From: Christophe Roullier <christophe.roullier@foss.st.com>
To: "David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Richard Cochran <richardcochran@gmail.com>,
Jose Abreu <joabreu@synopsys.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Christophe Roullier <christophe.roullier@foss.st.com>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 06/12] net: ethernet: stmmac: stm32: update config management for phy wo cristal
Date: Thu, 28 Sep 2023 17:15:06 +0200 [thread overview]
Message-ID: <20230928151512.322016-7-christophe.roullier@foss.st.com> (raw)
In-Reply-To: <20230928151512.322016-1-christophe.roullier@foss.st.com>
From: Christophe Roullier <christophe.roullier@st.com>
Some cleaning because some Ethernet PHY configs do not need to add st,ext-phyclk property
Change print info message "No phy clock provided" only when debug
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 27 ++++++++++---------
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index a071dc6ffc95b..1210062f0832a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -55,17 +55,17 @@
*| | | 25MHz | 50MHz | |
* ---------------------------------------------------------------------------
*| MII | - | eth-ck | n/a | n/a |
- *| | | st,ext-phyclk | | |
+ *| | | | | |
* ---------------------------------------------------------------------------
*| GMII | - | eth-ck | n/a | n/a |
- *| | | st,ext-phyclk | | |
+ *| | | | | |
* ---------------------------------------------------------------------------
*| RGMII | - | eth-ck | n/a | eth-ck |
- *| | | st,ext-phyclk | | st,eth-clk-sel or|
+ *| | | | | st,eth-clk-sel or|
*| | | | | st,ext-phyclk |
* ---------------------------------------------------------------------------
*| RMII | - | eth-ck | eth-ck | n/a |
- *| | | st,ext-phyclk | st,eth-ref-clk-sel | |
+ *| | | | st,eth-ref-clk-sel | |
*| | | | or st,ext-phyclk | |
* ---------------------------------------------------------------------------
*
@@ -180,23 +180,22 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
dwmac->enable_eth_ck = false;
switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_MII:
- if (clk_rate == ETH_CK_F_25M && dwmac->ext_phyclk)
+ if (clk_rate == ETH_CK_F_25M)
dwmac->enable_eth_ck = true;
val = dwmac->ops->pmcsetr.eth1_selmii;
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
break;
case PHY_INTERFACE_MODE_GMII:
val = SYSCFG_PMCR_ETH_SEL_GMII;
- if (clk_rate == ETH_CK_F_25M &&
- (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
+ if (clk_rate == ETH_CK_F_25M)
dwmac->enable_eth_ck = true;
- val |= dwmac->ops->pmcsetr.eth1_clk_sel;
- }
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_GMII\n");
break;
case PHY_INTERFACE_MODE_RMII:
val = dwmac->ops->pmcsetr.eth1_sel_rmii | dwmac->ops->pmcsetr.eth2_sel_rmii;
- if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_50M) &&
+ if (clk_rate == ETH_CK_F_25M)
+ dwmac->enable_eth_ck = true;
+ if ((clk_rate == ETH_CK_F_50M) &&
(dwmac->eth_ref_clk_sel_reg || dwmac->ext_phyclk)) {
dwmac->enable_eth_ck = true;
val |= dwmac->ops->pmcsetr.eth1_ref_clk_sel;
@@ -209,7 +208,9 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
val = dwmac->ops->pmcsetr.eth1_sel_rgmii | dwmac->ops->pmcsetr.eth2_sel_rgmii;
- if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_125M) &&
+ if (clk_rate == ETH_CK_F_25M)
+ dwmac->enable_eth_ck = true;
+ if ((clk_rate == ETH_CK_F_125M) &&
(dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
dwmac->enable_eth_ck = true;
val |= dwmac->ops->pmcsetr.eth1_clk_sel;
@@ -225,7 +226,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
}
/* Need to update PMCCLRR (clear register) */
- regmap_write(dwmac->regmap, reg + dwmac->ops->syscfg_clr_off,
+ regmap_write(dwmac->regmap, dwmac->ops->syscfg_clr_off,
dwmac->mode_mask);
/* Update PMCSETR (set register) */
@@ -332,7 +333,7 @@ static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
/* Get ETH_CLK clocks */
dwmac->clk_eth_ck = devm_clk_get(dev, "eth-ck");
if (IS_ERR(dwmac->clk_eth_ck)) {
- dev_info(dev, "No phy clock provided...\n");
+ dev_dbg(dev, "No phy clock provided...\n");
dwmac->clk_eth_ck = NULL;
}
--
2.25.1
next prev parent reply other threads:[~2023-09-28 15:17 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-28 15:15 [PATCH v3 00/12] Series to deliver Ethernets for STM32MP13 Christophe Roullier
2023-09-28 15:15 ` [PATCH v3 01/12] dt-bindings: net: add STM32MP13 compatible in documentation for stm32 Christophe Roullier
2023-09-28 20:39 ` Conor Dooley
2023-09-30 15:46 ` Krzysztof Kozlowski
2023-09-28 15:15 ` [PATCH v3 02/12] dt-bindings: net: add new property st,ext-phyclk " Christophe Roullier
2023-09-28 17:17 ` Conor Dooley
2023-10-05 9:03 ` Christophe ROULLIER
2023-10-06 9:30 ` Conor Dooley
2023-09-28 15:15 ` [PATCH v3 03/12] dt-bindings: net: add phy-supply property " Christophe Roullier
2023-09-28 17:14 ` Conor Dooley
2023-09-28 15:15 ` [PATCH v3 04/12] net: ethernet: stmmac: rework glue to simplify management for next stm32 Christophe Roullier
2023-09-28 15:15 ` [PATCH v3 05/12] net: ethernet: stmmac: add management of stm32mp13 for stm32 Christophe Roullier
2023-09-28 15:15 ` Christophe Roullier [this message]
2023-09-28 15:15 ` [PATCH v3 07/12] net: ethernet: stm32: clean the way to manage wol irqwake Christophe Roullier
2023-09-28 15:15 ` [PATCH v3 08/12] net: ethernet: stmmac: stm32: support the phy-supply regulator binding Christophe Roullier
2023-09-28 15:45 ` Ben Wolsieffer
2023-10-05 11:27 ` Christophe ROULLIER
2023-10-06 11:53 ` Alexandre TORGUE
2023-09-28 15:15 ` [PATCH v3 09/12] ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13 Christophe Roullier
2023-09-28 15:15 ` [PATCH v3 10/12] ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board Christophe Roullier
2023-09-28 15:15 ` [PATCH v3 11/12] ARM: dts: stm32: add ethernet1 and ethernet2 for STM32MP135F-DK board Christophe Roullier
2023-09-28 15:15 ` [PATCH v3 12/12] ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support Christophe Roullier
2023-09-28 18:00 ` [PATCH v3 00/12] Series to deliver Ethernets for STM32MP13 Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230928151512.322016-7-christophe.roullier@foss.st.com \
--to=christophe.roullier@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).