From: Abdel Alkuor <alkuor@gmail.com>
To: heikki.krogerus@linux.intel.com,
krzysztof.kozlowski+dt@linaro.org, bryan.odonoghue@linaro.org
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, ryan.eleceng@gmail.com,
robh+dt@kernel.org, conor+dt@kernel.org,
devicetree@vger.kernel.org, Abdel Alkuor <abdelalkuor@geotab.com>
Subject: [PATCH v9 08/14] USB: typec: tps6598x: Add interrupt support for TPS25750
Date: Sun, 1 Oct 2023 04:11:28 -0400 [thread overview]
Message-ID: <20231001081134.37101-9-alkuor@gmail.com> (raw)
In-Reply-To: <20231001081134.37101-1-alkuor@gmail.com>
From: Abdel Alkuor <abdelalkuor@geotab.com>
tps25750 event registers structure is different than tps6598x's,
tps25750 has 11 bytes of events which are read at once where
tps6598x has two event registers of 8 bytes each which are read
separately. Likewise MASK event registers. Also, not all events
are supported in both devices.
- Create a new handler to accommodate tps25750 interrupt
- Add device data to of_device_id
Signed-off-by: Abdel Alkuor <abdelalkuor@geotab.com>
---
Changes in v9:
- Move of_device_id to its original place
- Move device data structs to the top of of_device_id
- Use device_get_match_data to get device data
Changes in v8:
- Populate of_device_id with device data
- Change tps->cb to tps->data
- Assign matched data to tps data
Changes in v7:
- Add driver name to commit subject
- Create tps25750 interrupt handler
Changes in v6:
- Create tipd callbacks factory
Changes in v5:
- Incorporating tps25750 into tps6598x driver
drivers/usb/typec/tipd/core.c | 96 +++++++++++++++++++++++++++++++----
1 file changed, 87 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index 32e42798688f..52dc1cc16bed 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -18,6 +18,7 @@
#include <linux/usb/role.h>
#include <linux/workqueue.h>
#include <linux/firmware.h>
+#include <linux/of_device.h>
#include "tps6598x.h"
#include "trace.h"
@@ -101,6 +102,10 @@ static const char *const modes[] = {
/* Unrecognized commands will be replaced with "!CMD" */
#define INVALID_CMD(_cmd_) (_cmd_ == 0x444d4321)
+struct tipd_data {
+ irq_handler_t irq_handler;
+};
+
struct tps6598x {
struct device *dev;
struct regmap *regmap;
@@ -118,9 +123,11 @@ struct tps6598x {
enum power_supply_usb_type usb_type;
int wakeup;
+ u32 status; /* status reg */
u16 pwr_status;
struct delayed_work wq_poll;
- irq_handler_t irq_handler;
+
+ const struct tipd_data *data;
};
static enum power_supply_property tps6598x_psy_props[] = {
@@ -545,6 +552,64 @@ static irqreturn_t cd321x_interrupt(int irq, void *data)
return IRQ_NONE;
}
+static bool tps6598x_has_role_changed(struct tps6598x *tps, u32 status)
+{
+ status ^= tps->status;
+
+ return status & (TPS_STATUS_PORTROLE | TPS_STATUS_DATAROLE);
+}
+
+static irqreturn_t tps25750_interrupt(int irq, void *data)
+{
+ struct tps6598x *tps = data;
+ u64 event[2] = { };
+ u32 status;
+ int ret;
+
+ mutex_lock(&tps->lock);
+
+ ret = tps6598x_block_read(tps, TPS_REG_INT_EVENT1, event, 11);
+ if (ret) {
+ dev_err(tps->dev, "%s: failed to read events\n", __func__);
+ goto err_unlock;
+ }
+
+ if (!(event[0] | event[1]))
+ goto err_unlock;
+
+ if (!tps6598x_read_status(tps, &status))
+ goto err_clear_ints;
+
+ if ((event[0] | event[1]) & TPS_REG_INT_POWER_STATUS_UPDATE)
+ if (!tps6598x_read_power_status(tps))
+ goto err_clear_ints;
+
+ if ((event[0] | event[1]) & TPS_REG_INT_DATA_STATUS_UPDATE)
+ if (!tps6598x_read_data_status(tps))
+ goto err_clear_ints;
+
+ /*
+ * data/port roles could be updated independently after
+ * a plug event. Therefore, we need to check
+ * for pr/dr status change to set TypeC dr/pr accordingly.
+ */
+ if ((event[0] | event[1]) & TPS_REG_INT_PLUG_EVENT ||
+ tps6598x_has_role_changed(tps, status))
+ tps6598x_handle_plug_event(tps, status);
+
+ tps->status = status;
+
+err_clear_ints:
+ tps6598x_block_write(tps, TPS_REG_INT_CLEAR1, event, 11);
+
+err_unlock:
+ mutex_unlock(&tps->lock);
+
+ if (event[0] | event[1])
+ return IRQ_HANDLED;
+ return IRQ_NONE;
+}
+
static irqreturn_t tps6598x_interrupt(int irq, void *data)
{
struct tps6598x *tps = data;
@@ -600,7 +665,7 @@ static void tps6598x_poll_work(struct work_struct *work)
struct tps6598x *tps = container_of(to_delayed_work(work),
struct tps6598x, wq_poll);
- tps->irq_handler(0, tps);
+ tps->data->irq_handler(0, tps);
queue_delayed_work(system_power_efficient_wq,
&tps->wq_poll, msecs_to_jiffies(POLL_INTERVAL));
}
@@ -969,7 +1034,6 @@ static int tps25750_apply_patch(struct tps6598x *tps)
static int tps6598x_probe(struct i2c_client *client)
{
- irq_handler_t irq_handler = tps6598x_interrupt;
struct device_node *np = client->dev.of_node;
struct typec_capability typec_cap = { };
struct tps6598x *tps;
@@ -1017,7 +1081,6 @@ static int tps6598x_probe(struct i2c_client *client)
APPLE_CD_REG_INT_DATA_STATUS_UPDATE |
APPLE_CD_REG_INT_PLUG_EVENT;
- irq_handler = cd321x_interrupt;
} else {
/* Enable power status, data status and plug event interrupts */
mask1 = TPS_REG_INT_POWER_STATUS_UPDATE |
@@ -1025,7 +1088,10 @@ static int tps6598x_probe(struct i2c_client *client)
TPS_REG_INT_PLUG_EVENT;
}
- tps->irq_handler = irq_handler;
+ tps->data = device_get_match_data(tps->dev);
+ if (!tps->data)
+ return -EINVAL;
+
/* Make sure the controller has application firmware running */
ret = tps6598x_check_mode(tps);
if (ret < 0)
@@ -1125,7 +1191,7 @@ static int tps6598x_probe(struct i2c_client *client)
if (client->irq) {
ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
- irq_handler,
+ tps->data->irq_handler,
IRQF_SHARED | IRQF_ONESHOT,
dev_name(&client->dev), tps);
} else {
@@ -1231,10 +1297,22 @@ static const struct dev_pm_ops tps6598x_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(tps6598x_suspend, tps6598x_resume)
};
+static const struct tipd_data cd321x_data = {
+ .irq_handler = cd321x_interrupt,
+};
+
+static const struct tipd_data tps6598x_data = {
+ .irq_handler = tps6598x_interrupt,
+};
+
+static const struct tipd_data tps25750_data = {
+ .irq_handler = tps25750_interrupt,
+};
+
static const struct of_device_id tps6598x_of_match[] = {
- { .compatible = "ti,tps6598x", },
- { .compatible = "apple,cd321x", },
- { .compatible = "ti,tps25750", },
+ { .compatible = "ti,tps6598x", &tps6598x_data},
+ { .compatible = "apple,cd321x", &cd321x_data},
+ { .compatible = "ti,tps25750", &tps25750_data},
{}
};
MODULE_DEVICE_TABLE(of, tps6598x_of_match);
--
2.34.1
next prev parent reply other threads:[~2023-10-01 8:15 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-01 8:11 [PATCH v9 00/14] Add TPS25750 USB type-C PD controller support Abdel Alkuor
2023-10-01 8:11 ` [PATCH v9 01/14] dt-bindings: usb: tps6598x: Add tps25750 Abdel Alkuor
2023-10-01 8:11 ` [PATCH v9 02/14] USB: typec: tsp6598x: Add cmd timeout and response delay Abdel Alkuor
2023-10-01 8:11 ` [PATCH v9 03/14] USB: typec: tps6598x: Add patch mode to tps6598x Abdel Alkuor
2023-10-03 5:28 ` Heikki Krogerus
2023-10-01 8:11 ` [PATCH v9 04/14] USB: typec: tps6598x: Load TPS25750 patch bundle Abdel Alkuor
2023-10-03 5:30 ` Heikki Krogerus
2023-10-03 7:01 ` Heikki Krogerus
2023-10-01 8:11 ` [PATCH v9 05/14] USB: typec: tps6598x: Check for EEPROM present Abdel Alkuor
2023-10-03 5:34 ` Heikki Krogerus
2023-10-03 11:11 ` Abdel Alkuor
2023-10-01 8:11 ` [PATCH v9 06/14] USB: typec: tps6598x: Clear dead battery flag Abdel Alkuor
2023-10-03 6:03 ` Heikki Krogerus
2023-10-03 11:13 ` Abdel Alkuor
2023-10-01 8:11 ` [PATCH v9 07/14] USB: typec: tps6598x: Apply patch again after power resume Abdel Alkuor
2023-10-03 6:21 ` Heikki Krogerus
2023-10-03 11:14 ` Abdel Alkuor
2023-10-01 8:11 ` Abdel Alkuor [this message]
2023-10-03 6:39 ` [PATCH v9 08/14] USB: typec: tps6598x: Add interrupt support for TPS25750 Heikki Krogerus
2023-10-03 11:18 ` Abdel Alkuor
2023-10-01 8:11 ` [PATCH v9 09/14] USB: typec: tps6598x: Refactor tps6598x port registration Abdel Alkuor
2023-10-03 6:43 ` Heikki Krogerus
2023-10-01 8:11 ` [PATCH v9 10/14] USB: typec: tps6598x: Add port registration for tps25750 Abdel Alkuor
2023-10-03 6:50 ` Heikki Krogerus
2023-10-01 8:11 ` [PATCH v9 11/14] USB: typec: tps6598x: Enable sleep mode " Abdel Alkuor
2023-10-01 8:11 ` [PATCH v9 12/14] USB: typec: tps6598x: Add trace for tps25750 irq Abdel Alkuor
2023-10-01 8:11 ` [PATCH v9 13/14] USB: typec: tps6598x: Add power status trace for tps25750 Abdel Alkuor
2023-10-01 8:11 ` [PATCH v9 14/14] USB: typec: tps6598x: Add " Abdel Alkuor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231001081134.37101-9-alkuor@gmail.com \
--to=alkuor@gmail.com \
--cc=abdelalkuor@geotab.com \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=ryan.eleceng@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).