From: Andreas Kemnade <andreas@kemnade.info>
To: jic23@kernel.org, lars@metafoo.de, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
bcousson@baylibre.com, tony@atomide.com, andreas@kemnade.info,
chenhuiz@axis.com, jean-baptiste.maneyrol@tdk.com,
andy.shevchenko@gmail.com, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-omap@vger.kernel.org
Subject: [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag
Date: Wed, 27 Sep 2023 19:32:44 +0200 [thread overview]
Message-ID: <20230927173245.2151083-3-andreas@kemnade.info> (raw)
In-Reply-To: <20230927173245.2151083-1-andreas@kemnade.info>
Some boards fail in magnetometer probe if level shifter flag is not set,
definition was found in the vendor Linux kernel v3.0.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c | 13 +++++++++++++
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 3 +++
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 1 +
3 files changed, 17 insertions(+)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
index 7327e5723f961..8a7f2911905af 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
@@ -71,6 +71,19 @@ int inv_mpu_aux_init(const struct inv_mpu6050_state *st)
unsigned int val;
int ret;
+ /*
+ * Code based on the vendor Linux kernel v3.0,
+ * the exact meaning is unknown.
+ */
+ if (st->chip_type == INV_MPU9150) {
+ unsigned int mask = BIT(7);
+
+ val = st->level_shifter ? mask : 0;
+ ret = regmap_update_bits(st->map, 0x1, mask, val);
+ if (ret)
+ return ret;
+ }
+
/* configure i2c master */
val = INV_MPU6050_BITS_I2C_MST_CLK_400KHZ |
INV_MPU6050_BIT_WAIT_FOR_ES;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 29f906c884bd8..3fbeef1a70186 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -17,6 +17,7 @@
#include <linux/regulator/consumer.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
+#include <linux/property.h>
#include <linux/iio/common/inv_sensors_timestamp.h>
#include <linux/iio/iio.h>
@@ -1495,6 +1496,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
st->irq = irq;
st->map = regmap;
+ st->level_shifter = device_property_read_bool(dev,
+ "invensense,level-shifter");
pdata = dev_get_platdata(dev);
if (!pdata) {
result = iio_read_mount_matrix(dev, &st->orientation);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index ed5a96e78df05..7eba1439c8093 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -203,6 +203,7 @@ struct inv_mpu6050_state {
s32 magn_raw_to_gauss[3];
struct iio_mount_matrix magn_orient;
unsigned int suspended_sensors;
+ bool level_shifter;
u8 *data;
};
--
2.39.2
next prev parent reply other threads:[~2023-09-27 17:33 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-27 17:32 [PATCH v3 0/3] ARM: omap: omap4-embt2ws: Add IMU on control unit Andreas Kemnade
2023-09-27 17:32 ` [PATCH v3 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter Andreas Kemnade
2023-09-27 19:06 ` Jean-Baptiste Maneyrol
2023-09-28 18:34 ` Rob Herring
2023-09-27 17:32 ` Andreas Kemnade [this message]
2023-09-27 19:08 ` [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag Jean-Baptiste Maneyrol
2023-09-30 16:50 ` Jonathan Cameron
2023-09-27 17:32 ` [PATCH v3 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit Andreas Kemnade
2023-10-07 6:57 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230927173245.2151083-3-andreas@kemnade.info \
--to=andreas@kemnade.info \
--cc=andy.shevchenko@gmail.com \
--cc=bcousson@baylibre.com \
--cc=chenhuiz@axis.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jean-baptiste.maneyrol@tdk.com \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).