From: Tomer Maimon <tmaimon77@gmail.com>
To: <ulf.hansson@linaro.org>, <avifishman70@gmail.com>,
<tali.perry1@gmail.com>, <joel@jms.id.au>, <venture@google.com>,
<yuenn@google.com>, <benjaminfair@google.com>,
<adrian.hunter@intel.com>, <skhan@linuxfoundation.org>,
<davidgow@google.com>, <pbrobinson@gmail.com>, <gsomlo@gmail.com>,
<briannorris@chromium.org>, <arnd@arndb.de>,
<krakoczy@antmicro.com>, <andy.shevchenko@gmail.com>
Cc: <openbmc@lists.ozlabs.org>, <linux-mmc@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v5 2/2] mmc: sdhci-npcm: Add NPCM SDHCI driver
Date: Mon, 2 Oct 2023 23:06:10 +0300 [thread overview]
Message-ID: <20231002200610.129799-3-tmaimon77@gmail.com> (raw)
In-Reply-To: <20231002200610.129799-1-tmaimon77@gmail.com>
Add Nuvoton NPCM BMC sdhci-pltfm controller driver.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/Kconfig | 8 +++
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-npcm.c | 94 +++++++++++++++++++++++++++++++++++
3 files changed, 103 insertions(+)
create mode 100644 drivers/mmc/host/sdhci-npcm.c
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 554e67103c1a..3999d4fddc73 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -429,6 +429,14 @@ config MMC_SDHCI_IPROC
If unsure, say N.
+config MMC_SDHCI_NPCM
+ tristate "Secure Digital Host Controller Interface support for NPCM"
+ depends on ARCH_NPCM || COMPILE_TEST
+ depends on MMC_SDHCI_PLTFM
+ help
+ This provides support for the SD/eMMC controller found in
+ NPCM BMC family SoCs.
+
config MMC_MESON_GX
tristate "Amlogic S905/GX*/AXG SD/MMC Host Controller support"
depends on ARCH_MESON|| COMPILE_TEST
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index a693fa3d3f1c..d0be4465f3ec 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -89,6 +89,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC) += sdhci-of-dwcmshc.o
obj-$(CONFIG_MMC_SDHCI_OF_SPARX5) += sdhci-of-sparx5.o
obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
obj-$(CONFIG_MMC_SDHCI_IPROC) += sdhci-iproc.o
+obj-$(CONFIG_MMC_SDHCI_NPCM) += sdhci-npcm.o
obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o
obj-$(CONFIG_MMC_SDHCI_ST) += sdhci-st.o
obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32) += sdhci-pic32.o
diff --git a/drivers/mmc/host/sdhci-npcm.c b/drivers/mmc/host/sdhci-npcm.c
new file mode 100644
index 000000000000..a3045dd2ddeb
--- /dev/null
+++ b/drivers/mmc/host/sdhci-npcm.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NPCM SDHC MMC host controller driver.
+ *
+ * Copyright (c) 2023 Nuvoton Technology corporation.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "sdhci-pltfm.h"
+
+static const struct sdhci_pltfm_data npcm7xx_sdhci_pdata = {
+ .quirks = SDHCI_QUIRK_DELAY_AFTER_POWER,
+ .quirks2 = SDHCI_QUIRK2_STOP_WITH_TC |
+ SDHCI_QUIRK2_NO_1_8_V,
+};
+
+static const struct sdhci_pltfm_data npcm8xx_sdhci_pdata = {
+ .quirks = SDHCI_QUIRK_DELAY_AFTER_POWER,
+ .quirks2 = SDHCI_QUIRK2_STOP_WITH_TC,
+};
+
+static int npcm_sdhci_probe(struct platform_device *pdev)
+{
+ const struct sdhci_pltfm_data *data;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct device *dev = &pdev->dev;
+ struct sdhci_host *host;
+ u32 caps;
+ int ret;
+
+ data = of_device_get_match_data(dev);
+ if (!data)
+ return -EINVAL;
+
+ host = sdhci_pltfm_init(pdev, data, 0);
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ pltfm_host = sdhci_priv(host);
+
+ pltfm_host->clk = devm_clk_get_optional_enabled(dev, NULL);
+ if (IS_ERR(pltfm_host->clk)) {
+ ret = PTR_ERR(pltfm_host->clk);
+ goto err_sdhci;
+ }
+
+ caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+ if (caps & SDHCI_CAN_DO_8BIT)
+ host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
+ ret = mmc_of_parse(host->mmc);
+ if (ret)
+ goto err_sdhci;
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto err_sdhci;
+
+ return 0;
+
+err_sdhci:
+ sdhci_pltfm_free(pdev);
+ return ret;
+}
+
+static const struct of_device_id npcm_sdhci_of_match[] = {
+ { .compatible = "nuvoton,npcm750-sdhci", .data = &npcm7xx_sdhci_pdata, },
+ { .compatible = "nuvoton,npcm845-sdhci", .data = &npcm8xx_sdhci_pdata, },
+ { }
+};
+MODULE_DEVICE_TABLE(of, npcm_sdhci_of_match);
+
+static struct platform_driver npcm_sdhci_driver = {
+ .driver = {
+ .name = "npcm-sdhci",
+ .of_match_table = npcm_sdhci_of_match,
+ .pm = &sdhci_pltfm_pmops,
+ },
+ .probe = npcm_sdhci_probe,
+ .remove_new = sdhci_pltfm_remove,
+};
+module_platform_driver(npcm_sdhci_driver);
+
+MODULE_DESCRIPTION("NPCM Secure Digital Host Controller Interface driver");
+MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
+MODULE_LICENSE("GPL");
--
2.33.0
next prev parent reply other threads:[~2023-10-02 20:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-02 20:06 [PATCH v5 0/2] add NPCM SDHCI driver support Tomer Maimon
2023-10-02 20:06 ` [PATCH v5 1/2] dt-bindings: mmc: npcm,sdhci: Document NPCM SDHCI controller Tomer Maimon
2023-10-02 20:06 ` Tomer Maimon [this message]
2023-10-03 10:49 ` [PATCH v5 2/2] mmc: sdhci-npcm: Add NPCM SDHCI driver Andy Shevchenko
2023-10-10 14:27 ` [PATCH v5 0/2] add NPCM SDHCI driver support Ulf Hansson
2023-10-10 19:35 ` Tomer Maimon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231002200610.129799-3-tmaimon77@gmail.com \
--to=tmaimon77@gmail.com \
--cc=adrian.hunter@intel.com \
--cc=andy.shevchenko@gmail.com \
--cc=arnd@arndb.de \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=briannorris@chromium.org \
--cc=davidgow@google.com \
--cc=devicetree@vger.kernel.org \
--cc=gsomlo@gmail.com \
--cc=joel@jms.id.au \
--cc=krakoczy@antmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=pbrobinson@gmail.com \
--cc=skhan@linuxfoundation.org \
--cc=tali.perry1@gmail.com \
--cc=ulf.hansson@linaro.org \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).