* [PATCH v2 1/6] arm64: dts: ls1043a: remove second dspi node
2023-08-29 9:26 [PATCH v2 0/6] TQMLS10xxA support Gregor Herburger
@ 2023-08-29 9:26 ` Gregor Herburger
2023-08-29 9:26 ` [PATCH v2 2/6] dt-bindings: arm: fsl: Add TQ-Systems LS1043A/LS1046A based boards Gregor Herburger
` (4 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Gregor Herburger @ 2023-08-29 9:26 UTC (permalink / raw)
To: Shawn Guo, Li Yang, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, linux,
gregor.herburger
According to the documentation the ls1043a has only one spi controller.
So remove the second one.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index f8acbefc805b..229bb4bebe42 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -526,20 +526,6 @@ dspi0: spi@2100000 {
status = "disabled";
};
- dspi1: spi@2110000 {
- compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2110000 0x0 0x10000>;
- interrupts = <0 65 0x4>;
- clock-names = "dspi";
- clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
- QORIQ_CLK_PLL_DIV(1)>;
- spi-num-chipselects = <5>;
- big-endian;
- status = "disabled";
- };
-
i2c0: i2c@2180000 {
compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v2 2/6] dt-bindings: arm: fsl: Add TQ-Systems LS1043A/LS1046A based boards
2023-08-29 9:26 [PATCH v2 0/6] TQMLS10xxA support Gregor Herburger
2023-08-29 9:26 ` [PATCH v2 1/6] arm64: dts: ls1043a: remove second dspi node Gregor Herburger
@ 2023-08-29 9:26 ` Gregor Herburger
2023-08-29 9:26 ` [PATCH v2 3/6] arm64: dts: freescale: add initial device tree for TQMLS1043A/TQMLS1046A Gregor Herburger
` (3 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Gregor Herburger @ 2023-08-29 9:26 UTC (permalink / raw)
To: Shawn Guo, Li Yang, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, linux,
gregor.herburger, Conor Dooley
TQMLS1043A and TQMLS1046A use the LS1043A LS1046A SOC on a common
layout.
MBLS10XXA is a starterkit baseboard usable for both SOMs.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 9450b2c8a678..55e8279d834b 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1389,6 +1389,13 @@ properties:
- fsl,ls1043a-qds
- const: fsl,ls1043a
+ - description: TQ-Systems LS1043A based Boards
+ items:
+ - enum:
+ - tq,ls1043a-tqmls1043a-mbls10xxa
+ - const: tq,ls1043a-tqmls1043a
+ - const: fsl,ls1043a
+
- description: LS1046A based Boards
items:
- enum:
@@ -1397,6 +1404,13 @@ properties:
- fsl,ls1046a-rdb
- const: fsl,ls1046a
+ - description: TQ-Systems LS1046A based Boards
+ items:
+ - enum:
+ - tq,ls1046a-tqmls1046a-mbls10xxa
+ - const: tq,ls1046a-tqmls1046a
+ - const: fsl,ls1046a
+
- description: LS1088A based Boards
items:
- enum:
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v2 3/6] arm64: dts: freescale: add initial device tree for TQMLS1043A/TQMLS1046A
2023-08-29 9:26 [PATCH v2 0/6] TQMLS10xxA support Gregor Herburger
2023-08-29 9:26 ` [PATCH v2 1/6] arm64: dts: ls1043a: remove second dspi node Gregor Herburger
2023-08-29 9:26 ` [PATCH v2 2/6] dt-bindings: arm: fsl: Add TQ-Systems LS1043A/LS1046A based boards Gregor Herburger
@ 2023-08-29 9:26 ` Gregor Herburger
2023-09-25 0:59 ` Shawn Guo
2023-08-29 9:27 ` [PATCH v2 4/6] dt-bindings: arm: fsl: Add TQ-Systems LS1088 based boards Gregor Herburger
` (2 subsequent siblings)
5 siblings, 1 reply; 11+ messages in thread
From: Gregor Herburger @ 2023-08-29 9:26 UTC (permalink / raw)
To: Shawn Guo, Li Yang, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, linux,
gregor.herburger
This adds support for the TQMLS1043A and TQMLS1046A SOM and the
MBLS10xxA baseboard. TQMLS1043A and TQMLS1046A share a common layout
and can be used on the MBLS10xxA.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
---
arch/arm64/boot/dts/freescale/Makefile | 2 +
.../freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts | 49 ++++++++
.../boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi | 32 +++++
.../freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts | 56 +++++++++
.../boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi | 42 +++++++
.../dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi | 104 ++++++++++++++++
.../boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi | 136 +++++++++++++++++++++
arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi | 58 +++++++++
8 files changed, 479 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index c6872b7e9471..8bb67d1e8f4d 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -15,9 +15,11 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-tqmls1043a-mbls10xxa.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
new file mode 100644
index 000000000000..599101d06f74
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "fsl-ls1043a-tqmls1043a.dtsi"
+#include "tqmls10xxa-mbls10xxa.dtsi"
+
+/ {
+ model = "TQ-Systems GmbH LS1043A TQMLS1043A SoM on MBLS10xxA board";
+ compatible = "tq,ls1043a-tqmls1043a-mbls10xxa", "tq,ls1043a-tqmls1043a",
+ "fsl,ls1043a";
+
+ aliases {
+ serial0 = &duart0;
+ serial1 = &duart1;
+ qsgmii-s1-p1 = &qsgmii1_phy1;
+ qsgmii-s1-p2 = &qsgmii1_phy2;
+ qsgmii-s1-p3 = &qsgmii1_phy3;
+ qsgmii-s1-p4 = &qsgmii1_phy4;
+ qsgmii-s2-p1 = &qsgmii2_phy1;
+ qsgmii-s2-p2 = &qsgmii2_phy2;
+ qsgmii-s2-p3 = &qsgmii2_phy3;
+ qsgmii-s2-p4 = &qsgmii2_phy4;
+ };
+
+ chosen {
+ stdout-path = &duart1;
+ };
+};
+
+&esdhc {
+ cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+};
+
+&usb2 {
+ status = "okay";
+};
+
+#include "fsl-ls1043-post.dtsi"
+#include "tqmls104xa-mbls10xxa-fman.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
new file mode 100644
index 000000000000..12d5f3938e5d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for LS1043A based SoM of TQ
+ */
+
+#include "fsl-ls1043a.dtsi"
+#include "tqmls10xxa.dtsi"
+
+&qspi {
+ num-cs = <2>;
+ status = "okay";
+
+ qflash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <62500000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
new file mode 100644
index 000000000000..12e1460bd3da
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "fsl-ls1046a-tqmls1046a.dtsi"
+#include "tqmls10xxa-mbls10xxa.dtsi"
+
+/ {
+ model = "TQ-Systems GmbH LS1046A TQMLS1046A SoM on MBLS10xxA board";
+ compatible = "tq,ls1046a-tqmls1046a-mbls10xxa", "tq,ls1046a-tqmls1046a",
+ "fsl,ls1046a";
+
+ aliases {
+ serial0 = &duart0;
+ serial1 = &duart1;
+ qsgmii-s1-p1 = &qsgmii1_phy1;
+ qsgmii-s1-p2 = &qsgmii1_phy2;
+ qsgmii-s1-p3 = &qsgmii1_phy3;
+ qsgmii-s1-p4 = &qsgmii1_phy4;
+ qsgmii-s2-p1 = &qsgmii2_phy1;
+ qsgmii-s2-p2 = &qsgmii2_phy2;
+ qsgmii-s2-p3 = &qsgmii2_phy3;
+ qsgmii-s2-p4 = &qsgmii2_phy4;
+ };
+
+ chosen {
+ stdout-path = &duart1;
+ };
+};
+
+&dspi {
+ status = "okay";
+};
+
+&esdhc {
+ cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+};
+
+&usb2 {
+ status = "okay";
+};
+
+#include "fsl-ls1046-post.dtsi"
+#include "tqmls104xa-mbls10xxa-fman.dtsi"
+
+&enet7 {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
new file mode 100644
index 000000000000..4a8f8bc688f5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for LS1046A based SoM of TQ
+ */
+
+#include "fsl-ls1046a.dtsi"
+#include "tqmls10xxa.dtsi"
+
+&qspi {
+ num-cs = <2>;
+ status = "okay";
+
+ qflash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <62500000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ qflash1: flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <62500000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi
new file mode 100644
index 000000000000..4c38dd541143
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2019,2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for MBLS10xxA from TQ (FMAN related sections)
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+&enet0 {
+ status = "disabled";
+};
+
+&enet1 {
+ status = "disabled";
+};
+
+&enet2 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&enet3 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&enet4 {
+ status = "disabled";
+};
+
+&enet5 {
+ status = "disabled";
+};
+
+&enet6 {
+ status = "disabled";
+};
+
+&mdio0 {
+ status = "okay";
+
+ qsgmii2_phy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x00>;
+ };
+
+ qsgmii2_phy2: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x01>;
+ };
+
+ qsgmii2_phy3: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x02>;
+ };
+
+ qsgmii2_phy4: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x03>;
+ };
+
+ rgmii_phy2: ethernet-phy@c {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0c>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ };
+
+ rgmii_phy1: ethernet-phy@e {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0e>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ };
+
+ qsgmii1_phy1: ethernet-phy@1c {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1c>;
+ };
+
+ qsgmii1_phy2: ethernet-phy@1d {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1d>;
+ };
+
+ qsgmii1_phy3: ethernet-phy@1e {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1e>;
+ };
+
+ qsgmii1_phy4: ethernet-phy@1f {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1f>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
new file mode 100644
index 000000000000..65b4ed28a3d4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for MBLS10xxA from TQ
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+ autorepeat;
+
+ button-0 {
+ label = "button0";
+ gpios = <&gpioexp3 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F1>;
+ };
+
+ button-1 {
+ label = "button1";
+ gpios = <&gpioexp3 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F2>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-user {
+ gpios = <&gpioexp3 13 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_MB";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&esdhc {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9544";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpioexp1: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ vcc-supply = <®_3v3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpioexp2: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ vcc-supply = <®_3v3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpioexp3: gpio@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ vcc-supply = <®_3v3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ sfp1_i2c: i2c@1 {
+ reg = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ sfp2_i2c: i2c@2 {
+ reg = <0x2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c@3 {
+ reg = <0x3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "otg";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
new file mode 100644
index 000000000000..138f8778afde
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for TQMLs10xxA SoM of TQ
+ */
+
+/ {
+ reg_vcc3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ temperature-sensor@18 {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x18>;
+ };
+
+ eeprom@50 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ vcc-supply = <®_vcc3v3>;
+ read-only;
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf85063a";
+ reg = <0x51>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <32>;
+ vcc-supply = <®_vcc3v3>;
+ };
+};
+
+&esdhc {
+ /* eSDHC or eMMC: set by bootloader */
+ non-removable;
+ disable-wp;
+ mmc-hs200-1_8v;
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v2 3/6] arm64: dts: freescale: add initial device tree for TQMLS1043A/TQMLS1046A
2023-08-29 9:26 ` [PATCH v2 3/6] arm64: dts: freescale: add initial device tree for TQMLS1043A/TQMLS1046A Gregor Herburger
@ 2023-09-25 0:59 ` Shawn Guo
0 siblings, 0 replies; 11+ messages in thread
From: Shawn Guo @ 2023-09-25 0:59 UTC (permalink / raw)
To: Gregor Herburger
Cc: Li Yang, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
linux-arm-kernel, devicetree, linux-kernel, linux
On Tue, Aug 29, 2023 at 11:26:59AM +0200, Gregor Herburger wrote:
> This adds support for the TQMLS1043A and TQMLS1046A SOM and the
> MBLS10xxA baseboard. TQMLS1043A and TQMLS1046A share a common layout
> and can be used on the MBLS10xxA.
>
> Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 2 +
> .../freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts | 49 ++++++++
> .../boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi | 32 +++++
> .../freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts | 56 +++++++++
> .../boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi | 42 +++++++
> .../dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi | 104 ++++++++++++++++
> .../boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi | 136 +++++++++++++++++++++
> arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi | 58 +++++++++
> 8 files changed, 479 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index c6872b7e9471..8bb67d1e8f4d 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -15,9 +15,11 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-tqmls1043a-mbls10xxa.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
> new file mode 100644
> index 000000000000..599101d06f74
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
> @@ -0,0 +1,49 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +#include "fsl-ls1043a-tqmls1043a.dtsi"
> +#include "tqmls10xxa-mbls10xxa.dtsi"
> +
> +/ {
> + model = "TQ-Systems GmbH LS1043A TQMLS1043A SoM on MBLS10xxA board";
> + compatible = "tq,ls1043a-tqmls1043a-mbls10xxa", "tq,ls1043a-tqmls1043a",
> + "fsl,ls1043a";
> +
> + aliases {
> + serial0 = &duart0;
> + serial1 = &duart1;
> + qsgmii-s1-p1 = &qsgmii1_phy1;
Sort the list alphabetically.
Shawn
> + qsgmii-s1-p2 = &qsgmii1_phy2;
> + qsgmii-s1-p3 = &qsgmii1_phy3;
> + qsgmii-s1-p4 = &qsgmii1_phy4;
> + qsgmii-s2-p1 = &qsgmii2_phy1;
> + qsgmii-s2-p2 = &qsgmii2_phy2;
> + qsgmii-s2-p3 = &qsgmii2_phy3;
> + qsgmii-s2-p4 = &qsgmii2_phy4;
> + };
> +
> + chosen {
> + stdout-path = &duart1;
> + };
> +};
> +
> +&esdhc {
> + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usb2 {
> + status = "okay";
> +};
> +
> +#include "fsl-ls1043-post.dtsi"
> +#include "tqmls104xa-mbls10xxa-fman.dtsi"
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
> new file mode 100644
> index 000000000000..12d5f3938e5d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
> @@ -0,0 +1,32 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for LS1043A based SoM of TQ
> + */
> +
> +#include "fsl-ls1043a.dtsi"
> +#include "tqmls10xxa.dtsi"
> +
> +&qspi {
> + num-cs = <2>;
> + status = "okay";
> +
> + qflash0: flash@0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <62500000>;
> + spi-rx-bus-width = <4>;
> + spi-tx-bus-width = <4>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
> new file mode 100644
> index 000000000000..12e1460bd3da
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
> @@ -0,0 +1,56 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +#include "fsl-ls1046a-tqmls1046a.dtsi"
> +#include "tqmls10xxa-mbls10xxa.dtsi"
> +
> +/ {
> + model = "TQ-Systems GmbH LS1046A TQMLS1046A SoM on MBLS10xxA board";
> + compatible = "tq,ls1046a-tqmls1046a-mbls10xxa", "tq,ls1046a-tqmls1046a",
> + "fsl,ls1046a";
> +
> + aliases {
> + serial0 = &duart0;
> + serial1 = &duart1;
> + qsgmii-s1-p1 = &qsgmii1_phy1;
> + qsgmii-s1-p2 = &qsgmii1_phy2;
> + qsgmii-s1-p3 = &qsgmii1_phy3;
> + qsgmii-s1-p4 = &qsgmii1_phy4;
> + qsgmii-s2-p1 = &qsgmii2_phy1;
> + qsgmii-s2-p2 = &qsgmii2_phy2;
> + qsgmii-s2-p3 = &qsgmii2_phy3;
> + qsgmii-s2-p4 = &qsgmii2_phy4;
> + };
> +
> + chosen {
> + stdout-path = &duart1;
> + };
> +};
> +
> +&dspi {
> + status = "okay";
> +};
> +
> +&esdhc {
> + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usb2 {
> + status = "okay";
> +};
> +
> +#include "fsl-ls1046-post.dtsi"
> +#include "tqmls104xa-mbls10xxa-fman.dtsi"
> +
> +&enet7 {
> + status = "disabled";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
> new file mode 100644
> index 000000000000..4a8f8bc688f5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
> @@ -0,0 +1,42 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for LS1046A based SoM of TQ
> + */
> +
> +#include "fsl-ls1046a.dtsi"
> +#include "tqmls10xxa.dtsi"
> +
> +&qspi {
> + num-cs = <2>;
> + status = "okay";
> +
> + qflash0: flash@0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <62500000>;
> + spi-rx-bus-width = <4>;
> + spi-tx-bus-width = <4>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> + };
> +
> + qflash1: flash@1 {
> + compatible = "jedec,spi-nor";
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <62500000>;
> + spi-rx-bus-width = <4>;
> + spi-tx-bus-width = <4>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi
> new file mode 100644
> index 000000000000..4c38dd541143
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi
> @@ -0,0 +1,104 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2019,2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for MBLS10xxA from TQ (FMAN related sections)
> + */
> +
> +#include <dt-bindings/net/ti-dp83867.h>
> +
> +&enet0 {
> + status = "disabled";
> +};
> +
> +&enet1 {
> + status = "disabled";
> +};
> +
> +&enet2 {
> + phy-handle = <&rgmii_phy1>;
> + phy-connection-type = "rgmii";
> + phy-mode = "rgmii-id";
> + status = "okay";
> +};
> +
> +&enet3 {
> + phy-handle = <&rgmii_phy2>;
> + phy-connection-type = "rgmii";
> + phy-mode = "rgmii-id";
> + status = "okay";
> +};
> +
> +&enet4 {
> + status = "disabled";
> +};
> +
> +&enet5 {
> + status = "disabled";
> +};
> +
> +&enet6 {
> + status = "disabled";
> +};
> +
> +&mdio0 {
> + status = "okay";
> +
> + qsgmii2_phy1: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x00>;
> + };
> +
> + qsgmii2_phy2: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x01>;
> + };
> +
> + qsgmii2_phy3: ethernet-phy@2 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x02>;
> + };
> +
> + qsgmii2_phy4: ethernet-phy@3 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x03>;
> + };
> +
> + rgmii_phy2: ethernet-phy@c {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x0c>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
> + };
> +
> + rgmii_phy1: ethernet-phy@e {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x0e>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
> + };
> +
> + qsgmii1_phy1: ethernet-phy@1c {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1c>;
> + };
> +
> + qsgmii1_phy2: ethernet-phy@1d {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1d>;
> + };
> +
> + qsgmii1_phy3: ethernet-phy@1e {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1e>;
> + };
> +
> + qsgmii1_phy4: ethernet-phy@1f {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1f>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
> new file mode 100644
> index 000000000000..65b4ed28a3d4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
> @@ -0,0 +1,136 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for MBLS10xxA from TQ
> + */
> +
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + poll-interval = <100>;
> + autorepeat;
> +
> + button-0 {
> + label = "button0";
> + gpios = <&gpioexp3 5 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_F1>;
> + };
> +
> + button-1 {
> + label = "button1";
> + gpios = <&gpioexp3 6 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_F2>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led-user {
> + gpios = <&gpioexp3 13 GPIO_ACTIVE_LOW>;
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_HEARTBEAT;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + reg_3v3: regulator-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "V_3V3_MB";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> +
> +&duart0 {
> + status = "okay";
> +};
> +
> +&duart1 {
> + status = "okay";
> +};
> +
> +&esdhc {
> + status = "okay";
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + i2c-mux@70 {
> + compatible = "nxp,pca9544";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c@0 {
> + reg = <0x0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpioexp1: gpio@20 {
> + compatible = "nxp,pca9555";
> + reg = <0x20>;
> + vcc-supply = <®_3v3>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpioexp2: gpio@21 {
> + compatible = "nxp,pca9555";
> + reg = <0x21>;
> + vcc-supply = <®_3v3>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpioexp3: gpio@22 {
> + compatible = "nxp,pca9555";
> + reg = <0x22>;
> + vcc-supply = <®_3v3>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> +
> + sfp1_i2c: i2c@1 {
> + reg = <0x1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + sfp2_i2c: i2c@2 {
> + reg = <0x2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c@3 {
> + reg = <0x3>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +};
> +
> +&sata {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + dr_mode = "otg";
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
> new file mode 100644
> index 000000000000..138f8778afde
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
> @@ -0,0 +1,58 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for TQMLs10xxA SoM of TQ
> + */
> +
> +/ {
> + reg_vcc3v3: regulator-vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + temperature-sensor@18 {
> + compatible = "nxp,se97b", "jedec,jc-42.4-temp";
> + reg = <0x18>;
> + };
> +
> + eeprom@50 {
> + compatible = "nxp,se97b", "atmel,24c02";
> + reg = <0x50>;
> + pagesize = <16>;
> + vcc-supply = <®_vcc3v3>;
> + read-only;
> + };
> +
> + rtc@51 {
> + compatible = "nxp,pcf85063a";
> + reg = <0x51>;
> + };
> +
> + eeprom@57 {
> + compatible = "atmel,24c64";
> + reg = <0x57>;
> + pagesize = <32>;
> + vcc-supply = <®_vcc3v3>;
> + };
> +};
> +
> +&esdhc {
> + /* eSDHC or eMMC: set by bootloader */
> + non-removable;
> + disable-wp;
> + mmc-hs200-1_8v;
> + sd-uhs-sdr104;
> + sd-uhs-sdr50;
> + sd-uhs-sdr25;
> + sd-uhs-sdr12;
> +};
>
> --
> 2.34.1
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 4/6] dt-bindings: arm: fsl: Add TQ-Systems LS1088 based boards
2023-08-29 9:26 [PATCH v2 0/6] TQMLS10xxA support Gregor Herburger
` (2 preceding siblings ...)
2023-08-29 9:26 ` [PATCH v2 3/6] arm64: dts: freescale: add initial device tree for TQMLS1043A/TQMLS1046A Gregor Herburger
@ 2023-08-29 9:27 ` Gregor Herburger
2023-08-29 9:27 ` [PATCH v2 5/6] arm64: dts: freescale: add initial device tree for TQMLS1088A Gregor Herburger
2023-08-29 9:27 ` [PATCH v2 6/6] MAINTAINERS: add tqml device trees to TQ-Systems entry Gregor Herburger
5 siblings, 0 replies; 11+ messages in thread
From: Gregor Herburger @ 2023-08-29 9:27 UTC (permalink / raw)
To: Shawn Guo, Li Yang, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, linux,
gregor.herburger, Conor Dooley
TQMLS1088a uses a common board layout with TQMLS1043A/TQMLS1046A.
MBLS10XXA is a starterkit baseboard usable for these SOMs.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 55e8279d834b..509ba52aa3cf 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1418,6 +1418,13 @@ properties:
- fsl,ls1088a-rdb
- const: fsl,ls1088a
+ - description: TQ-Systems LS1088A based Boards
+ items:
+ - enum:
+ - tq,ls1088a-tqmls1088a-mbls10xxa
+ - const: tq,ls1088a-tqmls1088a
+ - const: fsl,ls1088a
+
- description: LS2080A based Boards
items:
- enum:
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v2 5/6] arm64: dts: freescale: add initial device tree for TQMLS1088A
2023-08-29 9:26 [PATCH v2 0/6] TQMLS10xxA support Gregor Herburger
` (3 preceding siblings ...)
2023-08-29 9:27 ` [PATCH v2 4/6] dt-bindings: arm: fsl: Add TQ-Systems LS1088 based boards Gregor Herburger
@ 2023-08-29 9:27 ` Gregor Herburger
2023-08-29 9:27 ` [PATCH v2 6/6] MAINTAINERS: add tqml device trees to TQ-Systems entry Gregor Herburger
5 siblings, 0 replies; 11+ messages in thread
From: Gregor Herburger @ 2023-08-29 9:27 UTC (permalink / raw)
To: Shawn Guo, Li Yang, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, linux,
gregor.herburger
This adds support for TQMLS1088A SOM on MBLS10xxA baseboard.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts | 64 +++++++++
.../boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi | 43 ++++++
.../dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi | 146 +++++++++++++++++++++
4 files changed, 254 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 8bb67d1e8f4d..b632b17a8391 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-tqmls1088a-mbls10xxa.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
new file mode 100644
index 000000000000..e567918f6afc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "fsl-ls1088a-tqmls1088a.dtsi"
+#include "tqmls10xxa-mbls10xxa.dtsi"
+
+/ {
+ model = "TQ-Systems GmbH LS1088A TQMLS1088A SoM on MBLS10xxA board";
+ compatible = "tq,ls1088a-tqmls1088a-mbls10xxa", "tq,ls1088a-tqmls1088a",
+ "fsl,ls1088a";
+
+ aliases {
+ dpmac1 = &dpmac1;
+ dpmac2 = &dpmac2;
+ dpmac3 = &dpmac3;
+ dpmac4 = &dpmac4;
+ dpmac5 = &dpmac5;
+ dpmac6 = &dpmac6;
+ dpmac7 = &dpmac7;
+ dpmac8 = &dpmac8;
+ dpmac9 = &dpmac9;
+ dpmac10 = &dpmac10;
+ qsgmii-s1-p1 = &qsgmii1_phy1;
+ qsgmii-s1-p2 = &qsgmii1_phy2;
+ qsgmii-s1-p3 = &qsgmii1_phy3;
+ qsgmii-s1-p4 = &qsgmii1_phy4;
+ qsgmii-s2-p1 = &qsgmii2_phy1;
+ qsgmii-s2-p2 = &qsgmii2_phy2;
+ qsgmii-s2-p3 = &qsgmii2_phy3;
+ qsgmii-s2-p4 = &qsgmii2_phy4;
+ rgmii-s1 = &rgmii_phy1;
+ rgmii-s2 = &rgmii_phy2;
+ serial0 = &duart0;
+ serial1 = &duart1;
+ };
+
+ chosen {
+ stdout-path = &duart1;
+ };
+};
+
+&esdhc {
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+};
+
+&sfp1_i2c {
+ status = "okay";
+};
+
+&sfp2_i2c {
+ status = "okay";
+};
+
+#include "tqmls1088a-mbls10xxa-mc.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
new file mode 100644
index 000000000000..40da8d4807de
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for LS1088A based SoM of TQ
+ */
+
+#include "fsl-ls1088a.dtsi"
+#include "tqmls10xxa.dtsi"
+
+&qspi {
+ num-cs = <2>;
+ status = "okay";
+
+ qflash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <62500000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ qflash1: flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <62500000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ };
+};
+
diff --git a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
new file mode 100644
index 000000000000..2471bb109e8e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for MBLS10xxA from TQ (MC related sections)
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ sfp1: sfp1 {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp1_i2c>;
+ mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp2: sfp2 {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp2_i2c>;
+ mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&dpmac1 {
+ pcs-handle = <&pcs1>;
+};
+
+&dpmac2 {
+ pcs-handle = <&pcs2>;
+};
+
+&dpmac3 {
+ pcs-handle = <&pcs3_0>;
+};
+
+&dpmac4 {
+ pcs-handle = <&pcs3_1>;
+};
+
+&dpmac5 {
+ pcs-handle = <&pcs3_2>;
+};
+
+&dpmac6 {
+ pcs-handle = <&pcs3_3>;
+};
+
+&dpmac7 {
+ pcs-handle = <&pcs7_0>;
+};
+
+&dpmac8 {
+ pcs-handle = <&pcs7_1>;
+};
+
+&dpmac9 {
+ pcs-handle = <&pcs7_2>;
+};
+
+&dpmac10 {
+ pcs-handle = <&pcs7_3>;
+};
+
+&emdio1 {
+ status = "okay";
+
+ qsgmii2_phy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x00>;
+ };
+
+ qsgmii2_phy2: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x01>;
+ };
+
+ qsgmii2_phy3: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x02>;
+ };
+
+ qsgmii2_phy4: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x03>;
+ };
+
+ rgmii_phy2: ethernet-phy@c {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0c>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ };
+
+ rgmii_phy1: ethernet-phy@e {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0e>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ };
+
+ qsgmii1_phy1: ethernet-phy@1c {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1c>;
+ };
+
+ qsgmii1_phy2: ethernet-phy@1d {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1d>;
+ };
+
+ qsgmii1_phy3: ethernet-phy@1e {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1e>;
+ };
+
+ qsgmii1_phy4: ethernet-phy@1f {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1f>;
+ };
+};
+
+&pcs_mdio1 {
+ status = "okay";
+};
+
+&pcs_mdio2 {
+ status = "okay";
+};
+
+&pcs_mdio3 {
+ status = "okay";
+};
+
+&pcs_mdio7 {
+ status = "okay";
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v2 6/6] MAINTAINERS: add tqml device trees to TQ-Systems entry
2023-08-29 9:26 [PATCH v2 0/6] TQMLS10xxA support Gregor Herburger
` (4 preceding siblings ...)
2023-08-29 9:27 ` [PATCH v2 5/6] arm64: dts: freescale: add initial device tree for TQMLS1088A Gregor Herburger
@ 2023-08-29 9:27 ` Gregor Herburger
2023-09-25 1:04 ` Shawn Guo
5 siblings, 1 reply; 11+ messages in thread
From: Gregor Herburger @ 2023-08-29 9:27 UTC (permalink / raw)
To: Shawn Guo, Li Yang, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, linux,
gregor.herburger
Update file entries for TQ-Systems Layerscape modules.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
---
MAINTAINERS | 2 ++
1 file changed, 2 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 38ea23fa1b00..c1e9a5415d30 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21788,9 +21788,11 @@ W: https://www.tq-group.com/en/products/tq-embedded/
F: arch/arm/boot/dts/imx*mba*.dts*
F: arch/arm/boot/dts/imx*tqma*.dts*
F: arch/arm/boot/dts/mba*.dtsi
+F: arch/arm64/boot/dts/freescale/fsl-*tqml*.dts*
F: arch/arm64/boot/dts/freescale/imx*mba*.dts*
F: arch/arm64/boot/dts/freescale/imx*tqma*.dts*
F: arch/arm64/boot/dts/freescale/mba*.dtsi
+F: arch/arm64/boot/dts/freescale/tqml*.dts*
F: drivers/gpio/gpio-tqmx86.c
F: drivers/mfd/tqmx86.c
F: drivers/watchdog/tqmx86_wdt.c
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v2 6/6] MAINTAINERS: add tqml device trees to TQ-Systems entry
2023-08-29 9:27 ` [PATCH v2 6/6] MAINTAINERS: add tqml device trees to TQ-Systems entry Gregor Herburger
@ 2023-09-25 1:04 ` Shawn Guo
2023-09-25 5:30 ` Arnd Bergmann
0 siblings, 1 reply; 11+ messages in thread
From: Shawn Guo @ 2023-09-25 1:04 UTC (permalink / raw)
To: Gregor Herburger, Arnd Bergmann
Cc: Li Yang, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
linux-arm-kernel, devicetree, linux-kernel, linux
+ Arnd
On Tue, Aug 29, 2023 at 11:27:02AM +0200, Gregor Herburger wrote:
> Update file entries for TQ-Systems Layerscape modules.
>
> Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
> ---
> MAINTAINERS | 2 ++
I do not have a branch for this file, so you may want to send the
change to Arnd directly.
Shawn
> 1 file changed, 2 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 38ea23fa1b00..c1e9a5415d30 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -21788,9 +21788,11 @@ W: https://www.tq-group.com/en/products/tq-embedded/
> F: arch/arm/boot/dts/imx*mba*.dts*
> F: arch/arm/boot/dts/imx*tqma*.dts*
> F: arch/arm/boot/dts/mba*.dtsi
> +F: arch/arm64/boot/dts/freescale/fsl-*tqml*.dts*
> F: arch/arm64/boot/dts/freescale/imx*mba*.dts*
> F: arch/arm64/boot/dts/freescale/imx*tqma*.dts*
> F: arch/arm64/boot/dts/freescale/mba*.dtsi
> +F: arch/arm64/boot/dts/freescale/tqml*.dts*
> F: drivers/gpio/gpio-tqmx86.c
> F: drivers/mfd/tqmx86.c
> F: drivers/watchdog/tqmx86_wdt.c
>
> --
> 2.34.1
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 6/6] MAINTAINERS: add tqml device trees to TQ-Systems entry
2023-09-25 1:04 ` Shawn Guo
@ 2023-09-25 5:30 ` Arnd Bergmann
2023-09-25 6:48 ` Krzysztof Kozlowski
0 siblings, 1 reply; 11+ messages in thread
From: Arnd Bergmann @ 2023-09-25 5:30 UTC (permalink / raw)
To: Shawn Guo, Gregor Herburger
Cc: Leo Li, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
linux-arm-kernel, devicetree, linux-kernel, linux
On Mon, Sep 25, 2023, at 03:04, Shawn Guo wrote:
> + Arnd
>
> On Tue, Aug 29, 2023 at 11:27:02AM +0200, Gregor Herburger wrote:
>> Update file entries for TQ-Systems Layerscape modules.
>>
>> Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
>> ---
>
> I do not have a branch for this file, so you may want to send the
> change to Arnd directly.
The MAINTAINERS files can usually go into the same branch
as arch/arm/mach-*/ and arch/arm64/Kconfig changes. If you have
nothing for that, merging this one along with the corresponding
arch/arm64/boot/dts changes is also fine.
We used to have a separate branch just for the maintainer
file updates a long time ago, but they rarely cause conflicts.
Whichever way you end up doing it, please ensure that the person
sending the pull request or patch addresses it to:soc@kernel.org
cc:linux-arm-kernel@lists.infradead.org to make it end up in
patchwork, otherwise I'm more likely to miss it or expect that
I'll get it as part of the normal pull requests.
Arnd
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH v2 6/6] MAINTAINERS: add tqml device trees to TQ-Systems entry
2023-09-25 5:30 ` Arnd Bergmann
@ 2023-09-25 6:48 ` Krzysztof Kozlowski
0 siblings, 0 replies; 11+ messages in thread
From: Krzysztof Kozlowski @ 2023-09-25 6:48 UTC (permalink / raw)
To: Arnd Bergmann, Shawn Guo, Gregor Herburger
Cc: Leo Li, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
linux-arm-kernel, devicetree, linux-kernel, linux
On 25/09/2023 07:30, Arnd Bergmann wrote:
> On Mon, Sep 25, 2023, at 03:04, Shawn Guo wrote:
>> + Arnd
>>
>> On Tue, Aug 29, 2023 at 11:27:02AM +0200, Gregor Herburger wrote:
>>> Update file entries for TQ-Systems Layerscape modules.
>>>
>>> Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
>>> ---
>>
>> I do not have a branch for this file, so you may want to send the
>> change to Arnd directly.
>
> The MAINTAINERS files can usually go into the same branch
> as arch/arm/mach-*/ and arch/arm64/Kconfig changes. If you have
> nothing for that, merging this one along with the corresponding
> arch/arm64/boot/dts changes is also fine.
>
> We used to have a separate branch just for the maintainer
> file updates a long time ago, but they rarely cause conflicts.
>
> Whichever way you end up doing it, please ensure that the person
> sending the pull request or patch addresses it to:soc@kernel.org
> cc:linux-arm-kernel@lists.infradead.org to make it end up in
> patchwork, otherwise I'm more likely to miss it or expect that
> I'll get it as part of the normal pull requests.
Plus, there is no really reason to split such trivial maintainer change
into separate commit.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 11+ messages in thread