[PATCH v2 02/12] dt-bindings: net: add new property st,ext-phyclk in documentation for stm32

[Christophe Roullier <christophe.roullier@foss.st.com>]

Add property st,ext-phyclk to manage cases when PHY have no cristal/quartz
This property can be used with RMII phy without cristal 50Mhz and when we
want to select RCC clock instead of ETH_REF_CLK
Can be used also with RGMII phy with no cristal and we select RCC clock
instead of ETH_CLK125
This new property replace st,eth-clk-sel and st,eth-ref-clk-sel

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index ca976281bfc22..54fda8b052abc 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -78,12 +78,21 @@ properties:
       encompases the glue register, the offset of the control register and
       the mask to set bitfield in control register
 
+  st,ext-phyclk:
+     description:
+      set this property in RMII mode when you have PHY without crystal 50MHz and want to
+      select RCC clock instead of ETH_REF_CLK. or in RGMII mode when you want to select
+      RCC clock instead of ETH_CLK125.
+    type: boolean
+
   st,eth-clk-sel:
+    deprecated: true
     description:
       set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
     type: boolean
 
   st,eth-ref-clk-sel:
+    deprecated: true
     description:
       set this property in RMII mode when you have PHY without crystal 50MHz and want to
       select RCC clock instead of ETH_REF_CLK.
-- 
2.25.1