 06/15] USB: typec: Clear dead battery flag Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 07/15] USB: typec: Apply patch again after power resume Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 08/15] USB: typec: Add interrupt support for TPS25750 Abdel Alkuor
2023-09-18 12:46   ` Heikki Krogerus
2023-09-20 14:50     ` Abdel Alkuor
2023-09-17 15:26 ` Abdel Alkuor [this message]
2023-09-17 15:26 ` [PATCH v5 10/15] USB: typec: Add port registration for tps25750 Abdel Alkuor
2023-09-18 12:58   ` Heikki Krogerus
2023-09-20 14:53     ` Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 11/15] USB: typec: Enable sleep mode " Abdel Alkuor
2023-09-17 17:32   ` Krzysztof Kozlowski
2023-09-17 15:26 ` [PATCH v5 12/15] USB: typec: Add trace for tps25750 irq Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 13/15] USB: typec: Add power status trace for tps25750 Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 14/15] USB: typec: Add " Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 15/15] USB: typec: Do not check VID " Abdel Alkuor
2023-09-18 13:29   ` Heikki Krogerus
2023-09-20 15:10     ` Abdel Alkuor
2023-09-18 13:57 ` [PATCH v5 00/15] Add TPS25750 USB type-C PD controller support Heikki Krogerus
2023-09-20 15:21   ` Abdel Alkuor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230917152639.21443-10-alkuor@gmail.com \
    --to=alkuor@gmail.com \
    --cc=abdelalkuor@geotab.com \
    --cc=bryan.odonoghue@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).