[PATCH v3 0/2] PCI: mediatek-gen3: Support controlling power supplies

[PATCH v3 0/2] PCI: mediatek-gen3: Support controlling power supplies

[Jian Yang]

These series patches is based on linux-next, tag: next-20230921.
Add support for controlling power supplies and reset GPIO of a downstream
component in Mediatek's PCIe GEN3 controller driver.

Changes in v3:
1. Modify description of power supply properties in DT binding.
2. Remove unused header files.
3. Use 'device_wakeup_path' to determine whether the downstream component
needs to skip the reset process in system suspend scenarios.

jian.yang (2):
  dt-bindings: PCI: mediatek-gen3: Add support for controlling power and
    reset
  PCI: mediatek-gen3: Add power and reset control feature for downstream
    component

 .../bindings/pci/mediatek-pcie-gen3.yaml      | 25 +++++
 drivers/pci/controller/pcie-mediatek-gen3.c   | 93 ++++++++++++++++++-
 2 files changed, 117 insertions(+), 1 deletion(-)

-- 
2.18.0

[PATCH v3 1/2] dt-bindings: PCI: mediatek-gen3: Add support for controlling power and reset

[Jian Yang]

From: "jian.yang" <jian.yang@mediatek.com>

Add new properties to support control power supplies and reset pin of
a downstream component.

Signed-off-by: jian.yang <jian.yang@mediatek.com>
---
 .../bindings/pci/mediatek-pcie-gen3.yaml      | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
index 7e8c7a2a5f9b..32031362db58 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -84,6 +84,26 @@ properties:
     items:
       enum: [ phy, mac ]
 
+  pcie1v8-supply:
+    description:
+      The regulator phandle that provides 1.8V power from root port to a
+      downstream component.
+
+  pcie3v3-supply:
+    description:
+      The regulator phandle that provides 3.3V power from root port to a
+      downstream component.
+
+  pcie12v-supply:
+    description:
+      The regulator phandle that provides 12V power from root port to a
+      downstream component.
+
+  dsc-reset-gpios:
+    description:
+      The extra reset pin other than PERST# required by a downstream component.
+    maxItems: 1
+
   clocks:
     minItems: 4
     maxItems: 6
@@ -238,5 +258,10 @@ examples:
                       #interrupt-cells = <1>;
                       interrupt-controller;
             };
+
+            pcie@0 {
+              device_type = "pci";
+              pcie-3v3-supply = <&pcie3v3_regulator>;
+            };
         };
     };
-- 
2.18.0

Re: [PATCH v3 1/2] dt-bindings: PCI: mediatek-gen3: Add support for controlling power and reset

[Rob Herring]

On Thu, 28 Sep 2023 18:58:20 +0800, Jian Yang wrote:
> From: "jian.yang" <jian.yang@mediatek.com>
> 
> Add new properties to support control power supplies and reset pin of
> a downstream component.
> 
> Signed-off-by: jian.yang <jian.yang@mediatek.com>
> ---
>  .../bindings/pci/mediatek-pcie-gen3.yaml      | 25 +++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dts:72.24-75.19: Warning (unit_address_vs_reg): /example-0/bus/pcie@11230000/pcie@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dts:72.24-75.19: Warning (pci_bridge): /example-0/bus/pcie@11230000/pcie@0: missing ranges for PCI bridge (or not a bridge)
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dts:72.24-75.19: Warning (pci_bridge): /example-0/bus/pcie@11230000/pcie@0: incorrect #address-cells for PCI bridge
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dts:72.24-75.19: Warning (pci_bridge): /example-0/bus/pcie@11230000/pcie@0: incorrect #size-cells for PCI bridge
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@11230000: pcie@0: 'reg' is a required property
	from schema $id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@11230000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'bus-range', 'device_type', 'interrupt-map', 'interrupt-map-mask', 'pcie@0' were unexpected)
	from schema $id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@11230000: pcie@0: 'reg' is a required property
	from schema $id: http://devicetree.org/schemas/pci/pci-bus.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@0: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/pci/pci-bus.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@0: 'reg' is a required property
	from schema $id: http://devicetree.org/schemas/pci/pci-bus.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@0: '#address-cells' is a required property
	from schema $id: http://devicetree.org/schemas/pci/pci-bus.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@0: '#size-cells' is a required property
	from schema $id: http://devicetree.org/schemas/pci/pci-bus.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230928105819.5161-2-jian.yang@mediatek.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v3 1/2] dt-bindings: PCI: mediatek-gen3: Add support for controlling power and reset

[Rob Herring]

On Thu, Sep 28, 2023 at 06:58:20PM +0800, Jian Yang wrote:
> From: "jian.yang" <jian.yang@mediatek.com>
> 
> Add new properties to support control power supplies and reset pin of
> a downstream component.
> 
> Signed-off-by: jian.yang <jian.yang@mediatek.com>
> ---
>  .../bindings/pci/mediatek-pcie-gen3.yaml      | 25 +++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> index 7e8c7a2a5f9b..32031362db58 100644
> --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> @@ -84,6 +84,26 @@ properties:
>      items:
>        enum: [ phy, mac ]
>  
> +  pcie1v8-supply:
> +    description:
> +      The regulator phandle that provides 1.8V power from root port to a
> +      downstream component.
> +
> +  pcie3v3-supply:
> +    description:
> +      The regulator phandle that provides 3.3V power from root port to a
> +      downstream component.
> +
> +  pcie12v-supply:
> +    description:
> +      The regulator phandle that provides 12V power from root port to a
> +      downstream component.
> +
> +  dsc-reset-gpios:

This should be in the downstream component if it is something extra. So 
not the root port node, but the next one down. 

> +    description:
> +      The extra reset pin other than PERST# required by a downstream component.
> +    maxItems: 1
> +
>    clocks:
>      minItems: 4
>      maxItems: 6
> @@ -238,5 +258,10 @@ examples:
>                        #interrupt-cells = <1>;
>                        interrupt-controller;
>              };
> +
> +            pcie@0 {

Missing 'reg'.

> +              device_type = "pci";
> +              pcie-3v3-supply = <&pcie3v3_regulator>;

This is in the root port (which is good), but you've defined the schema 
to put them in the host bridge node. IOW, these need to go in a PCI 
root-port or P2P bridge schema which doesn't yet exist. I have an 
inprogress branch for dtschema to split up pci-bus.yaml for that 
purpose. Will try to finish it up soon.

Rob

[PATCH v3 2/2] PCI: mediatek-gen3: Add power and reset control feature for downstream component

[Jian Yang]

From: "jian.yang" <jian.yang@mediatek.com>

Make MediaTek's controller driver capable of controlling power
supplies and reset pin of a downstream component in power-on and
power-off flow.

Some downstream components (e.g., a WIFI chip) may need an extra
reset pin other than PERST# and their power supplies, depending on
the requirements of platform, may need to controlled by their
parent's driver. To meet the requirements described above, I add this
feature to MediaTek's PCIe controller driver as an optional feature.

Signed-off-by: jian.yang <jian.yang@mediatek.com>
---
 drivers/pci/controller/pcie-mediatek-gen3.c | 93 ++++++++++++++++++++-
 1 file changed, 92 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index e0e27645fdf4..ad4b25c34f5d 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -8,6 +8,7 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/iopoll.h>
 #include <linux/irq.h>
 #include <linux/irqchip/chained_irq.h>
@@ -20,6 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_wakeup.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 
 #include "../pci.h"
@@ -100,6 +103,13 @@
 #define PCIE_ATR_TLP_TYPE_MEM		PCIE_ATR_TLP_TYPE(0)
 #define PCIE_ATR_TLP_TYPE_IO		PCIE_ATR_TLP_TYPE(2)
 
+/* Downstream Component power supplies used by MediaTek PCIe */
+static const char *const dsc_power_supplies[] = {
+	"pcie1v8",
+	"pcie3v3",
+	"pcie12v",
+};
+
 /**
  * struct mtk_msi_set - MSI information for each set
  * @base: IO mapped register base
@@ -122,6 +132,9 @@ struct mtk_msi_set {
  * @phy: PHY controller block
  * @clks: PCIe clocks
  * @num_clks: PCIe clocks count for this port
+ * @supplies: Downstream Component power supplies
+ * @num_supplies: Downstream Component power supplies count
+ * @dsc_reset: The GPIO pin to reset Downstream component
  * @irq: PCIe controller interrupt number
  * @saved_irq_state: IRQ enable state saved at suspend time
  * @irq_lock: lock protecting IRQ register access
@@ -141,6 +154,9 @@ struct mtk_gen3_pcie {
 	struct phy *phy;
 	struct clk_bulk_data *clks;
 	int num_clks;
+	struct regulator_bulk_data *supplies;
+	int num_supplies;
+	struct gpio_desc *dsc_reset;
 
 	int irq;
 	u32 saved_irq_state;
@@ -763,7 +779,7 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)
 	struct device *dev = pcie->dev;
 	struct platform_device *pdev = to_platform_device(dev);
 	struct resource *regs;
-	int ret;
+	int ret, i;
 
 	regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcie-mac");
 	if (!regs)
@@ -809,14 +825,86 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)
 		return pcie->num_clks;
 	}
 
+	pcie->num_supplies = ARRAY_SIZE(dsc_power_supplies);
+	pcie->supplies = devm_kcalloc(dev, pcie->num_supplies,
+				      sizeof(*pcie->supplies),
+				      GFP_KERNEL);
+	if (!pcie->supplies)
+		return -ENOMEM;
+
+	for (i = 0; i < pcie->num_supplies; i++)
+		pcie->supplies[i].supply = dsc_power_supplies[i];
+
+	ret = devm_regulator_bulk_get(dev, pcie->num_supplies, pcie->supplies);
+	if (ret)
+		return ret;
+
+	pcie->dsc_reset = devm_gpiod_get_optional(dev, "dsc-reset",
+						  GPIOD_OUT_LOW);
+	if (IS_ERR(pcie->dsc_reset)) {
+		ret = PTR_ERR(pcie->dsc_reset);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to request DSC reset gpio\n");
+
+		return ret;
+	}
+
 	return 0;
 }
 
+static int mtk_pcie_dsc_power_up(struct mtk_gen3_pcie *pcie)
+{
+	struct device *dev = pcie->dev;
+	int ret;
+
+	/*
+	 * Skip downstream component's power-up flow if it was kept power-on
+	 * while system entered suspend state
+	 */
+	if (device_wakeup_path(dev))
+		return 0;
+
+	/* Assert Downstream Component reset */
+	if (pcie->dsc_reset)
+		gpiod_set_value_cansleep(pcie->dsc_reset, 1);
+
+	ret = regulator_bulk_enable(pcie->num_supplies, pcie->supplies);
+	if (ret)
+		dev_err(dev, "failed to enable DSC power supplies: %d\n", ret);
+
+	/* De-assert Downstream Component reset */
+	if (pcie->dsc_reset)
+		gpiod_set_value_cansleep(pcie->dsc_reset, 0);
+
+	return ret;
+}
+
+static void mtk_pcie_dsc_power_down(struct mtk_gen3_pcie *pcie)
+{
+	/*
+	 * Keep downstream component power-on if it need to wake up the
+	 * system in suspend state
+	 */
+	if (device_wakeup_path(pcie->dev))
+		return;
+
+	/* Assert Downstream Component reset */
+	if (pcie->dsc_reset)
+		gpiod_set_value_cansleep(pcie->dsc_reset, 1);
+
+	regulator_bulk_disable(pcie->num_supplies, pcie->supplies);
+}
+
 static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
 	int err;
 
+	/* Downstream Component power up before RC */
+	err = mtk_pcie_dsc_power_up(pcie);
+	if (err)
+		return err;
+
 	/* PHY power on and enable pipe clock */
 	reset_control_deassert(pcie->phy_reset);
 
@@ -855,6 +943,7 @@ static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)
 	phy_exit(pcie->phy);
 err_phy_init:
 	reset_control_assert(pcie->phy_reset);
+	mtk_pcie_dsc_power_down(pcie);
 
 	return err;
 }
@@ -870,6 +959,8 @@ static void mtk_pcie_power_down(struct mtk_gen3_pcie *pcie)
 	phy_power_off(pcie->phy);
 	phy_exit(pcie->phy);
 	reset_control_assert(pcie->phy_reset);
+
+	mtk_pcie_dsc_power_down(pcie);
 }
 
 static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie)
-- 
2.18.0

[PATCH v3 0/2] PCI: mediatek-gen3: Support controlling power supplies

[Jian Yang]

These series patches is based on linux-next, tag: next-20231009.
Add support for controlling power supplies and reset GPIO of a downstream
component in Mediatek's PCIe GEN3 controller driver.

Changes in v3:
1. Modify description of power supply properties in DT binding.
2. Remove unused header files.
3. Use 'device_wakeup_path' to determine whether the downstream component
needs to skip the reset process in system suspend scenarios.

jian.yang (2):
  dt-bindings: PCI: mediatek-gen3: Add support for controlling power and
    reset
  PCI: mediatek-gen3: Add power and reset control feature for downstream
    component

 .../bindings/pci/mediatek-pcie-gen3.yaml      | 30 ++++++
 drivers/pci/controller/pcie-mediatek-gen3.c   | 93 ++++++++++++++++++-
 2 files changed, 122 insertions(+), 1 deletion(-)

-- 
2.18.0

[PATCH v3 1/2] dt-bindings: PCI: mediatek-gen3: Add support for controlling power and reset

[Jian Yang]

From: "jian.yang" <jian.yang@mediatek.com>

Add new properties to support control power supplies and reset pin of
a downstream component.

Signed-off-by: jian.yang <jian.yang@mediatek.com>
---
 .../bindings/pci/mediatek-pcie-gen3.yaml      | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
index 7e8c7a2a5f9b..eb4ad98549d1 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -84,6 +84,26 @@ properties:
     items:
       enum: [ phy, mac ]
 
+  pcie1v8-supply:
+    description:
+      The regulator phandle that provides 1.8V power from root port to a
+      downstream component.
+
+  pcie3v3-supply:
+    description:
+      The regulator phandle that provides 3.3V power from root port to a
+      downstream component.
+
+  pcie12v-supply:
+    description:
+      The regulator phandle that provides 12V power from root port to a
+      downstream component.
+
+  dsc-reset-gpios:
+    description:
+      The extra reset pin other than PERST# required by a downstream component.
+    maxItems: 1
+
   clocks:
     minItems: 4
     maxItems: 6
@@ -238,5 +258,15 @@ examples:
                       #interrupt-cells = <1>;
                       interrupt-controller;
             };
+
+            pcie@0 {
+                device_type = "pci";
+                reg = <0x0 0x0 0x0 0x0 0x0>;
+                pcie-3v3-supply = <&pcie3v3_regulator>;
+
+                #address-cells = <3>;
+                #size-cells = <2>;
+                ranges;
+            };
         };
     };
-- 
2.18.0

Re: [PATCH v3 1/2] dt-bindings: PCI: mediatek-gen3: Add support for controlling power and reset

[AngeloGioacchino Del Regno]

Il 09/10/23 10:49, Jian Yang ha scritto:
> From: "jian.yang" <jian.yang@mediatek.com>
> 
> Add new properties to support control power supplies and reset pin of
> a downstream component.
> 
> Signed-off-by: jian.yang <jian.yang@mediatek.com>
> ---
>   .../bindings/pci/mediatek-pcie-gen3.yaml      | 30 +++++++++++++++++++
>   1 file changed, 30 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> index 7e8c7a2a5f9b..eb4ad98549d1 100644
> --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> @@ -84,6 +84,26 @@ properties:
>       items:
>         enum: [ phy, mac ]
>   
> +  pcie1v8-supply:

There are another two controllers having such regulators and they all have the
same name for those supplies; Can you please change the names to be consistent
with the other controllers?

vpcie1v8
vpcie3v3
vpcie12v

Regards,
Angelo

Re: [PATCH v3 1/2] dt-bindings: PCI: mediatek-gen3: Add support for controlling power and reset

[Jian Yang (杨戬)]

Hi Angelo,

Thanks for your comment.

On Tue, 2023-10-10 at 11:45 +0200, AngeloGioacchino Del Regno wrote:
> Il 09/10/23 10:49, Jian Yang ha scritto:
> > From: "jian.yang" <jian.yang@mediatek.com>
> > 
> > Add new properties to support control power supplies and reset pin
> > of
> > a downstream component.
> > 
> > Signed-off-by: jian.yang <jian.yang@mediatek.com>
> > ---
> >   .../bindings/pci/mediatek-pcie-gen3.yaml      | 30
> > +++++++++++++++++++
> >   1 file changed, 30 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-
> > gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-
> > gen3.yaml
> > index 7e8c7a2a5f9b..eb4ad98549d1 100644
> > --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> > @@ -84,6 +84,26 @@ properties:
> >       items:
> >         enum: [ phy, mac ]
> >   
> > +  pcie1v8-supply:
> 
> There are another two controllers having such regulators and they all
> have the
> same name for those supplies; Can you please change the names to be
> consistent
> with the other controllers?
> 
> vpcie1v8
> vpcie3v3
> vpcie12v
> 
I will rename them in next patch version.

> Regards,
> Angelo
> 
> 
Best regards,
Jian Yang