[PATCH] ARM: dts: stm32: Fix ethernet pins used on phyCORE-STM32MP15

[PATCH] ARM: dts: stm32: Fix ethernet pins used on phyCORE-STM32MP15

[Sascha Hauer]

On the phyCORE-STM32MP15 the 125MHz clock for the ethernet phy must
be provided on the ETH_RGMII_GTX_CLK. ETH_RGMII_CLK125 is unused though,
so remove the latter pin and add the former.

ethernet0_rgmii_pins_d and ethernet0_rgmii_sleep_pins_d are used by the
phyCORE-STM32MP15 board only, so we can do this change in the generic
pinctrl file without breaking other boards.

Fixes: 303f3fe1d88f ("ARM: dts: stm32: Add alternate pinmux for ethernet for stm32mp15")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
index 098153ee99a3a..5d85bcc8b3a8c 100644
--- a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
@@ -354,7 +354,7 @@ pins1 {
 
 	ethernet0_rgmii_pins_d: rgmii-3 {
 		pins1 {
-			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+			pinmux = <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
 				 <STM32_PINMUX('G', 13, AF11)>,	/* ETH_RGMII_TXD0 */
 				 <STM32_PINMUX('G', 14, AF11)>,	/* ETH_RGMII_TXD1 */
 				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
@@ -384,8 +384,7 @@ pins3 {
 
 	ethernet0_rgmii_sleep_pins_d: rgmii-sleep-3 {
 		pins1 {
-			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
-				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+			pinmux = <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
 				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
 				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
 				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
-- 
2.39.2