[PATCH v6 20/36] ARM: dts: qcom: pm8058: reorder nodes

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Move pm8058 device nodes to follow the alphanumberic sorting order.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom/pm8058.dtsi | 90 +++++++++++++++---------------
 1 file changed, 45 insertions(+), 45 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi
index ad581c3bcbd2..913a511719fa 100644
--- a/arch/arm/boot/dts/qcom/pm8058.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8058.dtsi
@@ -8,15 +8,24 @@ pm8058: pmic {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pm8058_gpio: gpio@150 {
-			compatible = "qcom,pm8058-gpio",
-				     "qcom,ssbi-gpio";
-			reg = <0x150>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pm8058_gpio 0 0 44>;
-			#gpio-cells = <2>;
+		pwrkey@1c {
+			compatible = "qcom,pm8058-pwrkey";
+			reg = <0x1c>;
+			interrupt-parent = <&pm8058>;
+			interrupts = <50 1>, <51 1>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8058_led48: led@48 {
+			compatible = "qcom,pm8058-keypad-led";
+			reg = <0x48>;
+			status = "disabled";
+		};
+
+		vibrator@4a {
+			compatible = "qcom,pm8058-vib";
+			reg = <0x4a>;
 		};
 
 		pm8058_mpps: mpps@50 {
@@ -30,13 +39,22 @@ pm8058_mpps: mpps@50 {
 			#interrupt-cells = <2>;
 		};
 
-		pwrkey@1c {
-			compatible = "qcom,pm8058-pwrkey";
-			reg = <0x1c>;
-			interrupt-parent = <&pm8058>;
-			interrupts = <50 1>, <51 1>;
-			debounce = <15625>;
-			pull-up;
+		pm8058_led131: led@131 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x131>;
+			status = "disabled";
+		};
+
+		pm8058_led132: led@132 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x132>;
+			status = "disabled";
+		};
+
+		pm8058_led133: led@133 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x133>;
+			status = "disabled";
 		};
 
 		pm8058_keypad: keypad@148 {
@@ -49,6 +67,17 @@ pm8058_keypad: keypad@148 {
 			row-hold = <91500>;
 		};
 
+		pm8058_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8058_gpio 0 0 44>;
+			#gpio-cells = <2>;
+		};
+
 		pm8058_xoadc: xoadc@197 {
 			compatible = "qcom,pm8058-adc";
 			reg = <0x197>;
@@ -109,35 +138,6 @@ rtc@1e8 {
 			interrupts = <39 1>;
 			allow-set-time;
 		};
-
-		vibrator@4a {
-			compatible = "qcom,pm8058-vib";
-			reg = <0x4a>;
-		};
-
-		pm8058_led48: led@48 {
-			compatible = "qcom,pm8058-keypad-led";
-			reg = <0x48>;
-			status = "disabled";
-		};
-
-		pm8058_led131: led@131 {
-			compatible = "qcom,pm8058-led";
-			reg = <0x131>;
-			status = "disabled";
-		};
-
-		pm8058_led132: led@132 {
-			compatible = "qcom,pm8058-led";
-			reg = <0x132>;
-			status = "disabled";
-		};
-
-		pm8058_led133: led@133 {
-			compatible = "qcom,pm8058-led";
-			reg = <0x133>;
-			status = "disabled";
-		};
 	};
 };
 
-- 
2.39.2