Re: [PATCH v6 1/3] dt-bindings: Add beaglecc1352

[Nishanth Menon <nm@ti.com>]

On 17:39-20231003, Ayush Singh wrote:
> > > driver.
> > > 
> > > Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
> > > ---
> > >   .../devicetree/bindings/net/ti,cc1352p7.yaml  | 48 +++++++++++++++++++
> > >   MAINTAINERS                                   |  6 +++
> > >   2 files changed, 54 insertions(+)
> > >   create mode 100644 Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
> > > new file mode 100644
> > > index 000000000000..57bc2c43e5b1
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
> > > @@ -0,0 +1,48 @@
> > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/net/ti,cc1352p7.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Texas Instruments Simplelink CC1352P7 wireless MCU
> > > +
> > > +description:
> > > +  The cc1352p7 mcu can be connected via SPI or UART.
> > If over SPI, then the binding is incomplete. This is fine for now, I guess.
> > 
> > Best regards,
> > Krzysztof
> 
> Well, I added the line about SPI because the data sheet states that CC1352P7
> can be connected over SPI or UART when used as wireless MCU. But yes, I do
> not have much knowledge about SPI itself, so the bindings might be
> incomplete for SPI usage. Should I remove it or leave it be?

I'd suggest to leave it for now, we can expand as there is a need.

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D