From: Christophe Roullier <christophe.roullier@foss.st.com>
To: "David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Richard Cochran <richardcochran@gmail.com>,
Jose Abreu <joabreu@synopsys.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Christophe Roullier <christophe.roullier@foss.st.com>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 09/12] ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
Date: Thu, 28 Sep 2023 14:24:24 +0200 [thread overview]
Message-ID: <20230928122427.313271-10-christophe.roullier@foss.st.com> (raw)
In-Reply-To: <20230928122427.313271-1-christophe.roullier@foss.st.com>
Both instances ethernet based on GMAC SNPS IP on stm32mp13.
GMAC IP version is SNPS 4.20.
STM32MP13 is STM32 SOC with 2 GMACs instances.
GMAC IP configure with 1 RX and 1 TX queue.
DMA HW capability register supported
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
TSO supported
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
arch/arm/boot/dts/st/stm32mp131.dtsi | 31 ++++++++++++++++++++++++++++
arch/arm/boot/dts/st/stm32mp133.dtsi | 30 +++++++++++++++++++++++++++
2 files changed, 61 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index ac90fcbf0c091..d8339eea05d53 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -1296,6 +1296,37 @@ sdmmc2: mmc@58007000 {
status = "disabled";
};
+ ethernet1: ethernet@5800a000 {
+ compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800a000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 68 1>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "ethstp",
+ "eth-ck";
+ clocks = <&rcc ETH1MAC>,
+ <&rcc ETH1TX>,
+ <&rcc ETH1RX>,
+ <&rcc ETH1STP>,
+ <&rcc ETH1CK_K>;
+ st,syscon = <&syscfg 0x4 0xff0000>;
+ snps,mixed-burst;
+ snps,pbl = <2>;
+ snps,axi-config = <&stmmac_axi_config_1>;
+ snps,tso;
+ status = "disabled";
+
+ stmmac_axi_config_1: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+ };
+
usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
index df451c3c2a26d..aee855cd2f36b 100644
--- a/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -64,5 +64,35 @@ channel@18 {
};
};
};
+
+ ethernet2: ethernet@5800e000 {
+ compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800e000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts-extended = <&intc GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "ethstp",
+ "eth-ck";
+ clocks = <&rcc ETH2MAC>,
+ <&rcc ETH2TX>,
+ <&rcc ETH2RX>,
+ <&rcc ETH2STP>,
+ <&rcc ETH2CK_K>;
+ st,syscon = <&syscfg 0x4 0xff000000>;
+ snps,mixed-burst;
+ snps,pbl = <2>;
+ snps,axi-config = <&stmmac_axi_config_2>;
+ snps,tso;
+ status = "disabled";
+
+ stmmac_axi_config_2: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+ };
};
};
--
2.25.1
next prev parent reply other threads:[~2023-09-28 12:26 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-28 12:24 [PATCH v2 00/12] Series to deliver Ethernets for STM32MP13 Christophe Roullier
2023-09-28 12:24 ` [PATCH v2 01/12] dt-bindings: net: add STM32MP13 compatible in documentation for stm32 Christophe Roullier
2023-09-28 12:24 ` [PATCH v2 02/12] dt-bindings: net: add new property st,ext-phyclk " Christophe Roullier
2023-09-28 14:47 ` Rob Herring
2023-09-28 15:23 ` Rob Herring
2023-09-28 12:24 ` [PATCH v2 03/12] dt-bindings: net: add phy-supply property " Christophe Roullier
2023-09-28 12:24 ` [PATCH v2 04/12] net: ethernet: stmmac: rework glue to simplify management for next stm32 Christophe Roullier
2023-09-28 12:24 ` [PATCH v2 05/12] net: ethernet: stmmac: add management of stm32mp13 for stm32 Christophe Roullier
2023-09-28 12:24 ` [PATCH v2 06/12] net: ethernet: stmmac: stm32: update config management for phy wo cristal Christophe Roullier
2023-09-28 12:24 ` [PATCH v2 07/12] net: ethernet: stm32: clean the way to manage wol irqwake Christophe Roullier
2023-09-28 12:24 ` [PATCH v2 08/12] net: ethernet: stmmac: stm32: support the phy-supply regulator binding Christophe Roullier
2023-09-28 17:53 ` Andrew Lunn
2023-10-05 11:21 ` Christophe ROULLIER
2023-09-28 12:24 ` Christophe Roullier [this message]
2023-09-28 12:24 ` [PATCH v2 10/12] ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board Christophe Roullier
2023-09-28 12:24 ` [PATCH v2 11/12] ARM: dts: stm32: add ethernet1 and ethernet2 for STM32MP135F-DK board Christophe Roullier
2023-09-28 12:24 ` [PATCH v2 12/12] ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support Christophe Roullier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230928122427.313271-10-christophe.roullier@foss.st.com \
--to=christophe.roullier@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).