devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andreas Kemnade <andreas@kemnade.info>
To: jic23@kernel.org, lars@metafoo.de, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
	bcousson@baylibre.com, tony@atomide.com,
	jean-baptiste.maneyrol@tdk.com, chenhuiz@axis.com,
	andreas@kemnade.info, andy.shevchenko@gmail.com,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org
Subject: [PATCH 2/3] iio: imu: mpu6050: add level shifter flag
Date: Mon, 25 Sep 2023 00:25:58 +0200	[thread overview]
Message-ID: <20230924222559.2038721-3-andreas@kemnade.info> (raw)
In-Reply-To: <20230924222559.2038721-1-andreas@kemnade.info>

Some boards fail in magnetometer probe if flag is not set.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c  | 5 +++++
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 3 +++
 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h  | 1 +
 3 files changed, 9 insertions(+)

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
index 7327e5723f961..15dbe88ff8c43 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
@@ -71,6 +71,11 @@ int inv_mpu_aux_init(const struct inv_mpu6050_state *st)
 	unsigned int val;
 	int ret;
 
+	ret = regmap_update_bits(st->map, 0x1, 0x80,
+				 st->level_shifter ? 0x80 : 0);
+	if (ret)
+		return ret;
+
 	/* configure i2c master */
 	val = INV_MPU6050_BITS_I2C_MST_CLK_400KHZ |
 			INV_MPU6050_BIT_WAIT_FOR_ES;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 29f906c884bd8..21cf794a41561 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -17,6 +17,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 
 #include <linux/iio/common/inv_sensors_timestamp.h>
 #include <linux/iio/iio.h>
@@ -1495,6 +1496,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 	st->irq = irq;
 	st->map = regmap;
 
+	st->level_shifter = device_property_present(dev,
+						    "invensense,level-shifter");
 	pdata = dev_get_platdata(dev);
 	if (!pdata) {
 		result = iio_read_mount_matrix(dev, &st->orientation);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index ed5a96e78df05..7eba1439c8093 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -203,6 +203,7 @@ struct inv_mpu6050_state {
 	s32 magn_raw_to_gauss[3];
 	struct iio_mount_matrix magn_orient;
 	unsigned int suspended_sensors;
+	bool level_shifter;
 	u8 *data;
 };
 
-- 
2.39.2


  parent reply	other threads:[~2023-09-24 22:26 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-24 22:25 [PATCH 0/3] ARM: omap: omap4-embt2ws: Add IMU on control unit Andreas Kemnade
2023-09-24 22:25 ` [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter Andreas Kemnade
2023-09-24 23:33   ` Rob Herring
2023-09-24 23:39   ` kernel test robot
2023-09-25  6:54   ` Krzysztof Kozlowski
2023-09-25 10:28     ` Jonathan Cameron
2023-09-25 11:02       ` Andreas Kemnade
2023-09-25 12:24         ` Krzysztof Kozlowski
2023-09-25 13:21           ` Jonathan Cameron
2023-09-25 14:25             ` Jean-Baptiste Maneyrol
2023-09-25 18:02             ` Andreas Kemnade
2023-09-24 22:25 ` Andreas Kemnade [this message]
2023-09-25 11:07   ` [PATCH 2/3] iio: imu: mpu6050: add level shifter flag Andy Shevchenko
2023-09-25 11:14     ` Jean-Baptiste Maneyrol
2023-09-25 12:04     ` Andreas Kemnade
2023-09-25 12:28       ` Andy Shevchenko
2023-09-24 22:25 ` [PATCH 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit Andreas Kemnade
2023-09-25  6:53   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230924222559.2038721-3-andreas@kemnade.info \
    --to=andreas@kemnade.info \
    --cc=andy.shevchenko@gmail.com \
    --cc=bcousson@baylibre.com \
    --cc=chenhuiz@axis.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jean-baptiste.maneyrol@tdk.com \
    --cc=jic23@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).