From: Keerthy <j-keerthy@ti.com>
To: <robh+dt@kernel.org>, <nm@ti.com>, <vigneshr@ti.com>,
<conor+dt@kernel.org>, <kristo@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>
Cc: <j-keerthy@ti.com>, <u-kumar1@ti.com>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v6 4/7] arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances
Date: Wed, 27 Sep 2023 08:03:54 +0530 [thread overview]
Message-ID: <20230927023357.9883-5-j-keerthy@ti.com> (raw)
In-Reply-To: <20230927023357.9883-1-j-keerthy@ti.com>
There are totally 19 instances of watchdog module. One each for the
8 A72 cores, one each for the 4 C7x cores, 1 for the GPU, 1 each
for the 6 R5F cores in the main domain. The non-A72 instances are
coupled with the R5Fs, C7x & GPU instances. Disabling them as they are
not used by Linux & will be used by their respective firmware.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 187 +++++++++++++++++++++
1 file changed, 187 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 26dc3776f911..852f4ef64fd8 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -1576,4 +1576,191 @@
<695>;
bootph-pre-ram;
};
+
+ watchdog0: watchdog@2200000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2200000 0x00 0x100>;
+ clocks = <&k3_clks 348 1>;
+ power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 348 0>;
+ assigned-clock-parents = <&k3_clks 348 4>;
+ };
+
+ watchdog1: watchdog@2210000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2210000 0x00 0x100>;
+ clocks = <&k3_clks 349 1>;
+ power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 349 0>;
+ assigned-clock-parents = <&k3_clks 349 4>;
+ };
+
+ watchdog2: watchdog@2220000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2220000 0x00 0x100>;
+ clocks = <&k3_clks 350 1>;
+ power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 350 0>;
+ assigned-clock-parents = <&k3_clks 350 4>;
+ };
+
+ watchdog3: watchdog@2230000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2230000 0x00 0x100>;
+ clocks = <&k3_clks 351 1>;
+ power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 351 0>;
+ assigned-clock-parents = <&k3_clks 351 4>;
+ };
+
+ watchdog4: watchdog@2240000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2240000 0x00 0x100>;
+ clocks = <&k3_clks 352 1>;
+ power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 352 0>;
+ assigned-clock-parents = <&k3_clks 352 4>;
+ };
+
+ watchdog5: watchdog@2250000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2250000 0x00 0x100>;
+ clocks = <&k3_clks 353 1>;
+ power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 353 0>;
+ assigned-clock-parents = <&k3_clks 353 4>;
+ };
+
+ watchdog6: watchdog@2260000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2260000 0x00 0x100>;
+ clocks = <&k3_clks 354 1>;
+ power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 354 0>;
+ assigned-clock-parents = <&k3_clks 354 4>;
+ };
+
+ watchdog7: watchdog@2270000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2270000 0x00 0x100>;
+ clocks = <&k3_clks 355 1>;
+ power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 355 0>;
+ assigned-clock-parents = <&k3_clks 355 4>;
+ };
+
+ /*
+ * The following RTI instances are coupled with MCU R5Fs, c7x and
+ * GPU so keeping them disabled as these will be used by their
+ * respective firmware
+ */
+ watchdog16: watchdog@2300000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2300000 0x00 0x100>;
+ clocks = <&k3_clks 356 1>;
+ power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 356 0>;
+ assigned-clock-parents = <&k3_clks 356 4>;
+ status = "disabled";
+ };
+
+ watchdog17: watchdog@2310000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2310000 0x00 0x100>;
+ clocks = <&k3_clks 357 1>;
+ power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 357 0>;
+ assigned-clock-parents = <&k3_clks 357 4>;
+ status = "disabled";
+ };
+
+ watchdog18: watchdog@2320000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2320000 0x00 0x100>;
+ clocks = <&k3_clks 358 1>;
+ power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 358 0>;
+ assigned-clock-parents = <&k3_clks 358 4>;
+ status = "disabled";
+ };
+
+ watchdog19: watchdog@2330000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2330000 0x00 0x100>;
+ clocks = <&k3_clks 359 1>;
+ power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 359 0>;
+ assigned-clock-parents = <&k3_clks 359 4>;
+ status = "disabled";
+ };
+
+ watchdog15: watchdog@22f0000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x22f0000 0x00 0x100>;
+ clocks = <&k3_clks 360 1>;
+ power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 360 0>;
+ assigned-clock-parents = <&k3_clks 360 4>;
+ status = "disabled";
+ };
+
+ watchdog28: watchdog@23c0000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x23c0000 0x00 0x100>;
+ clocks = <&k3_clks 361 1>;
+ power-domains = <&k3_pds 361 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 361 0>;
+ assigned-clock-parents = <&k3_clks 361 4>;
+ status = "disabled";
+ };
+
+ watchdog29: watchdog@23d0000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x23d0000 0x00 0x100>;
+ clocks = <&k3_clks 362 1>;
+ power-domains = <&k3_pds 362 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 362 0>;
+ assigned-clock-parents = <&k3_clks 362 4>;
+ status = "disabled";
+ };
+
+ watchdog30: watchdog@23e0000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x23e0000 0x00 0x100>;
+ clocks = <&k3_clks 363 1>;
+ power-domains = <&k3_pds 363 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 363 0>;
+ assigned-clock-parents = <&k3_clks 363 4>;
+ status = "disabled";
+ };
+
+ watchdog31: watchdog@23f0000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x23f0000 0x00 0x100>;
+ clocks = <&k3_clks 364 1>;
+ power-domains = <&k3_pds 364 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 364 0>;
+ assigned-clock-parents = <&k3_clks 364 4>;
+ status = "disabled";
+ };
+
+ watchdog32: watchdog@2540000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2540000 0x00 0x100>;
+ clocks = <&k3_clks 365 1>;
+ power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 365 0>;
+ assigned-clock-parents = <&k3_clks 366 4>;
+ status = "disabled";
+ };
+
+ watchdog33: watchdog@2550000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x2550000 0x00 0x100>;
+ clocks = <&k3_clks 366 1>;
+ power-domains = <&k3_pds 366 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 366 0>;
+ assigned-clock-parents = <&k3_clks 366 4>;
+ status = "disabled";
+ };
};
--
2.17.1
next prev parent reply other threads:[~2023-09-27 2:37 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-27 2:33 [PATCH v6 0/7] arm64: ti: k3-j7: Add the ESM & main domain watchdog nodes Keerthy
2023-09-27 2:33 ` [PATCH v6 1/7] arm64: dts: ti: k3-j721s2: Add ESM instances Keerthy
2023-10-03 6:50 ` Vignesh Raghavendra
2023-10-05 1:15 ` J, KEERTHY
2023-09-27 2:33 ` [PATCH v6 2/7] arm64: dts: ti: k3-j784s4: " Keerthy
2023-10-03 6:50 ` Vignesh Raghavendra
2023-10-05 1:15 ` J, KEERTHY
2023-10-05 11:15 ` Nishanth Menon
2023-10-05 12:31 ` J, KEERTHY
2023-09-27 2:33 ` [PATCH v6 3/7] arm64: dts: ti: k3-j7200: Add MCU domain ESM instance Keerthy
2023-09-27 2:33 ` Keerthy [this message]
2023-10-03 6:48 ` [PATCH v6 4/7] arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances Vignesh Raghavendra
2023-10-05 1:17 ` J, KEERTHY
2023-09-27 2:33 ` [PATCH v6 5/7] arm64: dts: ti: k3-j784s4-mcu: Add the mcu " Keerthy
2023-09-27 2:33 ` [PATCH v6 6/7] arm64: dts: ti: k3-j721s2-main: Add the main " Keerthy
2023-09-27 2:33 ` [PATCH v6 7/7] dts: ti: k3-j712s2-mcu: Add the mcu " Keerthy
2023-09-27 7:53 ` Krzysztof Kozlowski
2023-09-27 8:16 ` J, KEERTHY
2023-09-27 8:25 ` J, KEERTHY
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230927023357.9883-5-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).