From: Abdel Alkuor <alkuor@gmail.com>
To: heikki.krogerus@linux.intel.com,
krzysztof.kozlowski+dt@linaro.org, bryan.odonoghue@linaro.org
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, ryan.eleceng@gmail.com,
robh+dt@kernel.org, conor+dt@kernel.org,
devicetree@vger.kernel.org, Abdel Alkuor <abdelalkuor@geotab.com>
Subject: [PATCH v10 9/9] USB: typec: tps6598x: Add status trace for tps25750
Date: Tue, 3 Oct 2023 11:58:42 -0400 [thread overview]
Message-ID: <20231003155842.57313-10-alkuor@gmail.com> (raw)
In-Reply-To: <20231003155842.57313-1-alkuor@gmail.com>
From: Abdel Alkuor <abdelalkuor@geotab.com>
tps25750 status register is a subset of tps6598x status register, hence
a trace for tps25750 status register is added.
Signed-off-by: Abdel Alkuor <abdelalkuor@geotab.com>
---
Changes in v10:
- Move 0014-USB-typec-tps6598x-Add-status-trace-for-tps25750.patch to patch 9
- Remove status trace prototype from device data
Changes in v9:
- No changes
Changes in v8:
- No changes
Changes in v7:
- Add driver name to commit subject
Changes in v6:
- No changes
Changes in v5:
- Incorporating tps25750 into tps6598x driver
drivers/usb/typec/tipd/core.c | 1 +
drivers/usb/typec/tipd/trace.h | 37 ++++++++++++++++++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index 7bdf1ef5dd1a..0e867f531d34 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -1412,6 +1412,7 @@ static const struct tipd_data tps25750_data = {
.irq_handler = tps25750_interrupt,
.register_port = tps25750_register_port,
.trace_power_status = trace_tps25750_power_status,
+ .trace_status = trace_tps25750_status,
.apply_patch = tps25750_apply_patch,
};
diff --git a/drivers/usb/typec/tipd/trace.h b/drivers/usb/typec/tipd/trace.h
index 739b0a2a867d..0669cca12ea1 100644
--- a/drivers/usb/typec/tipd/trace.h
+++ b/drivers/usb/typec/tipd/trace.h
@@ -91,6 +91,14 @@
TPS_STATUS_USB_HOST_PRESENT_MASK | \
TPS_STATUS_LEGACY_MASK))
+#define TPS25750_STATUS_FLAGS_MASK (GENMASK(31, 0) ^ (TPS_STATUS_CONN_STATE_MASK | \
+ GENMASK(19, 7) | \
+ TPS_STATUS_VBUS_STATUS_MASK | \
+ TPS_STATUS_USB_HOST_PRESENT_MASK | \
+ TPS_STATUS_LEGACY_MASK | \
+ BIT(26) | \
+ GENMASK(31, 28)))
+
#define show_status_conn_state(status) \
__print_symbolic(TPS_STATUS_CONN_STATE((status)), \
{ TPS_STATUS_CONN_STATE_CONN_WITH_R_A, "conn-Ra" }, \
@@ -148,6 +156,14 @@
{ TPS_STATUS_HIGH_VOLAGE_WARNING, "HIGH_VOLAGE_WARNING" }, \
{ TPS_STATUS_HIGH_LOW_VOLTAGE_WARNING, "HIGH_LOW_VOLTAGE_WARNING" })
+#define show_tps25750_status_flags(flags) \
+ __print_flags((flags & TPS25750_STATUS_FLAGS_MASK), "|", \
+ { TPS_STATUS_PLUG_PRESENT, "PLUG_PRESENT" }, \
+ { TPS_STATUS_PLUG_UPSIDE_DOWN, "UPSIDE_DOWN" }, \
+ { TPS_STATUS_PORTROLE, "PORTROLE" }, \
+ { TPS_STATUS_DATAROLE, "DATAROLE" }, \
+ { TPS_STATUS_BIST, "BIST" })
+
#define show_power_status_source_sink(power_status) \
__print_symbolic(TPS_POWER_STATUS_SOURCESINK(power_status), \
{ 1, "sink" }, \
@@ -292,6 +308,27 @@ TRACE_EVENT(tps6598x_status,
)
);
+TRACE_EVENT(tps25750_status,
+ TP_PROTO(u32 status),
+ TP_ARGS(status),
+
+ TP_STRUCT__entry(
+ __field(u32, status)
+ ),
+
+ TP_fast_assign(
+ __entry->status = status;
+ ),
+
+ TP_printk("conn: %s, vbus: %s, usb-host: %s, legacy: %s, flags: %s",
+ show_status_conn_state(__entry->status),
+ show_status_vbus_status(__entry->status),
+ show_status_usb_host_present(__entry->status),
+ show_status_legacy(__entry->status),
+ show_tps25750_status_flags(__entry->status)
+ )
+);
+
TRACE_EVENT(tps6598x_power_status,
TP_PROTO(u16 power_status),
TP_ARGS(power_status),
--
2.34.1
next prev parent reply other threads:[~2023-10-03 16:01 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-03 15:58 [PATCH v10 00/14] Add TPS25750 USB type-C PD controller support Abdel Alkuor
2023-10-03 15:58 ` [PATCH v10 1/9] dt-bindings: usb: tps6598x: Add tps25750 Abdel Alkuor
2023-10-03 15:58 ` [PATCH v10 2/9] USB: typec: tsp6598x: Add cmd timeout and response delay Abdel Alkuor
2023-10-03 15:58 ` [PATCH v10 3/9] USB: typec: tps6598x: Add patch mode to tps6598x Abdel Alkuor
2023-10-03 15:58 ` [PATCH v10 4/9] USB: typec: tps6598x: Refactor tps6598x port registration Abdel Alkuor
2023-10-03 15:58 ` [PATCH v10 5/9] USB: typec: tps6598x: Add device data to of_device_id Abdel Alkuor
2023-10-10 5:55 ` Heikki Krogerus
2023-10-03 15:58 ` [PATCH v10 6/9] USB: typec: tps6598x: Add TPS25750 support Abdel Alkuor
2023-10-10 5:57 ` Heikki Krogerus
2023-10-03 15:58 ` [PATCH v10 7/9] USB: typec: tps6598x: Add trace for tps25750 irq Abdel Alkuor
2023-10-10 5:58 ` Heikki Krogerus
2023-10-03 15:58 ` [PATCH v10 8/9] USB: typec: tps6598x: Add power status trace for tps25750 Abdel Alkuor
2023-10-10 5:58 ` Heikki Krogerus
2023-10-03 15:58 ` Abdel Alkuor [this message]
2023-10-10 5:59 ` [PATCH v10 9/9] USB: typec: tps6598x: Add " Heikki Krogerus
2023-10-10 7:02 ` [PATCH v10 00/14] Add TPS25750 USB type-C PD controller support Greg KH
2023-10-10 11:09 ` Abdel Alkuor
2023-10-10 11:21 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231003155842.57313-10-alkuor@gmail.com \
--to=alkuor@gmail.com \
--cc=abdelalkuor@geotab.com \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=ryan.eleceng@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).