From: Conor Dooley <conor@kernel.org>
To: Alain Volmat <alain.volmat@foss.st.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Andrey Skvortsov <andrej.skvortzov@gmail.com>,
Rob Herring <robh@kernel.org>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: media: i2c: add galaxycore,gc2145 dt-bindings
Date: Tue, 26 Sep 2023 14:32:12 +0100 [thread overview]
Message-ID: <20230926-skyline-absolute-a563a42b1220@spud> (raw)
In-Reply-To: <20230926092825.819229-2-alain.volmat@foss.st.com>
[-- Attachment #1: Type: text/plain, Size: 4754 bytes --]
Hey Alain,
On Tue, Sep 26, 2023 at 11:28:19AM +0200, Alain Volmat wrote:
> Introduction of the Galaxy Core GC2145 XVGA CMOS camera sensor.
>
> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
> ---
> .../bindings/media/i2c/galaxycore,gc2145.yaml | 108 ++++++++++++++++++
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
AFAIU, changes to the vendor-prefixes file are done as standalone
patches.
> 2 files changed, 110 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
> new file mode 100644
> index 000000000000..e80b581498fc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Galaxy Core 1/5'' UXGA CMOS Image Sensor
> +
> +maintainers:
> + - Alain Volmat <alain.volmat@foss.st.com>
> +
> +description: |
This | seems unneeded as you have no formatting to preserve.
> + The Galaxy Core GC2145 is a high quality 2 Mega CMOS image sensor, for mobile
> + phone camera applications and digital camera products. GC2145 incorporates a
> + 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal
> + processor. It is programmable through an I2C interface. Image data is sent
> + either through a parallel interface or through MIPI CSI-2.
> +
> +allOf:
> + - $ref: ../video-interface-devices.yaml#
> +
> +properties:
> + compatible:
> + const: galaxycore,gc2145
> +
> + reg:
> + enum:
> + - 0x3c
If this is the only permitted address, this should be a const, rather
than an enum, no? Are you expecting the list to grow?
> +
> + clocks:
> + description: Reference to the xclk clock.
> + maxItems: 1
> +
> + powerdown-gpios:
> + description: GPIO descriptor for the powerdown pin.
> + maxItems: 1
> +
> + reset-gpios:
> + description: GPIO descriptor for the reset pin.
> + maxItems: 1
Where you only have a single entry, a lot of these descriptions are
superfluous.
Generally, this looks pretty good to me.
Thanks,
Conor.
> +
> + IOVDD-supply:
> + description: Power Supply for I/O circuits (1.7 - 3V).
> +
> + AVDD-supply:
> + description: Power for analog circuit/sensor array (2.7 - 3V).
> +
> + DVDD-supply:
> + description: Power for digital core (1.7 - 1.9V).
> +
> + orientation: true
> +
> + rotation: true
> +
> + port:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + required:
> + - endpoint
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - powerdown-gpios
> + - reset-gpios
> + - IOVDD-supply
> + - AVDD-supply
> + - DVDD-supply
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c5 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gc2145@3c {
> + compatible = "galaxycore,gc2145";
> + reg = <0x3c>;
> + clocks = <&clk_ext_camera>;
> + IOVDD-supply = <&scmi_v3v3_sw>;
> + AVDD-supply = <&scmi_v3v3_sw>;
> + DVDD-supply = <&scmi_v3v3_sw>;
> + powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
> + reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
> +
> + port {
> + endpoint {
> + remote-endpoint = <&mipid02_0>;
> + data-lanes = <1 2>;
> + };
> + };
> + };
> + };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 573578db9509..d9df03bba5bb 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -494,6 +494,8 @@ patternProperties:
> description: Fujitsu Ltd.
> "^fxtec,.*":
> description: FX Technology Ltd.
> + "^galaxycore,.*":
> + description: Galaxy Core Inc.
> "^gardena,.*":
> description: GARDENA GmbH
> "^gateworks,.*":
> --
> 2.25.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2023-09-26 13:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-26 9:28 [PATCH 0/2] media: i2c: gc2145: GC2145 sensor support Alain Volmat
2023-09-26 9:28 ` [PATCH 1/2] dt-bindings: media: i2c: add galaxycore,gc2145 dt-bindings Alain Volmat
2023-09-26 13:32 ` Conor Dooley [this message]
2023-09-26 18:49 ` Krzysztof Kozlowski
2023-09-26 9:28 ` [PATCH 2/2] media: i2c: gc2145: Galaxy Core GC2145 sensor support Alain Volmat
2023-09-26 16:21 ` kernel test robot
2023-09-27 13:54 ` Jacopo Mondi
2023-10-11 17:26 ` Alain Volmat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230926-skyline-absolute-a563a42b1220@spud \
--to=conor@kernel.org \
--cc=alain.volmat@foss.st.com \
--cc=andrej.skvortzov@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).