devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Abdel Alkuor <alkuor@gmail.com>
To: heikki.krogerus@linux.intel.com,
	krzysztof.kozlowski+dt@linaro.org, bryan.odonoghue@linaro.org
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, ryan.eleceng@gmail.com,
	robh+dt@kernel.org, conor+dt@kernel.org,
	devicetree@vger.kernel.org, Abdel Alkuor <abdelalkuor@geotab.com>
Subject: [PATCH v7 10/14] USB: typec: tps6598x: Add port registration for tps25750
Date: Wed, 27 Sep 2023 13:53:44 -0400	[thread overview]
Message-ID: <20230927175348.18041-11-alkuor@gmail.com> (raw)
In-Reply-To: <20230927175348.18041-1-alkuor@gmail.com>

From: Abdel Alkuor <abdelalkuor@geotab.com>

TPS25750 doesn't have system configuration register to get dr/pr of the
current applied binary configuration.

Get data role from the device node and power role from PD status register.

Signed-off-by: Abdel Alkuor <abdelalkuor@geotab.com>
---
Changes in v7:
  - Add driver name to commit subject
Changes in v6:
  - Add port registration to tipd data factory
Changes in v5:
  - Incorporating tps25750 into tps6598x driver

 drivers/usb/typec/tipd/core.c     | 68 ++++++++++++++++++++++++++++++-
 drivers/usb/typec/tipd/tps6598x.h | 10 +++++
 2 files changed, 77 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index bd877e4cdb72..e775c3c9bf64 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -39,6 +39,7 @@
 #define TPS_REG_CTRL_CONF		0x29
 #define TPS_REG_BOOT_STATUS		0x2D
 #define TPS_REG_POWER_STATUS		0x3f
+#define TPS_REG_PD_STATUS		0x40
 #define TPS_REG_RX_IDENTITY_SOP		0x48
 #define TPS_REG_DATA_STATUS		0x5f
 
@@ -101,8 +102,11 @@ static const char *const modes[] = {
 /* Unrecognized commands will be replaced with "!CMD" */
 #define INVALID_CMD(_cmd_)		(_cmd_ == 0x444d4321)
 
+struct tps6598x;
+
 struct tipd_data {
 	irq_handler_t irq_handler;
+	int (*register_port)(struct tps6598x *tps, struct fwnode_handle *node);
 };
 
 struct tps6598x {
@@ -207,6 +211,11 @@ static inline int tps6598x_read64(struct tps6598x *tps, u8 reg, u64 *val)
 	return tps6598x_block_read(tps, reg, val, sizeof(u64));
 }
 
+static inline int tps6598x_write8(struct tps6598x *tps, u8 reg, u8 val)
+{
+	return tps6598x_block_write(tps, reg, &val, sizeof(u8));
+}
+
 static inline int tps6598x_write64(struct tps6598x *tps, u8 reg, u64 val)
 {
 	return tps6598x_block_write(tps, reg, &val, sizeof(u64));
@@ -1083,16 +1092,73 @@ tps6598x_register_port(struct tps6598x *tps, struct fwnode_handle *fwnode)
 	return 0;
 }
 
+static int
+tps25750_register_port(struct tps6598x *tps, struct fwnode_handle *fwnode)
+{
+	struct typec_capability typec_cap = { };
+	const char *data_role;
+	u8 pd_status;
+	int ret;
+
+	ret = tps6598x_read8(tps, TPS_REG_PD_STATUS, &pd_status);
+	if (ret)
+		return ret;
+
+	ret = fwnode_property_read_string(fwnode, "data-role", &data_role);
+	if (ret) {
+		dev_err(tps->dev, "data-role not found: %d\n", ret);
+		return ret;
+	}
+
+	ret = typec_find_port_data_role(data_role);
+	if (ret < 0) {
+		dev_err(tps->dev, "unknown data-role: %s\n", data_role);
+		return ret;
+	}
+
+	typec_cap.data = ret;
+	typec_cap.revision = USB_TYPEC_REV_1_3;
+	typec_cap.pd_revision = 0x300;
+	typec_cap.driver_data = tps;
+	typec_cap.ops = &tps6598x_ops;
+	typec_cap.fwnode = fwnode;
+	typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+
+	switch (TPS_PD_STATUS_PORT_TYPE(pd_status)) {
+	case TPS_PD_STATUS_PORT_TYPE_SINK_SOURCE:
+	case TPS_PD_STATUS_PORT_TYPE_SOURCE_SINK:
+		typec_cap.type = TYPEC_PORT_DRP;
+		break;
+	case TPS_PD_STATUS_PORT_TYPE_SINK:
+		typec_cap.type = TYPEC_PORT_SNK;
+		break;
+	case TPS_PD_STATUS_PORT_TYPE_SOURCE:
+		typec_cap.type = TYPEC_PORT_SRC;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	tps->port = typec_register_port(tps->dev, &typec_cap);
+	if (IS_ERR(tps->port))
+		return PTR_ERR(tps->port);
+
+	return 0;
+}
+
 static const struct tipd_data cd321x_data = {
 	.irq_handler = cd321x_interrupt,
+	.register_port = tps6598x_register_port,
 };
 
 static const struct tipd_data tps6598x_data = {
 	.irq_handler = tps6598x_interrupt,
+	.register_port = tps6598x_register_port,
 };
 
 static const struct tipd_data tps25750_data = {
 	.irq_handler = tps25750_interrupt,
+	.register_port = tps25750_register_port,
 };
 
 static int tps6598x_probe(struct i2c_client *client)
@@ -1195,7 +1261,7 @@ static int tps6598x_probe(struct i2c_client *client)
 	if (ret)
 		goto err_role_put;
 
-	ret = tps6598x_register_port(tps, fwnode);
+	ret = tps->cb.register_port(tps, fwnode);
 	if (ret)
 		goto err_role_put;
 
diff --git a/drivers/usb/typec/tipd/tps6598x.h b/drivers/usb/typec/tipd/tps6598x.h
index c000170f4547..3a9a43394134 100644
--- a/drivers/usb/typec/tipd/tps6598x.h
+++ b/drivers/usb/typec/tipd/tps6598x.h
@@ -203,4 +203,14 @@
 #define TPS_BOOT_STATUS_DEAD_BATTERY_FLAG	BIT(2)
 #define TPS_BOOT_STATUS_I2C_EEPROM_PRESENT	BIT(3)
 
+/* PD STATUS REG */
+#define TPS_REG_PD_STATUS_PORT_TYPE_MASK	GENMASK(5, 4)
+#define TPS_PD_STATUS_PORT_TYPE(x) \
+	TPS_FIELD_GET(TPS_REG_PD_STATUS_PORT_TYPE_MASK, x)
+
+#define TPS_PD_STATUS_PORT_TYPE_SINK_SOURCE	0
+#define TPS_PD_STATUS_PORT_TYPE_SINK		1
+#define TPS_PD_STATUS_PORT_TYPE_SOURCE		2
+#define TPS_PD_STATUS_PORT_TYPE_SOURCE_SINK	3
+
 #endif /* __TPS6598X_H__ */
-- 
2.34.1


  parent reply	other threads:[~2023-09-27 17:57 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-27 17:53 [PATCH v7 00/14] Add TPS25750 USB type-C PD controller support Abdel Alkuor
2023-09-27 17:53 ` [PATCH v7 01/14] dt-bindings: usb: tps6598x: Add tps25750 Abdel Alkuor
2023-09-28  5:37   ` Krzysztof Kozlowski
2023-09-28  8:06     ` Abdel Alkuor
2023-09-27 17:53 ` [PATCH v7 02/14] USB: typec: tsp6598x: Add cmd timeout and response delay Abdel Alkuor
2023-09-29  8:52   ` Heikki Krogerus
2023-09-27 17:53 ` [PATCH v7 03/14] USB: typec: tps6598x: Add patch mode to tps6598x Abdel Alkuor
2023-09-29 10:11   ` Heikki Krogerus
2023-09-27 17:53 ` [PATCH v7 04/14] USB: typec: tps6598x: Load TPS25750 patch bundle Abdel Alkuor
2023-09-29 10:29   ` Heikki Krogerus
2023-09-27 17:53 ` [PATCH v7 05/14] USB: typec: tps6598x: Check for EEPROM present Abdel Alkuor
2023-09-27 17:53 ` [PATCH v7 06/14] USB: typec: tps6598x: Clear dead battery flag Abdel Alkuor
2023-09-27 17:53 ` [PATCH v7 07/14] USB: typec: tps6598x: Apply patch again after power resume Abdel Alkuor
2023-09-27 17:53 ` [PATCH v7 08/14] USB: typec: tps6598x: Add interrupt support for TPS25750 Abdel Alkuor
2023-09-29 10:43   ` Heikki Krogerus
2023-09-27 17:53 ` [PATCH v7 09/14] USB: typec: tps6598x: Refactor tps6598x port registration Abdel Alkuor
2023-09-27 17:53 ` Abdel Alkuor [this message]
2023-09-27 17:53 ` [PATCH v7 11/14] USB: typec: tps6598x: Enable sleep mode for tps25750 Abdel Alkuor
2023-09-27 17:53 ` [PATCH v7 12/14] USB: typec: tps6598x: Add trace for tps25750 irq Abdel Alkuor
2023-09-27 17:53 ` [PATCH v7 13/14] USB: typec: tps6598x: Add power status trace for tps25750 Abdel Alkuor
2023-09-27 17:53 ` [PATCH v7 14/14] USB: typec: tps6598x: Add " Abdel Alkuor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230927175348.18041-11-alkuor@gmail.com \
    --to=alkuor@gmail.com \
    --cc=abdelalkuor@geotab.com \
    --cc=bryan.odonoghue@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=ryan.eleceng@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).