[PATCH v2 0/6] SDM670 display subsystem support

[PATCH v2 0/6] SDM670 display subsystem support

[Richard Acayan]

Changes since v1 (20230925232625.846666-9-mailingradian@gmail.com):
 - prefix dsi1 labels with `mdss_` in example dts (3/6)
 - make all parts of catalog entry const (5/6)
 - add spaces before closing brackets on same line (5/6)
 - join opening and closing braces on the same line in dsc array (5/6)

This series adds support for the display subsystem on the Snapdragon
670. It is based on an earlier patch a few versions back, which had
missing device tree bindings and device tree changes.

There is a separate IOMMU patch which adds the MDSS compatible to a
workaround.

Richard Acayan (6):
  dt-bindings: display/msm: dsi-controller-main: add SDM670 compatible
  dt-bindings: display/msm: sdm845-dpu: Describe SDM670
  dt-bindings: display: msm: Add SDM670 MDSS
  drm/msm: mdss: add support for SDM670
  drm/msm/dpu: Add hw revision 4.1 (SDM670)
  arm64: dts: qcom: sdm670: add display subsystem

 .../display/msm/dsi-controller-main.yaml      |   1 +
 .../display/msm/qcom,sdm670-mdss.yaml         | 287 +++++++++++++++++
 .../bindings/display/msm/qcom,sdm845-dpu.yaml |   4 +-
 arch/arm64/boot/dts/qcom/sdm670.dtsi          | 294 ++++++++++++++++++
 .../msm/disp/dpu1/catalog/dpu_4_1_sdm670.h    | 104 +++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    |   6 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
 drivers/gpu/drm/msm/msm_mdss.c                |   7 +
 9 files changed, 704 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h

-- 
2.42.0

[PATCH v2 1/6] dt-bindings: display/msm: dsi-controller-main: add SDM670 compatible

[Richard Acayan]

The SDM670 has DSI ports. Add the compatible for the controller.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 .../devicetree/bindings/display/msm/dsi-controller-main.yaml     | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index c6dbab65d5f7..887c7dcaf438 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -25,6 +25,7 @@ properties:
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
               - qcom,sdm660-dsi-ctrl
+              - qcom,sdm670-dsi-ctrl
               - qcom,sdm845-dsi-ctrl
               - qcom,sm6115-dsi-ctrl
               - qcom,sm6125-dsi-ctrl
-- 
2.42.0

[PATCH v2 2/6] dt-bindings: display/msm: sdm845-dpu: Describe SDM670

[Richard Acayan]

The SDM670 display controller has the same requirements as the SDM845
display controller, despite having distinct properties as described in
the catalog. Add the compatible for SDM670 to the SDM845 controller.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 .../devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml      | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
index b917064bdf33..dc11fd421a27 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
@@ -13,7 +13,9 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 
 properties:
   compatible:
-    const: qcom,sdm845-dpu
+    enum:
+      - qcom,sdm670-dpu
+      - qcom,sdm845-dpu
 
   reg:
     items:
-- 
2.42.0

[PATCH v2 3/6] dt-bindings: display: msm: Add SDM670 MDSS

[Richard Acayan]

Add documentation for the SDM670 display subsystem, adapted from the
SDM845 and SM6125 documentation.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 .../display/msm/qcom,sdm670-mdss.yaml         | 287 ++++++++++++++++++
 1 file changed, 287 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
new file mode 100644
index 000000000000..9995b018cd9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
@@ -0,0 +1,287 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm670-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM670 Display MDSS
+
+maintainers:
+  - Richard Acayan <mailingradian@gmail.com>
+
+description:
+  SDM670 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm670-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sdm670-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sdm670-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sdm670-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sdm670-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x880 0x8>,
+                 <&apps_smmu 0xc80 0x8>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sdm670-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SDM670_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss_dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM670_CX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM670_CX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
-- 
2.42.0

[PATCH v2 4/6] drm/msm: mdss: add support for SDM670

[Richard Acayan]

Add support for the MDSS block on the SDM670 platform.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 drivers/gpu/drm/msm/msm_mdss.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index 2e87dd6cb17b..2afb843271aa 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -551,6 +551,12 @@ static const struct msm_mdss_data sc8280xp_data = {
 	.macrotile_mode = 1,
 };
 
+static const struct msm_mdss_data sdm670_data = {
+	.ubwc_enc_version = UBWC_2_0,
+	.ubwc_dec_version = UBWC_2_0,
+	.highest_bank_bit = 1,
+};
+
 static const struct msm_mdss_data sdm845_data = {
 	.ubwc_enc_version = UBWC_2_0,
 	.ubwc_dec_version = UBWC_2_0,
@@ -609,6 +615,7 @@ static const struct of_device_id mdss_dt_match[] = {
 	{ .compatible = "qcom,mdss" },
 	{ .compatible = "qcom,msm8998-mdss", .data = &msm8998_data },
 	{ .compatible = "qcom,qcm2290-mdss", .data = &qcm2290_data },
+	{ .compatible = "qcom,sdm670-mdss", .data = &sdm670_data },
 	{ .compatible = "qcom,sdm845-mdss", .data = &sdm845_data },
 	{ .compatible = "qcom,sc7180-mdss", .data = &sc7180_data },
 	{ .compatible = "qcom,sc7280-mdss", .data = &sc7280_data },
-- 
2.42.0

[PATCH v2 5/6] drm/msm/dpu: Add hw revision 4.1 (SDM670)

[Richard Acayan]

The Snapdragon 670 uses similar clocks (with one frequency added) to the
Snapdragon 845 but reports DPU revision 4.1. Add support for this DPU
with configuration from the Pixel 3a downstream kernel.

Since revision 4.0 is SDM845, reuse some configuration from its catalog
entry.

Link: https://android.googlesource.com/kernel/msm/+/368478b0ae76566927a2769a2bf24dfe7f38bb78/arch/arm64/boot/dts/qcom/sdm670-sde.dtsi
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 .../msm/disp/dpu1/catalog/dpu_4_1_sdm670.h    | 104 ++++++++++++++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    |   6 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
 4 files changed, 112 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h
new file mode 100644
index 000000000000..01a9aec1c956
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023, Richard Acayan. All rights reserved.
+ */
+
+#ifndef _DPU_4_1_SDM670_H
+#define _DPU_4_1_SDM670_H
+
+static const struct dpu_mdp_cfg sdm670_mdp = {
+	.name = "top_0",
+	.base = 0x0, .len = 0x45c,
+	.features = BIT(DPU_MDP_AUDIO_SELECT),
+	.clk_ctrls = {
+		[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
+		[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
+		[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
+		[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
+		[DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2bc, .bit_off = 8 },
+	},
+};
+
+static const struct dpu_sspp_cfg sdm670_sspp[] = {
+	{
+		.name = "sspp_0", .id = SSPP_VIG0,
+		.base = 0x4000, .len = 0x1c8,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &sdm670_vig_sblk_0,
+		.xin_id = 0,
+		.type = SSPP_TYPE_VIG,
+		.clk_ctrl = DPU_CLK_CTRL_VIG0,
+	}, {
+		.name = "sspp_1", .id = SSPP_VIG1,
+		.base = 0x6000, .len = 0x1c8,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &sdm670_vig_sblk_1,
+		.xin_id = 4,
+		.type = SSPP_TYPE_VIG,
+		.clk_ctrl = DPU_CLK_CTRL_VIG0,
+	}, {
+		.name = "sspp_8", .id = SSPP_DMA0,
+		.base = 0x24000, .len = 0x1c8,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &sdm845_dma_sblk_0,
+		.xin_id = 1,
+		.type = SSPP_TYPE_DMA,
+		.clk_ctrl = DPU_CLK_CTRL_DMA0,
+	}, {
+		.name = "sspp_9", .id = SSPP_DMA1,
+		.base = 0x26000, .len = 0x1c8,
+		.features = DMA_CURSOR_SDM845_MASK_SDMA,
+		.sblk = &sdm845_dma_sblk_1,
+		.xin_id = 5,
+		.type = SSPP_TYPE_DMA,
+		.clk_ctrl = DPU_CLK_CTRL_DMA1,
+	}, {
+		.name = "sspp_10", .id = SSPP_DMA2,
+		.base = 0x28000, .len = 0x1c8,
+		.features = DMA_CURSOR_SDM845_MASK_SDMA,
+		.sblk = &sdm845_dma_sblk_2,
+		.xin_id = 9,
+		.type = SSPP_TYPE_DMA,
+		.clk_ctrl = DPU_CLK_CTRL_DMA2,
+	},
+};
+
+static const struct dpu_dsc_cfg sdm670_dsc[] = {
+	{
+		.name = "dsc_0", .id = DSC_0,
+		.base = 0x80000, .len = 0x140,
+	}, {
+		.name = "dsc_1", .id = DSC_1,
+		.base = 0x80400, .len = 0x140,
+	},
+};
+
+static const struct dpu_mdss_version sdm670_mdss_ver = {
+	.core_major_ver = 4,
+	.core_minor_ver = 1,
+};
+
+const struct dpu_mdss_cfg dpu_sdm670_cfg = {
+	.mdss_ver = &sdm670_mdss_ver,
+	.caps = &sdm845_dpu_caps,
+	.mdp = &sdm670_mdp,
+	.ctl_count = ARRAY_SIZE(sdm845_ctl),
+	.ctl = sdm845_ctl,
+	.sspp_count = ARRAY_SIZE(sdm670_sspp),
+	.sspp = sdm670_sspp,
+	.mixer_count = ARRAY_SIZE(sdm845_lm),
+	.mixer = sdm845_lm,
+	.pingpong_count = ARRAY_SIZE(sdm845_pp),
+	.pingpong = sdm845_pp,
+	.dsc_count = ARRAY_SIZE(sdm670_dsc),
+	.dsc = sdm670_dsc,
+	.intf_count = ARRAY_SIZE(sdm845_intf),
+	.intf = sdm845_intf,
+	.vbif_count = ARRAY_SIZE(sdm845_vbif),
+	.vbif = sdm845_vbif,
+	.perf = &sdm845_perf_data,
+};
+
+#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 713dfc079718..63b274ae032a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -313,6 +313,11 @@ static const struct dpu_rotation_cfg dpu_rot_sc7280_cfg_v2 = {
 	.rot_format_list = rotation_v2_formats,
 };
 
+static const struct dpu_sspp_sub_blks sdm670_vig_sblk_0 =
+				_VIG_SBLK(4, DPU_SSPP_SCALER_QSEED3);
+static const struct dpu_sspp_sub_blks sdm670_vig_sblk_1 =
+				_VIG_SBLK(5, DPU_SSPP_SCALER_QSEED3);
+
 static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 =
 				_VIG_SBLK(5, DPU_SSPP_SCALER_QSEED3);
 static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 =
@@ -655,6 +660,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
 #include "catalog/dpu_3_0_msm8998.h"
 
 #include "catalog/dpu_4_0_sdm845.h"
+#include "catalog/dpu_4_1_sdm670.h"
 
 #include "catalog/dpu_5_0_sm8150.h"
 #include "catalog/dpu_5_1_sc8180x.h"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 6c9634209e9f..dae5a1555e44 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -831,6 +831,7 @@ struct dpu_mdss_cfg {
 
 extern const struct dpu_mdss_cfg dpu_msm8998_cfg;
 extern const struct dpu_mdss_cfg dpu_sdm845_cfg;
+extern const struct dpu_mdss_cfg dpu_sdm670_cfg;
 extern const struct dpu_mdss_cfg dpu_sm8150_cfg;
 extern const struct dpu_mdss_cfg dpu_sc8180x_cfg;
 extern const struct dpu_mdss_cfg dpu_sm8250_cfg;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index aa6ba2cf4b84..0049fb1de1e8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1362,6 +1362,7 @@ static const struct dev_pm_ops dpu_pm_ops = {
 static const struct of_device_id dpu_dt_match[] = {
 	{ .compatible = "qcom,msm8998-dpu", .data = &dpu_msm8998_cfg, },
 	{ .compatible = "qcom,qcm2290-dpu", .data = &dpu_qcm2290_cfg, },
+	{ .compatible = "qcom,sdm670-dpu", .data = &dpu_sdm670_cfg, },
 	{ .compatible = "qcom,sdm845-dpu", .data = &dpu_sdm845_cfg, },
 	{ .compatible = "qcom,sc7180-dpu", .data = &dpu_sc7180_cfg, },
 	{ .compatible = "qcom,sc7280-dpu", .data = &dpu_sc7280_cfg, },
-- 
2.42.0

[PATCH v2 6/6] arm64: dts: qcom: sdm670: add display subsystem

[Richard Acayan]

The Snapdragon 670 has a display subsystem for controlling and
outputting to the display. Add support for it in the device tree.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 arch/arm64/boot/dts/qcom/sdm670.dtsi | 294 +++++++++++++++++++++++++++
 1 file changed, 294 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index 84cd2e39266f..427415ed4e4a 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -6,6 +6,7 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -400,6 +401,30 @@ cpu6_opp10: opp-1996800000 {
 		};
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-180000000 {
+			opp-hz = /bits/ 64 <180000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -1352,6 +1377,275 @@ spmi_bus: spmi@c440000 {
 			#interrupt-cells = <4>;
 		};
 
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sdm670-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x880 0x8>,
+				 <&apps_smmu 0xc80 0x8>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sdm670-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96a00 0 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sdm845-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_link_clk_divsel_ten",
+				      "dp_vco_divided_clk_src_mux";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x80000>;
-- 
2.42.0

Re: [PATCH v2 3/6] dt-bindings: display: msm: Add SDM670 MDSS

[Krzysztof Kozlowski]

On 03/10/2023 03:21, Richard Acayan wrote:
> Add documentation for the SDM670 display subsystem, adapted from the
> SDM845 and SM6125 documentation.
> 
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> ---
>  .../display/msm/qcom,sdm670-mdss.yaml         | 287 ++++++++++++++++++
>  1 file changed, 287 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
> new file mode 100644
> index 000000000000..9995b018cd9e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
> @@ -0,0 +1,287 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/qcom,sdm670-mdss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SDM670 Display MDSS
> +
> +maintainers:
> +  - Richard Acayan <mailingradian@gmail.com>
> +
> +description:
> +  SDM670 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
> +  like DPU display controller, DSI and DP interfaces etc.
> +
> +$ref: /schemas/display/msm/mdss-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: qcom,sdm670-mdss
> +
> +  clocks:
> +    items:
> +      - description: Display AHB clock from gcc
> +      - description: Display core clock
> +
> +  clock-names:
> +    items:
> +      - const: iface
> +      - const: core
> +
> +  iommus:
> +    maxItems: 2
> +
> +  interconnects:
> +    maxItems: 2
> +
> +  interconnect-names:
> +    maxItems: 2
> +
> +patternProperties:
> +  "^display-controller@[0-9a-f]+$":
> +    type: object
> +    additionalProperties: true
> +
> +    properties:
> +      compatible:
> +        const: qcom,sdm670-dpu
> +
> +  "^displayport-controller@[0-9a-f]+$":
> +    type: object
> +    additionalProperties: true
> +
> +    properties:
> +      compatible:
> +        const: qcom,sdm670-dp
> +
> +  "^dsi@[0-9a-f]+$":
> +    type: object
> +    additionalProperties: true
> +
> +    properties:
> +      compatible:
> +        contains:
> +          const: qcom,sdm670-dsi-ctrl
> +
> +  "^phy@[0-9a-f]+$":
> +    type: object
> +    additionalProperties: true
> +
> +    properties:
> +      compatible:
> +        const: qcom,dsi-phy-10nm

This does not look right. Why the compatible is generic, not SoC-specific?

> +
> +required:
> +  - compatible
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
> +    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +    display-subsystem@ae00000 {
> +        compatible = "qcom,sdm670-mdss";
> +        reg = <0x0ae00000 0x1000>;
> +        reg-names = "mdss";
> +        power-domains = <&dispcc MDSS_GDSC>;
> +
> +        clocks = <&gcc GCC_DISP_AHB_CLK>,
> +                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
> +        clock-names = "iface", "core";
> +
> +        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-controller;
> +        #interrupt-cells = <1>;
> +

Please add interconnects. They do not have to be 100% exact with DTS
(unless interconnect header is not merged?). This is just an example.

> +        iommus = <&apps_smmu 0x880 0x8>,
> +                 <&apps_smmu 0xc80 0x8>;

> +
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges;
> +

Best regards,
Krzysztof

Re: [PATCH v2 3/6] dt-bindings: display: msm: Add SDM670 MDSS

[Dmitry Baryshkov]

On Tue, 3 Oct 2023 at 11:48, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 03/10/2023 03:21, Richard Acayan wrote:
> > Add documentation for the SDM670 display subsystem, adapted from the
> > SDM845 and SM6125 documentation.
> >
> > Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> > ---
> >  .../display/msm/qcom,sdm670-mdss.yaml         | 287 ++++++++++++++++++
> >  1 file changed, 287 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
> > new file mode 100644
> > index 000000000000..9995b018cd9e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
> > @@ -0,0 +1,287 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/msm/qcom,sdm670-mdss.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm SDM670 Display MDSS
> > +
> > +maintainers:
> > +  - Richard Acayan <mailingradian@gmail.com>
> > +
> > +description:
> > +  SDM670 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
> > +  like DPU display controller, DSI and DP interfaces etc.
> > +
> > +$ref: /schemas/display/msm/mdss-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,sdm670-mdss
> > +
> > +  clocks:
> > +    items:
> > +      - description: Display AHB clock from gcc
> > +      - description: Display core clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: iface
> > +      - const: core
> > +
> > +  iommus:
> > +    maxItems: 2
> > +
> > +  interconnects:
> > +    maxItems: 2
> > +
> > +  interconnect-names:
> > +    maxItems: 2
> > +
> > +patternProperties:
> > +  "^display-controller@[0-9a-f]+$":
> > +    type: object
> > +    additionalProperties: true
> > +
> > +    properties:
> > +      compatible:
> > +        const: qcom,sdm670-dpu
> > +
> > +  "^displayport-controller@[0-9a-f]+$":
> > +    type: object
> > +    additionalProperties: true
> > +
> > +    properties:
> > +      compatible:
> > +        const: qcom,sdm670-dp
> > +
> > +  "^dsi@[0-9a-f]+$":
> > +    type: object
> > +    additionalProperties: true
> > +
> > +    properties:
> > +      compatible:
> > +        contains:
> > +          const: qcom,sdm670-dsi-ctrl
> > +
> > +  "^phy@[0-9a-f]+$":
> > +    type: object
> > +    additionalProperties: true
> > +
> > +    properties:
> > +      compatible:
> > +        const: qcom,dsi-phy-10nm
>
> This does not look right. Why the compatible is generic, not SoC-specific?

Because for 10nm DSI PHY we don't have SoC-specific compatibles other
than the ugly 8998 compat string.

>
> > +
> > +required:
> > +  - compatible
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
> > +    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> > +    #include <dt-bindings/clock/qcom,rpmh.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/power/qcom-rpmpd.h>
> > +
> > +    display-subsystem@ae00000 {
> > +        compatible = "qcom,sdm670-mdss";
> > +        reg = <0x0ae00000 0x1000>;
> > +        reg-names = "mdss";
> > +        power-domains = <&dispcc MDSS_GDSC>;
> > +
> > +        clocks = <&gcc GCC_DISP_AHB_CLK>,
> > +                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
> > +        clock-names = "iface", "core";
> > +
> > +        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > +        interrupt-controller;
> > +        #interrupt-cells = <1>;
> > +
>
> Please add interconnects. They do not have to be 100% exact with DTS
> (unless interconnect header is not merged?). This is just an example.
>
> > +        iommus = <&apps_smmu 0x880 0x8>,
> > +                 <&apps_smmu 0xc80 0x8>;
>
> > +
> > +        #address-cells = <1>;
> > +        #size-cells = <1>;
> > +        ranges;
> > +
>
> Best regards,
> Krzysztof
>


-- 
With best wishes
Dmitry

Re: [PATCH v2 3/6] dt-bindings: display: msm: Add SDM670 MDSS

[Krzysztof Kozlowski]

On 03/10/2023 12:31, Dmitry Baryshkov wrote:
>>> +patternProperties:
>>> +  "^display-controller@[0-9a-f]+$":
>>> +    type: object
>>> +    additionalProperties: true
>>> +
>>> +    properties:
>>> +      compatible:
>>> +        const: qcom,sdm670-dpu
>>> +
>>> +  "^displayport-controller@[0-9a-f]+$":
>>> +    type: object
>>> +    additionalProperties: true
>>> +
>>> +    properties:
>>> +      compatible:
>>> +        const: qcom,sdm670-dp
>>> +
>>> +  "^dsi@[0-9a-f]+$":
>>> +    type: object
>>> +    additionalProperties: true
>>> +
>>> +    properties:
>>> +      compatible:
>>> +        contains:
>>> +          const: qcom,sdm670-dsi-ctrl
>>> +
>>> +  "^phy@[0-9a-f]+$":
>>> +    type: object
>>> +    additionalProperties: true
>>> +
>>> +    properties:
>>> +      compatible:
>>> +        const: qcom,dsi-phy-10nm
>>
>> This does not look right. Why the compatible is generic, not SoC-specific?
> 
> Because for 10nm DSI PHY we don't have SoC-specific compatibles other
> than the ugly 8998 compat string.

OK.


Best regards,
Krzysztof

Re: [PATCH v2 4/6] drm/msm: mdss: add support for SDM670

[Dmitry Baryshkov]

On 03/10/2023 04:21, Richard Acayan wrote:
> Add support for the MDSS block on the SDM670 platform.
> 
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> ---
>   drivers/gpu/drm/msm/msm_mdss.c | 7 +++++++
>   1 file changed, 7 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH v2 6/6] arm64: dts: qcom: sdm670: add display subsystem

[Dmitry Baryshkov]

On 03/10/2023 04:21, Richard Acayan wrote:
> The Snapdragon 670 has a display subsystem for controlling and
> outputting to the display. Add support for it in the device tree.
> 
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> ---
>   arch/arm64/boot/dts/qcom/sdm670.dtsi | 294 +++++++++++++++++++++++++++
>   1 file changed, 294 insertions(+)

Two minor issues below. With them fixed:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
> index 84cd2e39266f..427415ed4e4a 100644
> --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
> @@ -6,6 +6,7 @@
>    * Copyright (c) 2022, Richard Acayan. All rights reserved.
>    */
>   
> +#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
>   #include <dt-bindings/clock/qcom,gcc-sdm845.h>
>   #include <dt-bindings/clock/qcom,rpmh.h>
>   #include <dt-bindings/dma/qcom-gpi.h>
> @@ -400,6 +401,30 @@ cpu6_opp10: opp-1996800000 {
>   		};
>   	};
>   
> +	dsi_opp_table: opp-table-dsi {
> +		compatible = "operating-points-v2";
> +
> +		opp-19200000 {
> +			opp-hz = /bits/ 64 <19200000>;
> +			required-opps = <&rpmhpd_opp_min_svs>;
> +		};
> +
> +		opp-180000000 {
> +			opp-hz = /bits/ 64 <180000000>;
> +			required-opps = <&rpmhpd_opp_low_svs>;
> +		};
> +
> +		opp-275000000 {
> +			opp-hz = /bits/ 64 <275000000>;
> +			required-opps = <&rpmhpd_opp_svs>;
> +		};
> +
> +		opp-358000000 {
> +			opp-hz = /bits/ 64 <358000000>;
> +			required-opps = <&rpmhpd_opp_svs_l1>;
> +		};
> +	};
> +
>   	psci {
>   		compatible = "arm,psci-1.0";
>   		method = "smc";
> @@ -1352,6 +1377,275 @@ spmi_bus: spmi@c440000 {
>   			#interrupt-cells = <4>;
>   		};
>   
> +		mdss: display-subsystem@ae00000 {
> +			compatible = "qcom,sdm670-mdss";
> +			reg = <0 0x0ae00000 0 0x1000>;
> +			reg-names = "mdss";
> +
> +			power-domains = <&dispcc MDSS_GDSC>;
> +
> +			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
> +			clock-names = "iface", "core";
> +
> +			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
> +					<&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
> +			interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> +			iommus = <&apps_smmu 0x880 0x8>,
> +				 <&apps_smmu 0xc80 0x8>;
> +
> +			status = "disabled";
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			mdss_mdp: display-controller@ae01000 {
> +				compatible = "qcom,sdm670-dpu";
> +				reg = <0 0x0ae01000 0 0x8f000>,
> +				      <0 0x0aeb0000 0 0x2008>;
> +				reg-names = "mdp", "vbif";
> +
> +				clocks = <&gcc GCC_DISP_AXI_CLK>,
> +					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
> +					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
> +					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> +				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
> +
> +				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> +				assigned-clock-rates = <19200000>;
> +				operating-points-v2 = <&mdp_opp_table>;
> +				power-domains = <&rpmhpd SDM670_CX>;
> +
> +				interrupt-parent = <&mdss>;
> +				interrupts = <0>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						dpu_intf0_out: endpoint {
> +							remote-endpoint = <&mdss_dsi0_in>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +						dpu_intf1_out: endpoint {
> +							remote-endpoint = <&mdss_dsi1_in>;
> +						};
> +					};
> +				};
> +
> +				mdp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-19200000 {
> +						opp-hz = /bits/ 64 <19200000>;
> +						required-opps = <&rpmhpd_opp_min_svs>;
> +					};
> +
> +					opp-171428571 {
> +						opp-hz = /bits/ 64 <171428571>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-358000000 {
> +						opp-hz = /bits/ 64 <358000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-430000000 {
> +						opp-hz = /bits/ 64 <430000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +
> +			mdss_dsi0: dsi@ae94000 {
> +				compatible = "qcom,sdm670-dsi-ctrl",
> +					     "qcom,mdss-dsi-ctrl";
> +				reg = <0 0x0ae94000 0 0x400>;
> +				reg-names = "dsi_ctrl";
> +
> +				interrupt-parent = <&mdss>;
> +				interrupts = <4>;
> +
> +				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> +					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> +					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> +					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> +					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
> +				clock-names = "byte",
> +					      "byte_intf",
> +					      "pixel",
> +					      "core",
> +					      "iface",
> +					      "bus";
> +				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
> +						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss_dsi0_phy 0>,
> +							 <&mdss_dsi0_phy 1>;
> +
> +				operating-points-v2 = <&dsi_opp_table>;
> +				power-domains = <&rpmhpd SDM670_CX>;
> +
> +				phys = <&mdss_dsi0_phy>;
> +				phy-names = "dsi";

Not necessary anymore

> +
> +				status = "disabled";
> +
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						mdss_dsi0_in: endpoint {
> +							remote-endpoint = <&dpu_intf0_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +						mdss_dsi0_out: endpoint {
> +						};
> +					};
> +				};
> +			};
> +
> +			mdss_dsi0_phy: phy@ae94400 {
> +				compatible = "qcom,dsi-phy-10nm";
> +				reg = <0 0x0ae94400 0 0x200>,
> +				      <0 0x0ae94600 0 0x280>,
> +				      <0 0x0ae94a00 0 0x1e0>;
> +				reg-names = "dsi_phy",
> +					    "dsi_phy_lane",
> +					    "dsi_pll";
> +
> +				#clock-cells = <1>;
> +				#phy-cells = <0>;
> +
> +				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&rpmhcc RPMH_CXO_CLK>;
> +				clock-names = "iface", "ref";
> +
> +				status = "disabled";
> +			};
> +
> +			mdss_dsi1: dsi@ae96000 {
> +				compatible = "qcom,sdm670-dsi-ctrl",
> +					     "qcom,mdss-dsi-ctrl";
> +				reg = <0 0x0ae96000 0 0x400>;
> +				reg-names = "dsi_ctrl";
> +
> +				interrupt-parent = <&mdss>;
> +				interrupts = <5>;
> +
> +				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> +					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> +					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
> +					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
> +					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
> +				clock-names = "byte",
> +					      "byte_intf",
> +					      "pixel",
> +					      "core",
> +					      "iface",
> +					      "bus";
> +				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
> +						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
> +				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
> +
> +				operating-points-v2 = <&dsi_opp_table>;
> +				power-domains = <&rpmhpd SDM670_CX>;
> +
> +				phys = <&mdss_dsi1_phy>;
> +				phy-names = "dsi";

Not necessary anymore

> +
> +				status = "disabled";
> +
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						mdss_dsi1_in: endpoint {
> +							remote-endpoint = <&dpu_intf1_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +						mdss_dsi1_out: endpoint {
> +						};
> +					};
> +				};
> +			};
> +
> +			mdss_dsi1_phy: phy@ae96400 {
> +				compatible = "qcom,dsi-phy-10nm";
> +				reg = <0 0x0ae96400 0 0x200>,
> +				      <0 0x0ae96600 0 0x280>,
> +				      <0 0x0ae96a00 0 0x10e>;
> +				reg-names = "dsi_phy",
> +					    "dsi_phy_lane",
> +					    "dsi_pll";
> +
> +				#clock-cells = <1>;
> +				#phy-cells = <0>;
> +
> +				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&rpmhcc RPMH_CXO_CLK>;
> +				clock-names = "iface", "ref";
> +
> +				status = "disabled";
> +			};
> +		};
> +
> +		dispcc: clock-controller@af00000 {
> +			compatible = "qcom,sdm845-dispcc";
> +			reg = <0 0x0af00000 0 0x10000>;
> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
> +				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
> +				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
> +				 <&mdss_dsi0_phy 0>,
> +				 <&mdss_dsi0_phy 1>,
> +				 <&mdss_dsi1_phy 0>,
> +				 <&mdss_dsi1_phy 1>,
> +				 <0>,
> +				 <0>;
> +			clock-names = "bi_tcxo",
> +				      "gcc_disp_gpll0_clk_src",
> +				      "gcc_disp_gpll0_div_clk_src",
> +				      "dsi0_phy_pll_out_byteclk",
> +				      "dsi0_phy_pll_out_dsiclk",
> +				      "dsi1_phy_pll_out_byteclk",
> +				      "dsi1_phy_pll_out_dsiclk",
> +				      "dp_link_clk_divsel_ten",
> +				      "dp_vco_divided_clk_src_mux";
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +		};
> +
>   		apps_smmu: iommu@15000000 {
>   			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
>   			reg = <0 0x15000000 0 0x80000>;

-- 
With best wishes
Dmitry

Re: [PATCH v2 5/6] drm/msm/dpu: Add hw revision 4.1 (SDM670)

[Dmitry Baryshkov]

On 03/10/2023 04:21, Richard Acayan wrote:
> The Snapdragon 670 uses similar clocks (with one frequency added) to the
> Snapdragon 845 but reports DPU revision 4.1. Add support for this DPU
> with configuration from the Pixel 3a downstream kernel.
> 
> Since revision 4.0 is SDM845, reuse some configuration from its catalog
> entry.
> 
> Link: https://android.googlesource.com/kernel/msm/+/368478b0ae76566927a2769a2bf24dfe7f38bb78/arch/arm64/boot/dts/qcom/sdm670-sde.dtsi
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> ---
>   .../msm/disp/dpu1/catalog/dpu_4_1_sdm670.h    | 104 ++++++++++++++++++
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    |   6 +
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
>   4 files changed, 112 insertions(+)
>   create mode 100644 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h
> new file mode 100644
> index 000000000000..01a9aec1c956
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h
> @@ -0,0 +1,104 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2023, Richard Acayan. All rights reserved.
> + */
> +
> +#ifndef _DPU_4_1_SDM670_H
> +#define _DPU_4_1_SDM670_H
> +
> +static const struct dpu_mdp_cfg sdm670_mdp = {
> +	.name = "top_0",
> +	.base = 0x0, .len = 0x45c,
> +	.features = BIT(DPU_MDP_AUDIO_SELECT),
> +	.clk_ctrls = {
> +		[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
> +		[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
> +		[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
> +		[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
> +		[DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2bc, .bit_off = 8 },
> +	},
> +};
> +
> +static const struct dpu_sspp_cfg sdm670_sspp[] = {
> +	{
> +		.name = "sspp_0", .id = SSPP_VIG0,
> +		.base = 0x4000, .len = 0x1c8,
> +		.features = VIG_SDM845_MASK_SDMA,
> +		.sblk = &sdm670_vig_sblk_0,

Could you please rebase you patch on top of 
https://patchwork.freedesktop.org/series/119804/

That patchset removes the need for per-SoC, per-SSPP sblk structures.

I'm mostly sure that sdm670 has scaler version 1.3 (the same as sdm845), 
but you can verify this by reading the register 0x0ae05a00.

> +		.xin_id = 0,
> +		.type = SSPP_TYPE_VIG,
> +		.clk_ctrl = DPU_CLK_CTRL_VIG0,
> +	}, {
> +		.name = "sspp_1", .id = SSPP_VIG1,
> +		.base = 0x6000, .len = 0x1c8,
> +		.features = VIG_SDM845_MASK_SDMA,
> +		.sblk = &sdm670_vig_sblk_1,
> +		.xin_id = 4,
> +		.type = SSPP_TYPE_VIG,
> +		.clk_ctrl = DPU_CLK_CTRL_VIG0,
> +	}, {
> +		.name = "sspp_8", .id = SSPP_DMA0,
> +		.base = 0x24000, .len = 0x1c8,
> +		.features = DMA_SDM845_MASK_SDMA,
> +		.sblk = &sdm845_dma_sblk_0,
> +		.xin_id = 1,
> +		.type = SSPP_TYPE_DMA,
> +		.clk_ctrl = DPU_CLK_CTRL_DMA0,
> +	}, {
> +		.name = "sspp_9", .id = SSPP_DMA1,
> +		.base = 0x26000, .len = 0x1c8,
> +		.features = DMA_CURSOR_SDM845_MASK_SDMA,
> +		.sblk = &sdm845_dma_sblk_1,
> +		.xin_id = 5,
> +		.type = SSPP_TYPE_DMA,
> +		.clk_ctrl = DPU_CLK_CTRL_DMA1,
> +	}, {
> +		.name = "sspp_10", .id = SSPP_DMA2,
> +		.base = 0x28000, .len = 0x1c8,
> +		.features = DMA_CURSOR_SDM845_MASK_SDMA,
> +		.sblk = &sdm845_dma_sblk_2,
> +		.xin_id = 9,
> +		.type = SSPP_TYPE_DMA,
> +		.clk_ctrl = DPU_CLK_CTRL_DMA2,
> +	},
> +};
> +
> +static const struct dpu_dsc_cfg sdm670_dsc[] = {
> +	{
> +		.name = "dsc_0", .id = DSC_0,
> +		.base = 0x80000, .len = 0x140,
> +	}, {
> +		.name = "dsc_1", .id = DSC_1,
> +		.base = 0x80400, .len = 0x140,
> +	},
> +};
> +
> +static const struct dpu_mdss_version sdm670_mdss_ver = {
> +	.core_major_ver = 4,
> +	.core_minor_ver = 1,
> +};
> +
> +const struct dpu_mdss_cfg dpu_sdm670_cfg = {
> +	.mdss_ver = &sdm670_mdss_ver,
> +	.caps = &sdm845_dpu_caps,
> +	.mdp = &sdm670_mdp,
> +	.ctl_count = ARRAY_SIZE(sdm845_ctl),
> +	.ctl = sdm845_ctl,
> +	.sspp_count = ARRAY_SIZE(sdm670_sspp),
> +	.sspp = sdm670_sspp,
> +	.mixer_count = ARRAY_SIZE(sdm845_lm),
> +	.mixer = sdm845_lm,
> +	.pingpong_count = ARRAY_SIZE(sdm845_pp),
> +	.pingpong = sdm845_pp,
> +	.dsc_count = ARRAY_SIZE(sdm670_dsc),
> +	.dsc = sdm670_dsc,
> +	.intf_count = ARRAY_SIZE(sdm845_intf),
> +	.intf = sdm845_intf,
> +	.vbif_count = ARRAY_SIZE(sdm845_vbif),

We were duplicating the data for different platforms, even if they 
looked similar, it was not obvious what is the actual level of 
similarity. Nevertheless, for the sdm670 / sdm845 pair I think this 
looks good. Especially since we do not expect other DPU 4.x platforms.

> +	.vbif = sdm845_vbif,
> +	.perf = &sdm845_perf_data,
> +};
> +
> +#endif
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 713dfc079718..63b274ae032a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -313,6 +313,11 @@ static const struct dpu_rotation_cfg dpu_rot_sc7280_cfg_v2 = {
>   	.rot_format_list = rotation_v2_formats,
>   };
>   
> +static const struct dpu_sspp_sub_blks sdm670_vig_sblk_0 =
> +				_VIG_SBLK(4, DPU_SSPP_SCALER_QSEED3);
> +static const struct dpu_sspp_sub_blks sdm670_vig_sblk_1 =
> +				_VIG_SBLK(5, DPU_SSPP_SCALER_QSEED3);
> +
>   static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 =
>   				_VIG_SBLK(5, DPU_SSPP_SCALER_QSEED3);
>   static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 =
> @@ -655,6 +660,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
>   #include "catalog/dpu_3_0_msm8998.h"
>   
>   #include "catalog/dpu_4_0_sdm845.h"
> +#include "catalog/dpu_4_1_sdm670.h"
>   
>   #include "catalog/dpu_5_0_sm8150.h"
>   #include "catalog/dpu_5_1_sc8180x.h"
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 6c9634209e9f..dae5a1555e44 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -831,6 +831,7 @@ struct dpu_mdss_cfg {
>   
>   extern const struct dpu_mdss_cfg dpu_msm8998_cfg;
>   extern const struct dpu_mdss_cfg dpu_sdm845_cfg;
> +extern const struct dpu_mdss_cfg dpu_sdm670_cfg;
>   extern const struct dpu_mdss_cfg dpu_sm8150_cfg;
>   extern const struct dpu_mdss_cfg dpu_sc8180x_cfg;
>   extern const struct dpu_mdss_cfg dpu_sm8250_cfg;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index aa6ba2cf4b84..0049fb1de1e8 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1362,6 +1362,7 @@ static const struct dev_pm_ops dpu_pm_ops = {
>   static const struct of_device_id dpu_dt_match[] = {
>   	{ .compatible = "qcom,msm8998-dpu", .data = &dpu_msm8998_cfg, },
>   	{ .compatible = "qcom,qcm2290-dpu", .data = &dpu_qcm2290_cfg, },
> +	{ .compatible = "qcom,sdm670-dpu", .data = &dpu_sdm670_cfg, },
>   	{ .compatible = "qcom,sdm845-dpu", .data = &dpu_sdm845_cfg, },
>   	{ .compatible = "qcom,sc7180-dpu", .data = &dpu_sc7180_cfg, },
>   	{ .compatible = "qcom,sc7280-dpu", .data = &dpu_sc7280_cfg, },

-- 
With best wishes
Dmitry