devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephan Gerhold <stephan@gerhold.net>
To: Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
	 Konrad Dybcio <konrad.dybcio@linaro.org>,
	linux-arm-msm@vger.kernel.org,  devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,  phone-devel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht,
	 Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	 Stephan Gerhold <stephan@gerhold.net>
Subject: [PATCH v2 04/14] arm64: dts: qcom: msm8916: Add common msm8916-modem-qdsp6.dtsi
Date: Tue, 03 Oct 2023 15:18:22 +0200	[thread overview]
Message-ID: <20231003-msm8916-modem-v2-4-61b684be55c0@gerhold.net> (raw)
In-Reply-To: <20231003-msm8916-modem-v2-0-61b684be55c0@gerhold.net>

Most MSM8916/MSM8939 devices use very similar setups for the modem,
because most of the device-specific details are abstracted by the modem
firmware. There are several definitions (status switches, DAI links
etc) that will be exactly the same for every board.

Introduce a common msm8916-modem-qdsp6.dtsi include that can be used to
simplify enabling the modem for such devices. By default the
digital/analog codec in the SoC/PMIC is used, but boards can define
additional codecs by adding additional backend DAI links.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi | 148 ++++++++++++++++++++++
 1 file changed, 148 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
new file mode 100644
index 000000000000..039961622633
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * msm8916-modem-qdsp6.dtsi describes the typical modem setup on MSM8916 devices
+ * (or similar SoCs) with audio routed via the QDSP6 services provided by the
+ * modem firmware. The digital/analog codec in the SoC/PMIC is used by default,
+ * but boards can define additional codecs by adding additional backend DAI links.
+ */
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+&apr {
+	status = "okay";
+};
+
+&bam_dmux {
+	status = "okay";
+};
+
+&bam_dmux_dma {
+	status = "okay";
+};
+
+&lpass {
+	status = "reserved"; /* Controlled by QDSP6 */
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&mba_mem {
+	status = "okay";
+};
+
+&mpss {
+	status = "okay";
+};
+
+&mpss_mem {
+	status = "okay";
+};
+
+&pm8916_codec {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <0 1>;
+	};
+	dai@20 {
+		reg = <TERTIARY_MI2S_TX>;
+		qcom,sd-lines = <0 1>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@1 {
+		reg = <1>;
+		direction = <Q6ASM_DAI_TX>;
+	};
+	dai@2 {
+		reg = <2>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@3 {
+		reg = <3>;
+		direction = <Q6ASM_DAI_RX>;
+		is-compress-dai;
+	};
+};
+
+&sound {
+	compatible = "qcom,msm8916-qdsp6-sndcard";
+	model = "msm8916";
+
+	pinctrl-0 = <&cdc_pdm_default>;
+	pinctrl-1 = <&cdc_pdm_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	frontend0-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	frontend1-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	frontend2-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	frontend3-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	sound_link_backend0: backend0-dai-link {
+		link-name = "Primary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	sound_link_backend1: backend1-dai-link {
+		link-name = "Tertiary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai TERTIARY_MI2S_TX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};

-- 
2.42.0


  parent reply	other threads:[~2023-10-03 13:18 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-03 13:18 [PATCH v2 00/14] arm64: dts: qcom: msm8916/39: Enable sound and modem with QDSP6 Stephan Gerhold
2023-10-03 13:18 ` [PATCH v2 01/14] arm64: dts: qcom: msm8939: Add BAM-DMUX WWAN Stephan Gerhold
2023-10-03 13:18 ` [PATCH v2 02/14] arm64: dts: qcom: msm8916: Add QDSP6 Stephan Gerhold
2023-10-03 13:18 ` [PATCH v2 03/14] arm64: dts: qcom: msm8939: " Stephan Gerhold
2023-10-03 13:18 ` Stephan Gerhold [this message]
2023-10-03 13:18 ` [PATCH v2 05/14] arm64: dts: qcom: msm8916-samsung-a2015: Add sound and modem Stephan Gerhold
2023-10-03 13:18 ` [PATCH v2 06/14] arm64: dts: qcom: msm8916-samsung-serranove: " Stephan Gerhold
2023-10-03 13:18 ` [PATCH v2 07/14] arm64: dts: qcom: msm8916-wingtech-wt88047: " Stephan Gerhold
2023-10-03 13:18 ` [PATCH v2 08/14] arm64: dts: qcom: msm8916-alcatel-idol347: " Stephan Gerhold
2023-10-03 13:18 ` [PATCH v2 09/14] arm64: dts: qcom: msm8916-asus-z00l: " Stephan Gerhold
2023-10-03 13:18 ` [PATCH v2 10/14] arm64: dts: qcom: msm8916-longcheer-l8150: " Stephan Gerhold
2023-10-03 13:18 ` [PATCH v2 11/14] arm64: dts: qcom: msm8916-longcheer-l8910: " Stephan Gerhold
2023-10-03 13:18 ` [PATCH v2 12/14] arm64: dts: qcom: msm8916-samsung-gt5: " Stephan Gerhold
2023-10-03 13:18 ` [PATCH v2 13/14] arm64: dts: qcom: msm8916-samsung-j5: " Stephan Gerhold
2023-10-03 13:18 ` [PATCH v2 14/14] arm64: dts: qcom: msm8939-samsung-a7: " Stephan Gerhold
2023-10-22 15:50 ` [PATCH v2 00/14] arm64: dts: qcom: msm8916/39: Enable sound and modem with QDSP6 Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231003-msm8916-modem-v2-4-61b684be55c0@gerhold.net \
    --to=stephan@gerhold.net \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=bryan.odonoghue@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).