* [PATCH 1/7] dt-bindings: net: add STM32MP13 compatible in documentation for stm32
2023-09-21 15:06 [PATCH 0/7] Series to deliver Ethernets for STM32MP13 Christophe Roullier
@ 2023-09-21 15:06 ` Christophe Roullier
2023-09-22 11:43 ` Conor Dooley
2023-09-21 15:06 ` [PATCH 2/7] net: ethernet: stmmac: rework glue to simplify management for next stm32 Christophe Roullier
` (5 subsequent siblings)
6 siblings, 1 reply; 10+ messages in thread
From: Christophe Roullier @ 2023-09-21 15:06 UTC (permalink / raw)
To: David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Richard Cochran, Jose Abreu, Liam Girdwood,
Mark Brown, Christophe Roullier
Cc: netdev, devicetree, linux-stm32, linux-arm-kernel, linux-kernel
New STM32 SOC have 2 GMACs instances.
GMAC IP version is SNPS 4.20.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
.../devicetree/bindings/net/stm32-dwmac.yaml | 140 +++++++++++++++---
1 file changed, 118 insertions(+), 22 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index fc8c96b08d7d..75836916c38c 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -22,15 +22,17 @@ select:
enum:
- st,stm32-dwmac
- st,stm32mp1-dwmac
+ - st,stm32mp13-dwmac
required:
- compatible
-allOf:
- - $ref: snps,dwmac.yaml#
-
properties:
compatible:
oneOf:
+ - items:
+ - enum:
+ - st,stm32mp13-dwmac
+ - const: snps,dwmac-4.20a
- items:
- enum:
- st,stm32mp1-dwmac
@@ -72,27 +74,69 @@ properties:
- eth-ck
- ptp_ref
- st,syscon:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- items:
- - items:
- - description: phandle to the syscon node which encompases the glue register
- - description: offset of the control register
+ phy-supply:
+ description: PHY regulator
+
+ st,ext-phyclk:
description:
- Should be phandle/offset pair. The phandle to the syscon node which
- encompases the glue register, and the offset of the control register
+ set this property in RMII mode when you have PHY without crystal 50MHz and want to
+ select RCC clock instead of ETH_REF_CLK. or in RGMII mode when you want to select
+ RCC clock instead of ETH_CLK125.
+ type: boolean
st,eth-clk-sel:
+ deprecated: true
description:
set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
type: boolean
st,eth-ref-clk-sel:
+ deprecated: true
description:
set this property in RMII mode when you have PHY without crystal 50MHz and want to
select RCC clock instead of ETH_REF_CLK.
type: boolean
+allOf:
+ - $ref: snps,dwmac.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32mp1-dwmac
+ - st,stm32-dwmac
+ then:
+ properties:
+ st,syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to the syscon node which encompases the glue register
+ - description: offset of the control register
+ description:
+ Should be phandle/offset pair. The phandle to the syscon node which
+ encompases the glue register, and the offset of the control register
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32mp13-dwmac
+ then:
+ properties:
+ st,syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to the syscon node which encompases the glue register
+ - description: offset of the control register
+ - description: field to set mask in register
+ description:
+ Should be phandle/offset pair. The phandle to the syscon node which
+ encompases the glue register, the offset of the control register and
+ the mask to set bitfield in control register
+
required:
- compatible
- clocks
@@ -112,24 +156,36 @@ examples:
compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
reg = <0x5800a000 0x2000>;
reg-names = "stmmaceth";
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
+ interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq",
+ "eth_wake_irq";
clock-names = "stmmaceth",
- "mac-clk-tx",
- "mac-clk-rx",
- "ethstp",
- "eth-ck";
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "eth-ck",
+ "ptp_ref",
+ "ethstp";
clocks = <&rcc ETHMAC>,
- <&rcc ETHTX>,
- <&rcc ETHRX>,
- <&rcc ETHSTP>,
- <&rcc ETHCK_K>;
+ <&rcc ETHTX>,
+ <&rcc ETHRX>,
+ <&rcc ETHCK_K>,
+ <&rcc ETHPTP_K>,
+ <&rcc ETHSTP>;
st,syscon = <&syscfg 0x4>;
+ snps,mixed-burst;
snps,pbl = <2>;
+ snps,en-tx-lpi-clockgating;
snps,axi-config = <&stmmac_axi_config_0>;
snps,tso;
phy-mode = "rgmii";
- };
+
+ stmmac_axi_config_0: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+ };
- |
//Example 2 (MCU example)
@@ -161,3 +217,43 @@ examples:
snps,pbl = <8>;
phy-mode = "mii";
};
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ #include <dt-bindings/mfd/stm32h7-rcc.h>
+ //Example 4
+ ethernet3: ethernet@5800a000 {
+ compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800a000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq",
+ "eth_wake_irq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "eth-ck",
+ "ptp_ref",
+ "ethstp";
+ clocks = <&rcc ETHMAC>,
+ <&rcc ETHTX>,
+ <&rcc ETHRX>,
+ <&rcc ETHCK_K>,
+ <&rcc ETHPTP_K>,
+ <&rcc ETHSTP>;
+ st,syscon = <&syscfg 0x4 0xff0000>;
+ snps,mixed-burst;
+ snps,pbl = <2>;
+ snps,axi-config = <&stmmac_axi_config_1>;
+ snps,tso;
+ phy-mode = "rmii";
+
+ stmmac_axi_config_1: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 1/7] dt-bindings: net: add STM32MP13 compatible in documentation for stm32
2023-09-21 15:06 ` [PATCH 1/7] dt-bindings: net: add STM32MP13 compatible in documentation for stm32 Christophe Roullier
@ 2023-09-22 11:43 ` Conor Dooley
0 siblings, 0 replies; 10+ messages in thread
From: Conor Dooley @ 2023-09-22 11:43 UTC (permalink / raw)
To: Christophe Roullier
Cc: David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Richard Cochran, Jose Abreu, Liam Girdwood,
Mark Brown, netdev, devicetree, linux-stm32, linux-arm-kernel,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 8438 bytes --]
Yo,
On Thu, Sep 21, 2023 at 05:06:16PM +0200, Christophe Roullier wrote:
> New STM32 SOC have 2 GMACs instances.
> GMAC IP version is SNPS 4.20.
>
> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
> ---
> .../devicetree/bindings/net/stm32-dwmac.yaml | 140 +++++++++++++++---
> 1 file changed, 118 insertions(+), 22 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> index fc8c96b08d7d..75836916c38c 100644
> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> @@ -22,15 +22,17 @@ select:
> enum:
> - st,stm32-dwmac
> - st,stm32mp1-dwmac
> + - st,stm32mp13-dwmac
> required:
> - compatible
>
> -allOf:
> - - $ref: snps,dwmac.yaml#
> -
> properties:
> compatible:
> oneOf:
> + - items:
> + - enum:
> + - st,stm32mp13-dwmac
> + - const: snps,dwmac-4.20a
The enum just below this is also for the 4.20a, no? Why not just put
this mp13 compatible into that enum?
> - items:
> - enum:
> - st,stm32mp1-dwmac
> @@ -72,27 +74,69 @@ properties:
> - eth-ck
> - ptp_ref
>
> - st,syscon:
Please try to avoid defining properties inside if/then/else sections and
only move the variable bits if possible.
> - $ref: /schemas/types.yaml#/definitions/phandle-array
> - items:
> - - items:
> - - description: phandle to the syscon node which encompases the glue register
> - - description: offset of the control register
> + phy-supply:
> + description: PHY regulator
> +
> + st,ext-phyclk:
> description:
> - Should be phandle/offset pair. The phandle to the syscon node which
> - encompases the glue register, and the offset of the control register
> + set this property in RMII mode when you have PHY without crystal 50MHz and want to
> + select RCC clock instead of ETH_REF_CLK. or in RGMII mode when you want to select
> + RCC clock instead of ETH_CLK125.
> + type: boolean
>
> st,eth-clk-sel:
> + deprecated: true
Why have these been marked as deprecated? That doesn't appear to be
mention in the commit message & sounds like it should be a different
commit.
> description:
> set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
> type: boolean
>
> st,eth-ref-clk-sel:
> + deprecated: true
Ditto.
> description:
> set this property in RMII mode when you have PHY without crystal 50MHz and want to
> select RCC clock instead of ETH_REF_CLK.
> type: boolean
>
> +allOf:
> + - $ref: snps,dwmac.yaml#
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - st,stm32mp1-dwmac
> + - st,stm32-dwmac
> + then:
> + properties:
> + st,syscon:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - items:
> + - description: phandle to the syscon node which encompases the glue register
> + - description: offset of the control register
> + description:
> + Should be phandle/offset pair. The phandle to the syscon node which
> + encompases the glue register, and the offset of the control register
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - st,stm32mp13-dwmac
You've got 2 if/then sections containing tests for 3 compatibles. There
are only 2 compatibles total right now & 3 with the patch, so it looks
like you'd get away with if/then/else instead.
> + then:
> + properties:
> + st,syscon:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - items:
> + - description: phandle to the syscon node which encompases the glue register
> + - description: offset of the control register
> + - description: field to set mask in register
> + description:
> + Should be phandle/offset pair. The phandle to the syscon node which
> + encompases the glue register, the offset of the control register and
> + the mask to set bitfield in control register
> +
> required:
> - compatible
> - clocks
> @@ -112,24 +156,36 @@ examples:
> compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
I don't understand why this existing example is changing.
Thanks,
Conor.
> reg = <0x5800a000 0x2000>;
> reg-names = "stmmaceth";
> - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "macirq";
> + interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
> + <&exti 70 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq",
> + "eth_wake_irq";
> clock-names = "stmmaceth",
> - "mac-clk-tx",
> - "mac-clk-rx",
> - "ethstp",
> - "eth-ck";
> + "mac-clk-tx",
> + "mac-clk-rx",
> + "eth-ck",
> + "ptp_ref",
> + "ethstp";
> clocks = <&rcc ETHMAC>,
> - <&rcc ETHTX>,
> - <&rcc ETHRX>,
> - <&rcc ETHSTP>,
> - <&rcc ETHCK_K>;
> + <&rcc ETHTX>,
> + <&rcc ETHRX>,
> + <&rcc ETHCK_K>,
> + <&rcc ETHPTP_K>,
> + <&rcc ETHSTP>;
> st,syscon = <&syscfg 0x4>;
> + snps,mixed-burst;
> snps,pbl = <2>;
> + snps,en-tx-lpi-clockgating;
> snps,axi-config = <&stmmac_axi_config_0>;
> snps,tso;
> phy-mode = "rgmii";
> - };
> +
> + stmmac_axi_config_0: stmmac-axi-config {
> + snps,wr_osr_lmt = <0x7>;
> + snps,rd_osr_lmt = <0x7>;
> + snps,blen = <0 0 0 0 16 8 4>;
> + };
> + };
>
> - |
> //Example 2 (MCU example)
> @@ -161,3 +217,43 @@ examples:
> snps,pbl = <8>;
> phy-mode = "mii";
> };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/stm32mp1-clks.h>
> + #include <dt-bindings/reset/stm32mp1-resets.h>
> + #include <dt-bindings/mfd/stm32h7-rcc.h>
> + //Example 4
> + ethernet3: ethernet@5800a000 {
> + compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
> + reg = <0x5800a000 0x2000>;
> + reg-names = "stmmaceth";
> + interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
> + <&exti 68 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq",
> + "eth_wake_irq";
> + clock-names = "stmmaceth",
> + "mac-clk-tx",
> + "mac-clk-rx",
> + "eth-ck",
> + "ptp_ref",
> + "ethstp";
> + clocks = <&rcc ETHMAC>,
> + <&rcc ETHTX>,
> + <&rcc ETHRX>,
> + <&rcc ETHCK_K>,
> + <&rcc ETHPTP_K>,
> + <&rcc ETHSTP>;
> + st,syscon = <&syscfg 0x4 0xff0000>;
> + snps,mixed-burst;
> + snps,pbl = <2>;
> + snps,axi-config = <&stmmac_axi_config_1>;
> + snps,tso;
> + phy-mode = "rmii";
> +
> + stmmac_axi_config_1: stmmac-axi-config {
> + snps,wr_osr_lmt = <0x7>;
> + snps,rd_osr_lmt = <0x7>;
> + snps,blen = <0 0 0 0 16 8 4>;
> + };
> + };
> --
> 2.25.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/7] net: ethernet: stmmac: rework glue to simplify management for next stm32
2023-09-21 15:06 [PATCH 0/7] Series to deliver Ethernets for STM32MP13 Christophe Roullier
2023-09-21 15:06 ` [PATCH 1/7] dt-bindings: net: add STM32MP13 compatible in documentation for stm32 Christophe Roullier
@ 2023-09-21 15:06 ` Christophe Roullier
2023-09-21 16:22 ` Andrew Lunn
2023-09-21 15:06 ` [PATCH 3/7] net: ethernet: stmmac: add management of stm32mp13 for stm32 Christophe Roullier
` (4 subsequent siblings)
6 siblings, 1 reply; 10+ messages in thread
From: Christophe Roullier @ 2023-09-21 15:06 UTC (permalink / raw)
To: David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Richard Cochran, Jose Abreu, Liam Girdwood,
Mark Brown, Christophe Roullier
Cc: netdev, devicetree, linux-stm32, linux-arm-kernel, linux-kernel
Change glue to be more generic and manage easily next stm32 products.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 205 ++++++++++++------
1 file changed, 139 insertions(+), 66 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index ab4324ed46da..762c5256398f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -14,6 +14,7 @@
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include <linux/pm_wakeirq.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -23,10 +24,6 @@
#define SYSCFG_MCU_ETH_MASK BIT(23)
#define SYSCFG_MP1_ETH_MASK GENMASK(23, 16)
-#define SYSCFG_PMCCLRR_OFFSET 0x40
-
-#define SYSCFG_PMCR_ETH_CLK_SEL BIT(16)
-#define SYSCFG_PMCR_ETH_REF_CLK_SEL BIT(17)
/* CLOCK feed to PHY*/
#define ETH_CK_F_25M 25000000
@@ -46,9 +43,6 @@
* RMII | 1 | 0 | 0 | n/a |
*------------------------------------------
*/
-#define SYSCFG_PMCR_ETH_SEL_MII BIT(20)
-#define SYSCFG_PMCR_ETH_SEL_RGMII BIT(21)
-#define SYSCFG_PMCR_ETH_SEL_RMII BIT(23)
#define SYSCFG_PMCR_ETH_SEL_GMII 0
#define SYSCFG_MCU_ETH_SEL_MII 0
#define SYSCFG_MCU_ETH_SEL_RMII 1
@@ -62,17 +56,17 @@
*| | | 25MHz | 50MHz | |
* ---------------------------------------------------------------------------
*| MII | - | eth-ck | n/a | n/a |
- *| | | st,ext-phyclk | | |
+ *| | | | | |
* ---------------------------------------------------------------------------
*| GMII | - | eth-ck | n/a | n/a |
- *| | | st,ext-phyclk | | |
+ *| | | | | |
* ---------------------------------------------------------------------------
*| RGMII | - | eth-ck | n/a | eth-ck |
- *| | | st,ext-phyclk | | st,eth-clk-sel or|
+ *| | | | | st,eth-clk-sel or|
*| | | | | st,ext-phyclk |
* ---------------------------------------------------------------------------
*| RMII | - | eth-ck | eth-ck | n/a |
- *| | | st,ext-phyclk | st,eth-ref-clk-sel | |
+ *| | | | st,eth-ref-clk-sel | |
*| | | | or st,ext-phyclk | |
* ---------------------------------------------------------------------------
*
@@ -88,14 +82,27 @@ struct stm32_dwmac {
int enable_eth_ck;
int eth_clk_sel_reg;
int eth_ref_clk_sel_reg;
- int irq_pwr_wakeup;
u32 mode_reg; /* MAC glue-logic mode register */
+ u32 mode_mask;
struct regmap *regmap;
+ struct regulator *regulator;
u32 speed;
const struct stm32_ops *ops;
struct device *dev;
};
+struct stm32_syscfg_pmcsetr {
+ u32 eth1_clk_sel;
+ u32 eth1_ref_clk_sel;
+ u32 eth1_selmii;
+ u32 eth1_sel_rgmii;
+ u32 eth1_sel_rmii;
+ u32 eth2_clk_sel;
+ u32 eth2_ref_clk_sel;
+ u32 eth2_sel_rgmii;
+ u32 eth2_sel_rmii;
+};
+
struct stm32_ops {
int (*set_mode)(struct plat_stmmacenet_data *plat_dat);
int (*clk_prepare)(struct stm32_dwmac *dwmac, bool prepare);
@@ -103,7 +110,8 @@ struct stm32_ops {
void (*resume)(struct stm32_dwmac *dwmac);
int (*parse_data)(struct stm32_dwmac *dwmac,
struct device *dev);
- u32 syscfg_eth_mask;
+ u32 syscfg_clr_off;
+ struct stm32_syscfg_pmcsetr pmcsetr;
};
static int stm32_dwmac_init(struct plat_stmmacenet_data *plat_dat)
@@ -173,26 +181,26 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
dwmac->enable_eth_ck = false;
switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_MII:
- if (clk_rate == ETH_CK_F_25M && dwmac->ext_phyclk)
+ if (clk_rate == ETH_CK_F_25M)
dwmac->enable_eth_ck = true;
- val = SYSCFG_PMCR_ETH_SEL_MII;
+ val = dwmac->ops->pmcsetr.eth1_selmii;
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
break;
case PHY_INTERFACE_MODE_GMII:
val = SYSCFG_PMCR_ETH_SEL_GMII;
- if (clk_rate == ETH_CK_F_25M &&
- (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
+ if (clk_rate == ETH_CK_F_25M)
dwmac->enable_eth_ck = true;
- val |= SYSCFG_PMCR_ETH_CLK_SEL;
- }
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_GMII\n");
break;
case PHY_INTERFACE_MODE_RMII:
- val = SYSCFG_PMCR_ETH_SEL_RMII;
- if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_50M) &&
+ val = dwmac->ops->pmcsetr.eth1_sel_rmii | dwmac->ops->pmcsetr.eth2_sel_rmii;
+ if (clk_rate == ETH_CK_F_25M)
+ dwmac->enable_eth_ck = true;
+ if ((clk_rate == ETH_CK_F_50M) &&
(dwmac->eth_ref_clk_sel_reg || dwmac->ext_phyclk)) {
dwmac->enable_eth_ck = true;
- val |= SYSCFG_PMCR_ETH_REF_CLK_SEL;
+ val |= dwmac->ops->pmcsetr.eth1_ref_clk_sel;
+ val |= dwmac->ops->pmcsetr.eth2_ref_clk_sel;
}
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RMII\n");
break;
@@ -200,11 +208,14 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
- val = SYSCFG_PMCR_ETH_SEL_RGMII;
- if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_125M) &&
+ val = dwmac->ops->pmcsetr.eth1_sel_rgmii | dwmac->ops->pmcsetr.eth2_sel_rgmii;
+ if (clk_rate == ETH_CK_F_25M)
+ dwmac->enable_eth_ck = true;
+ if ((clk_rate == ETH_CK_F_125M) &&
(dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
dwmac->enable_eth_ck = true;
- val |= SYSCFG_PMCR_ETH_CLK_SEL;
+ val |= dwmac->ops->pmcsetr.eth1_clk_sel;
+ val |= dwmac->ops->pmcsetr.eth2_clk_sel;
}
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RGMII\n");
break;
@@ -216,12 +227,12 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
}
/* Need to update PMCCLRR (clear register) */
- regmap_write(dwmac->regmap, reg + SYSCFG_PMCCLRR_OFFSET,
- dwmac->ops->syscfg_eth_mask);
+ regmap_write(dwmac->regmap, dwmac->ops->syscfg_clr_off,
+ dwmac->mode_mask);
/* Update PMCSETR (set register) */
return regmap_update_bits(dwmac->regmap, reg,
- dwmac->ops->syscfg_eth_mask, val);
+ dwmac->mode_mask, val);
}
static int stm32mcu_set_mode(struct plat_stmmacenet_data *plat_dat)
@@ -247,7 +258,7 @@ static int stm32mcu_set_mode(struct plat_stmmacenet_data *plat_dat)
}
return regmap_update_bits(dwmac->regmap, reg,
- dwmac->ops->syscfg_eth_mask, val << 23);
+ SYSCFG_MCU_ETH_MASK, val << 23);
}
static void stm32_dwmac_clk_disable(struct stm32_dwmac *dwmac)
@@ -290,18 +301,33 @@ static int stm32_dwmac_parse_data(struct stm32_dwmac *dwmac,
return PTR_ERR(dwmac->regmap);
err = of_property_read_u32_index(np, "st,syscon", 1, &dwmac->mode_reg);
+ if (err) {
+ dev_err(dev, "Can't get sysconfig register offset (%d)\n", err);
+ return err;
+ }
+
+ dwmac->mode_mask = SYSCFG_MP1_ETH_MASK;
+ err = of_property_read_u32_index(np, "st,syscon", 2, &dwmac->mode_mask);
if (err)
- dev_err(dev, "Can't get sysconfig mode offset (%d)\n", err);
+ pr_debug("Warning sysconfig register mask not set\n");
- return err;
+ dwmac->regulator = devm_regulator_get_optional(dev, "phy");
+ if (IS_ERR(dwmac->regulator)) {
+ if (PTR_ERR(dwmac->regulator) == -EPROBE_DEFER) {
+ dev_dbg(dev, "phy regulator is not available yet, deferred probing\n");
+ return -EPROBE_DEFER;
+ }
+ dev_dbg(dev, "no regulator found\n");
+ dwmac->regulator = NULL;
+ }
+
+ return 0;
}
static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
struct device_node *np = dev->of_node;
- int err = 0;
/* Ethernet PHY have no crystal */
dwmac->ext_phyclk = of_property_read_bool(np, "st,ext-phyclk");
@@ -316,7 +342,7 @@ static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
/* Get ETH_CLK clocks */
dwmac->clk_eth_ck = devm_clk_get(dev, "eth-ck");
if (IS_ERR(dwmac->clk_eth_ck)) {
- dev_info(dev, "No phy clock provided...\n");
+ dev_dbg(dev, "No phy clock provided...\n");
dwmac->clk_eth_ck = NULL;
}
@@ -333,29 +359,45 @@ static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
if (IS_ERR(dwmac->syscfg_clk))
dwmac->syscfg_clk = NULL;
- /* Get IRQ information early to have an ability to ask for deferred
- * probe if needed before we went too far with resource allocation.
- */
- dwmac->irq_pwr_wakeup = platform_get_irq_byname_optional(pdev,
- "stm32_pwr_wakeup");
- if (dwmac->irq_pwr_wakeup == -EPROBE_DEFER)
- return -EPROBE_DEFER;
-
- if (!dwmac->clk_eth_ck && dwmac->irq_pwr_wakeup >= 0) {
- err = device_init_wakeup(&pdev->dev, true);
- if (err) {
- dev_err(&pdev->dev, "Failed to init wake up irq\n");
- return err;
- }
- err = dev_pm_set_dedicated_wake_irq(&pdev->dev,
- dwmac->irq_pwr_wakeup);
- if (err) {
- dev_err(&pdev->dev, "Failed to set wake up irq\n");
- device_init_wakeup(&pdev->dev, false);
- }
- device_set_wakeup_enable(&pdev->dev, false);
+ return 0;
+}
+
+static int stm32_dwmac_wake_init(struct device *dev,
+ struct stmmac_resources *stmmac_res)
+{
+ int err;
+
+ device_set_wakeup_capable(dev, true);
+
+ err = dev_pm_set_wake_irq(dev, stmmac_res->wol_irq);
+ if (err) {
+ dev_err(dev, "Failed to set wake up irq\n");
+ device_set_wakeup_capable(dev, false);
+ return err;
+ }
+
+ return 0;
+}
+
+static int phy_power_on(struct stm32_dwmac *bsp_priv, bool enable)
+{
+ int ret;
+ struct device *dev = bsp_priv->dev;
+
+ if (!bsp_priv->regulator)
+ return 0;
+
+ if (enable) {
+ ret = regulator_enable(bsp_priv->regulator);
+ if (ret)
+ dev_err(dev, "fail to enable phy-supply\n");
+ } else {
+ ret = regulator_disable(bsp_priv->regulator);
+ if (ret)
+ dev_err(dev, "fail to disable phy-supply\n");
}
- return err;
+
+ return 0;
}
static int stm32_dwmac_probe(struct platform_device *pdev)
@@ -393,21 +435,37 @@ static int stm32_dwmac_probe(struct platform_device *pdev)
return ret;
}
+ if (stmmac_res.wol_irq && !dwmac->clk_eth_ck) {
+ ret = stm32_dwmac_wake_init(&pdev->dev, &stmmac_res);
+ if (ret)
+ goto err_wake_init_disable;
+ }
+
plat_dat->bsp_priv = dwmac;
ret = stm32_dwmac_init(plat_dat);
if (ret)
- return ret;
+ goto err_wake_init_disable;
- ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+ ret = phy_power_on(plat_dat->bsp_priv, true);
if (ret)
goto err_clk_disable;
+ ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+ if (ret)
+ goto err_gmac_powerdown;
+
return 0;
+err_gmac_powerdown:
+ phy_power_on(plat_dat->bsp_priv, false);
err_clk_disable:
stm32_dwmac_clk_disable(dwmac);
-
+err_wake_init_disable:
+ if (stmmac_res.wol_irq && !dwmac->clk_eth_ck) {
+ dev_pm_clear_wake_irq(&pdev->dev);
+ device_set_wakeup_capable(&pdev->dev, false);
+ }
return ret;
}
@@ -415,16 +473,13 @@ static void stm32_dwmac_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct stmmac_priv *priv = netdev_priv(ndev);
- struct stm32_dwmac *dwmac = priv->plat->bsp_priv;
stmmac_dvr_remove(&pdev->dev);
stm32_dwmac_clk_disable(priv->plat->bsp_priv);
- if (dwmac->irq_pwr_wakeup >= 0) {
- dev_pm_clear_wake_irq(&pdev->dev);
- device_init_wakeup(&pdev->dev, false);
- }
+ dev_pm_clear_wake_irq(&pdev->dev);
+ device_init_wakeup(&pdev->dev, false);
}
static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
@@ -440,12 +495,20 @@ static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
if (dwmac->enable_eth_ck)
clk_disable_unprepare(dwmac->clk_eth_ck);
+ /* Keep the PHY up if we use Wake-on-Lan. */
+ if (!device_may_wakeup(dwmac->dev))
+ phy_power_on(dwmac, false);
+
return ret;
}
static void stm32mp1_resume(struct stm32_dwmac *dwmac)
{
clk_disable_unprepare(dwmac->clk_ethstp);
+
+ /* The PHY was up for Wake-on-Lan. */
+ if (!device_may_wakeup(dwmac->dev))
+ phy_power_on(dwmac, true);
}
static int stm32mcu_suspend(struct stm32_dwmac *dwmac)
@@ -499,7 +562,6 @@ static SIMPLE_DEV_PM_OPS(stm32_dwmac_pm_ops,
static struct stm32_ops stm32mcu_dwmac_data = {
.set_mode = stm32mcu_set_mode,
.suspend = stm32mcu_suspend,
- .syscfg_eth_mask = SYSCFG_MCU_ETH_MASK
};
static struct stm32_ops stm32mp1_dwmac_data = {
@@ -508,7 +570,18 @@ static struct stm32_ops stm32mp1_dwmac_data = {
.suspend = stm32mp1_suspend,
.resume = stm32mp1_resume,
.parse_data = stm32mp1_parse_data,
- .syscfg_eth_mask = SYSCFG_MP1_ETH_MASK
+ .syscfg_clr_off = 0x44,
+ .pmcsetr = {
+ .eth1_clk_sel = BIT(16),
+ .eth1_ref_clk_sel = BIT(17),
+ .eth1_selmii = BIT(20),
+ .eth1_sel_rgmii = BIT(21),
+ .eth1_sel_rmii = BIT(23),
+ .eth2_clk_sel = 0,
+ .eth2_ref_clk_sel = 0,
+ .eth2_sel_rgmii = 0,
+ .eth2_sel_rmii = 0
+ }
};
static const struct of_device_id stm32_dwmac_match[] = {
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 2/7] net: ethernet: stmmac: rework glue to simplify management for next stm32
2023-09-21 15:06 ` [PATCH 2/7] net: ethernet: stmmac: rework glue to simplify management for next stm32 Christophe Roullier
@ 2023-09-21 16:22 ` Andrew Lunn
0 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2023-09-21 16:22 UTC (permalink / raw)
To: Christophe Roullier
Cc: David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Richard Cochran, Jose Abreu, Liam Girdwood,
Mark Brown, netdev, devicetree, linux-stm32, linux-arm-kernel,
linux-kernel
On Thu, Sep 21, 2023 at 05:06:17PM +0200, Christophe Roullier wrote:
> Change glue to be more generic and manage easily next stm32 products.
Please could you break this up into a number of smaller patches, each
with a good commit message about what they do, and why.
Thanks
Andrew
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 3/7] net: ethernet: stmmac: add management of stm32mp13 for stm32
2023-09-21 15:06 [PATCH 0/7] Series to deliver Ethernets for STM32MP13 Christophe Roullier
2023-09-21 15:06 ` [PATCH 1/7] dt-bindings: net: add STM32MP13 compatible in documentation for stm32 Christophe Roullier
2023-09-21 15:06 ` [PATCH 2/7] net: ethernet: stmmac: rework glue to simplify management for next stm32 Christophe Roullier
@ 2023-09-21 15:06 ` Christophe Roullier
2023-09-21 15:06 ` [PATCH 4/7] ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13 Christophe Roullier
` (3 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Christophe Roullier @ 2023-09-21 15:06 UTC (permalink / raw)
To: David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Richard Cochran, Jose Abreu, Liam Girdwood,
Mark Brown, Christophe Roullier
Cc: netdev, devicetree, linux-stm32, linux-arm-kernel, linux-kernel
Add Ethernet support for STM32MP13.
STM32MP13 is STM32 SOC with 2 GMACs instances.
GMAC IP version is SNPS 4.20.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index 762c5256398f..0f843ab3822f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -584,9 +584,30 @@ static struct stm32_ops stm32mp1_dwmac_data = {
}
};
+static struct stm32_ops stm32mp13_dwmac_data = {
+ .set_mode = stm32mp1_set_mode,
+ .clk_prepare = stm32mp1_clk_prepare,
+ .suspend = stm32mp1_suspend,
+ .resume = stm32mp1_resume,
+ .parse_data = stm32mp1_parse_data,
+ .syscfg_clr_off = 0x08,
+ .pmcsetr = {
+ .eth1_clk_sel = BIT(16),
+ .eth1_ref_clk_sel = BIT(17),
+ .eth1_selmii = 0,
+ .eth1_sel_rgmii = BIT(21),
+ .eth1_sel_rmii = BIT(23),
+ .eth2_clk_sel = BIT(24),
+ .eth2_ref_clk_sel = BIT(25),
+ .eth2_sel_rgmii = BIT(29),
+ .eth2_sel_rmii = BIT(31)
+ }
+};
+
static const struct of_device_id stm32_dwmac_match[] = {
{ .compatible = "st,stm32-dwmac", .data = &stm32mcu_dwmac_data},
{ .compatible = "st,stm32mp1-dwmac", .data = &stm32mp1_dwmac_data},
+ { .compatible = "st,stm32mp13-dwmac", .data = &stm32mp13_dwmac_data},
{ }
};
MODULE_DEVICE_TABLE(of, stm32_dwmac_match);
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 4/7] ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
2023-09-21 15:06 [PATCH 0/7] Series to deliver Ethernets for STM32MP13 Christophe Roullier
` (2 preceding siblings ...)
2023-09-21 15:06 ` [PATCH 3/7] net: ethernet: stmmac: add management of stm32mp13 for stm32 Christophe Roullier
@ 2023-09-21 15:06 ` Christophe Roullier
2023-09-21 15:06 ` [PATCH 5/7] ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board Christophe Roullier
` (2 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Christophe Roullier @ 2023-09-21 15:06 UTC (permalink / raw)
To: David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Richard Cochran, Jose Abreu, Liam Girdwood,
Mark Brown, Christophe Roullier
Cc: netdev, devicetree, linux-stm32, linux-arm-kernel, linux-kernel
Both instances ethernet based on GMAC SNPS IP on stm32mp13.
GMAC IP version is SNPS 4.20.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
arch/arm/boot/dts/st/stm32mp131.dtsi | 31 ++++++++++++++++++++++++++++
arch/arm/boot/dts/st/stm32mp133.dtsi | 30 +++++++++++++++++++++++++++
2 files changed, 61 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index ac90fcbf0c09..d8339eea05d5 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -1296,6 +1296,37 @@ sdmmc2: mmc@58007000 {
status = "disabled";
};
+ ethernet1: ethernet@5800a000 {
+ compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800a000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 68 1>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "ethstp",
+ "eth-ck";
+ clocks = <&rcc ETH1MAC>,
+ <&rcc ETH1TX>,
+ <&rcc ETH1RX>,
+ <&rcc ETH1STP>,
+ <&rcc ETH1CK_K>;
+ st,syscon = <&syscfg 0x4 0xff0000>;
+ snps,mixed-burst;
+ snps,pbl = <2>;
+ snps,axi-config = <&stmmac_axi_config_1>;
+ snps,tso;
+ status = "disabled";
+
+ stmmac_axi_config_1: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+ };
+
usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
index df451c3c2a26..aee855cd2f36 100644
--- a/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -64,5 +64,35 @@ channel@18 {
};
};
};
+
+ ethernet2: ethernet@5800e000 {
+ compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800e000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts-extended = <&intc GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "ethstp",
+ "eth-ck";
+ clocks = <&rcc ETH2MAC>,
+ <&rcc ETH2TX>,
+ <&rcc ETH2RX>,
+ <&rcc ETH2STP>,
+ <&rcc ETH2CK_K>;
+ st,syscon = <&syscfg 0x4 0xff000000>;
+ snps,mixed-burst;
+ snps,pbl = <2>;
+ snps,axi-config = <&stmmac_axi_config_2>;
+ snps,tso;
+ status = "disabled";
+
+ stmmac_axi_config_2: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+ };
};
};
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 5/7] ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board
2023-09-21 15:06 [PATCH 0/7] Series to deliver Ethernets for STM32MP13 Christophe Roullier
` (3 preceding siblings ...)
2023-09-21 15:06 ` [PATCH 4/7] ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13 Christophe Roullier
@ 2023-09-21 15:06 ` Christophe Roullier
2023-09-21 15:06 ` [PATCH 6/7] ARM: dts: stm32: add ethernet1 and ethernet2 for STM32MP135F-DK board Christophe Roullier
2023-09-21 15:06 ` [PATCH 7/7] ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support Christophe Roullier
6 siblings, 0 replies; 10+ messages in thread
From: Christophe Roullier @ 2023-09-21 15:06 UTC (permalink / raw)
To: David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Richard Cochran, Jose Abreu, Liam Girdwood,
Mark Brown, Christophe Roullier
Cc: netdev, devicetree, linux-stm32, linux-arm-kernel, linux-kernel
Those pins are used for Ethernet 1 and 2 on STM32MP13F-DK board.
ethernet1: RMII with crystal.
ethernet2: RMII without crystal.
Add analog gpio pin configuration ("sleep") to manage power mode on
stm32mp13.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 71 +++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
index 27e0c3826789..b2583df813af 100644
--- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
@@ -13,6 +13,77 @@ pins {
};
};
+ eth1_rmii_pins_a: eth1-rmii-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RMII_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RMII_TX_EN */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */
+ <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+ <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RMII_RXD1 */
+ <STM32_PINMUX('C', 1, AF10)>; /* ETH_RMII_CRS_DV */
+ bias-disable;
+ };
+
+ };
+
+ eth1_rmii_sleep_pins_a: eth1-rmii-sleep-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RMII_TXD0 */
+ <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RMII_TX_EN */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RMII_REF_CLK */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RMII_RXD1 */
+ <STM32_PINMUX('C', 1, ANALOG)>; /* ETH_RMII_CRS_DV */
+ };
+ };
+
+ eth2_rmii_pins_a: eth2-rmii-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RMII_TXD0 */
+ <STM32_PINMUX('G', 11, AF10)>, /* ETH_RMII_TXD1 */
+ <STM32_PINMUX('G', 8, AF13)>, /* ETH_RMII_ETHCK */
+ <STM32_PINMUX('F', 6, AF11)>, /* ETH_RMII_TX_EN */
+ <STM32_PINMUX('B', 2, AF11)>, /* ETH_MDIO */
+ <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RMII_RXD0 */
+ <STM32_PINMUX('E', 2, AF10)>, /* ETH_RMII_RXD1 */
+ <STM32_PINMUX('A', 12, AF11)>; /* ETH_RMII_CRS_DV */
+ bias-disable;
+ };
+ };
+
+ eth2_rmii_sleep_pins_a: eth2-rmii-sleep-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RMII_TXD0 */
+ <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RMII_TXD1 */
+ <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RMII_ETHCK */
+ <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RMII_TX_EN */
+ <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RMII_RXD0 */
+ <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RMII_RXD1 */
+ <STM32_PINMUX('A', 12, ANALOG)>; /* ETH_RMII_CRS_DV */
+ };
+ };
+
i2c1_pins_a: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 6/7] ARM: dts: stm32: add ethernet1 and ethernet2 for STM32MP135F-DK board
2023-09-21 15:06 [PATCH 0/7] Series to deliver Ethernets for STM32MP13 Christophe Roullier
` (4 preceding siblings ...)
2023-09-21 15:06 ` [PATCH 5/7] ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board Christophe Roullier
@ 2023-09-21 15:06 ` Christophe Roullier
2023-09-21 15:06 ` [PATCH 7/7] ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support Christophe Roullier
6 siblings, 0 replies; 10+ messages in thread
From: Christophe Roullier @ 2023-09-21 15:06 UTC (permalink / raw)
To: David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Richard Cochran, Jose Abreu, Liam Girdwood,
Mark Brown, Christophe Roullier
Cc: netdev, devicetree, linux-stm32, linux-arm-kernel, linux-kernel
Add dual Ethernet:
-Ethernet1: RMII with crystal
-Ethernet2: RMII without crystal
With Ethernet1, we can performed WoL from PHY instead of GMAC point of view.
(in this case IRQ for WoL is managed as wakeup pin and configured
in OS secure).
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
arch/arm/boot/dts/st/stm32mp135f-dk.dts | 48 +++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index eea740d097c7..1316cc16f8dd 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -19,6 +19,8 @@ / {
compatible = "st,stm32mp135f-dk", "st,stm32mp135";
aliases {
+ ethernet0 = ðernet1;
+ ethernet1 = ðernet2;
serial0 = &uart4;
serial1 = &usart1;
serial2 = &uart8;
@@ -93,6 +95,52 @@ channel@12 {
};
};
+ðernet1 {
+ status = "okay";
+ pinctrl-0 = <ð1_rmii_pins_a>;
+ pinctrl-1 = <ð1_rmii_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rmii";
+ max-speed = <100>;
+ phy-handle = <&phy0_eth1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0_eth1: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0007.c131";
+ reset-gpios = <&mcp23017 9 GPIO_ACTIVE_LOW>;
+ reg = <0>;
+ wakeup-source;
+ };
+ };
+};
+
+ðernet2 {
+ status = "okay";
+ pinctrl-0 = <ð2_rmii_pins_a>;
+ pinctrl-1 = <ð2_rmii_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rmii";
+ max-speed = <100>;
+ phy-handle = <&phy0_eth2>;
+ st,ext-phyclk;
+ phy-supply = <&scmi_v3v3_sw>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0_eth2: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0007.c131";
+ reset-gpios = <&mcp23017 10 GPIO_ACTIVE_LOW>;
+ reg = <0>;
+ };
+ };
+};
+
&i2c1 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c1_pins_a>;
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 7/7] ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support
2023-09-21 15:06 [PATCH 0/7] Series to deliver Ethernets for STM32MP13 Christophe Roullier
` (5 preceding siblings ...)
2023-09-21 15:06 ` [PATCH 6/7] ARM: dts: stm32: add ethernet1 and ethernet2 for STM32MP135F-DK board Christophe Roullier
@ 2023-09-21 15:06 ` Christophe Roullier
6 siblings, 0 replies; 10+ messages in thread
From: Christophe Roullier @ 2023-09-21 15:06 UTC (permalink / raw)
To: David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Richard Cochran, Jose Abreu, Liam Girdwood,
Mark Brown, Christophe Roullier
Cc: netdev, devicetree, linux-stm32, linux-arm-kernel, linux-kernel
Need to enable MCP23S08 I/O expanders to manage Ethernet phy
reset in STM32MP135F-DK board
STMMAC driver defer is not silent, need to put this config in
built-in to avoid huge of Ethernet messages
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 23fc49f23d25..373f58f2d5b9 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -458,6 +458,7 @@ CONFIG_SPI_XILINX=y
CONFIG_SPI_SPIDEV=y
CONFIG_SPMI=y
CONFIG_PINCTRL_AS3722=y
+CONFIG_PINCTRL_MCP23S08=y
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
CONFIG_PINCTRL_OCELOT=y
CONFIG_PINCTRL_PALMAS=y
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread