From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id AC6475697 for ; Wed, 4 Oct 2023 06:37:37 +0000 (UTC) Received: from mail-ej1-x62a.google.com (mail-ej1-x62a.google.com [IPv6:2a00:1450:4864:20::62a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C74D8B7 for ; Tue, 3 Oct 2023 23:37:34 -0700 (PDT) Received: by mail-ej1-x62a.google.com with SMTP id a640c23a62f3a-9adb9fa7200so127080466b.0 for ; Tue, 03 Oct 2023 23:37:34 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=pqrs.dk; s=google; t=1696401453; x=1697006253; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=OYKY9mFmL0eJ6Vii+DUBC2q4iHATJVweYT3mzBHdRNo=; b=iKrxyTwHsPTwXH3vxBl3LW0W/G5L1R+MW2SQCA6gx7mZDt094h06zefg/Hsr3aY7lB fUzwwmfaeCo0QLi5biJjGUnSul2O8QnIaNumwmzHFjO6bJVSh0hA2JUbepeXQPnbHK6p OS47pGoWpI1EHp/3ldLl1EjFhc+ZjEk+ZfC8X8R54GQo/omfVZBZjndg6/giwYsSog9g dBsUg9BuBZXzk2Jf1nI2eAOB5xhjEtggk5u9CqSqu4GBjfGN/7cH+DvA46LrkvdZ1BtR ClYUnjBUVELUHolIF+cbPKlDH0HLcY3tVq+Qvr80d9wTRFehgdWcaBKrTXDgd35rXJmw PZDQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1696401453; x=1697006253; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=OYKY9mFmL0eJ6Vii+DUBC2q4iHATJVweYT3mzBHdRNo=; b=o7Xgg7qOxzFsV0ePmbuJ0w0IwQZHjLVt2/3Jh/pDMihq455RwXzRR+dOBGcfYKAtWh YMQD1y6jFa2Co/JOyqzjxpfxnB1XLLNc3Dr/sWzJ1KiGkI+PYF6ZsMplSzfDwW3yUQvv TYhM0pOkRAlZAMzgATw51PF4dp6Pk74CJgQcEsYcVwnDJagF3Y6GbVl0Gn6xJ2+rX+nU nUFo/mJTz/7oOZEoCCv9E2QCQ8DZb8YGXSj53tbTrNOnY+2wFo03gYcmDuR5fnwsm2Sd 4z6to8MOEen/uok7tkvJu9OmG3QkAi9o2HtEQZiijm7aViXHLud2OR8vXkTd3WssV0p2 VgLw== X-Gm-Message-State: AOJu0YzP9EtvJ42JJWG8iF86oGy73gi4Ops1VuxO4gfsTqVThZsAFfMx 0/WlXgKaJj1lJkfn68hza4jzsw== X-Google-Smtp-Source: AGHT+IGpHgyVPc6kOSyP5QaEmukyp94bUYaLYHUd5j+0jlgaXbkILR3X0vFPfO0AgXq0gwSWrNxMYA== X-Received: by 2002:a17:906:5e:b0:9a9:f0e6:904e with SMTP id 30-20020a170906005e00b009a9f0e6904emr1201861ejg.16.1696401452905; Tue, 03 Oct 2023 23:37:32 -0700 (PDT) Received: from capella.localdomain ([193.89.194.60]) by smtp.gmail.com with ESMTPSA id jx14-20020a170906ca4e00b009ade1a4f795sm2193507ejb.168.2023.10.03.23.37.31 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 03 Oct 2023 23:37:32 -0700 (PDT) From: =?UTF-8?q?Alvin=20=C5=A0ipraga?= To: Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Andrew Lunn , Sebastian Hesselbarth , Gregory Clement , =?UTF-8?q?=A0ipraga?= Cc: Rabeeh Khoury , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 1/4] dt-bindings: clock: si5351: convert to yaml Date: Wed, 4 Oct 2023 08:35:27 +0200 Message-ID: <20231004063712.3348978-2-alvin@pqrs.dk> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20231004063712.3348978-1-alvin@pqrs.dk> References: <20231004063712.3348978-1-alvin@pqrs.dk> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_NONE, SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net From: Alvin Šipraga The following additional properties are described: - clock-names - clock-frequency of the clkout child nodes In order to suppress warnings from the DT schema validator, the clkout child nodes are prescribed names clkout@[0-7] rather than clkout[0-7]. The latter form is still admissible but the example has been changed to use the former. The example is refined as follows: - correct the usage of property pll-master -> silabs,pll-master - give an example of how the silabs,pll-reset property can be used I made myself maintainer of the file as I cannot presume that anybody else wants the responsibility. Cc: Sebastian Hesselbarth Cc: Rabeeh Khoury Signed-off-by: Alvin Šipraga --- .../bindings/clock/silabs,si5351.txt | 126 --------- .../bindings/clock/silabs,si5351.yaml | 253 ++++++++++++++++++ 2 files changed, 253 insertions(+), 126 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/silabs,si5351.txt create mode 100644 Documentation/devicetree/bindings/clock/silabs,si5351.yaml diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt deleted file mode 100644 index bfda6af76bee..000000000000 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ /dev/null @@ -1,126 +0,0 @@ -Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator. - -Reference -[1] Si5351A/B/C Data Sheet - https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf - -The Si5351a/b/c are programmable i2c clock generators with up to 8 output -clocks. Si5351a also has a reduced pin-count package (MSOP10) where only -3 output clocks are accessible. The internal structure of the clock -generators can be found in [1]. - -==I2C device node== - -Required properties: -- compatible: shall be one of the following: - "silabs,si5351a" - Si5351a, QFN20 package - "silabs,si5351a-msop" - Si5351a, MSOP10 package - "silabs,si5351b" - Si5351b, QFN20 package - "silabs,si5351c" - Si5351c, QFN20 package -- reg: i2c device address, shall be 0x60 or 0x61. -- #clock-cells: from common clock binding; shall be set to 1. -- clocks: from common clock binding; list of parent clock - handles, shall be xtal reference clock or xtal and clkin for - si5351c only. Corresponding clock input names are "xtal" and - "clkin" respectively. -- #address-cells: shall be set to 1. -- #size-cells: shall be set to 0. - -Optional properties: -- silabs,pll-source: pair of (number, source) for each pll. Allows - to overwrite clock source of pll A (number=0) or B (number=1). - -==Child nodes== - -Each of the clock outputs can be overwritten individually by -using a child node to the I2C device node. If a child node for a clock -output is not set, the eeprom configuration is not overwritten. - -Required child node properties: -- reg: number of clock output. - -Optional child node properties: -- silabs,clock-source: source clock of the output divider stage N, shall be - 0 = multisynth N - 1 = multisynth 0 for output clocks 0-3, else multisynth4 - 2 = xtal - 3 = clkin (si5351c only) -- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}. -- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth - divider. -- silabs,pll-master: boolean, multisynth can change pll frequency. -- silabs,pll-reset: boolean, clock output can reset its pll. -- silabs,disable-state : clock output disable state, shall be - 0 = clock output is driven LOW when disabled - 1 = clock output is driven HIGH when disabled - 2 = clock output is FLOATING (HIGH-Z) when disabled - 3 = clock output is NEVER disabled - -==Example== - -/* 25MHz reference crystal */ -ref25: ref25M { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; -}; - -i2c-master-node { - - /* Si5351a msop10 i2c clock generator */ - si5351a: clock-generator@60 { - compatible = "silabs,si5351a-msop"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <1>; - - /* connect xtal input to 25MHz reference */ - clocks = <&ref25>; - clock-names = "xtal"; - - /* connect xtal input as source of pll0 and pll1 */ - silabs,pll-source = <0 0>, <1 0>; - - /* - * overwrite clkout0 configuration with: - * - 8mA output drive strength - * - pll0 as clock source of multisynth0 - * - multisynth0 as clock source of output divider - * - multisynth0 can change pll0 - * - set initial clock frequency of 74.25MHz - */ - clkout0 { - reg = <0>; - silabs,drive-strength = <8>; - silabs,multisynth-source = <0>; - silabs,clock-source = <0>; - silabs,pll-master; - clock-frequency = <74250000>; - }; - - /* - * overwrite clkout1 configuration with: - * - 4mA output drive strength - * - pll1 as clock source of multisynth1 - * - multisynth1 as clock source of output divider - * - multisynth1 can change pll1 - */ - clkout1 { - reg = <1>; - silabs,drive-strength = <4>; - silabs,multisynth-source = <1>; - silabs,clock-source = <0>; - pll-master; - }; - - /* - * overwrite clkout2 configuration with: - * - xtal as clock source of output divider - */ - clkout2 { - reg = <2>; - silabs,clock-source = <2>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.yaml b/Documentation/devicetree/bindings/clock/silabs,si5351.yaml new file mode 100644 index 000000000000..400c8cec2a3a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.yaml @@ -0,0 +1,253 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/silabs,si5351.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Labs Si5351A/B/C programmable I2C clock generators + +description: | + The Silicon Labs Si5351A/B/C are programmable I2C clock generators with up to + 8 outputs. Si5351A also has a reduced pin-count package (10-MSOP) where only 3 + output clocks are accessible. The internal structure of the clock generators + can be found in [1]. + + [1] Si5351A/B/C Data Sheet + https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf + +maintainers: + - Alvin Šipraga + +properties: + compatible: + enum: + - silabs,si5351a # Si5351A, 20-QFN package + - silabs,si5351a-msop # Si5351A, 10-MSOP package + - silabs,si5351b # Si5351B, 20-QFN package + - silabs,si5351c # Si5351C, 20-QFN package + + reg: + enum: + - 0x60 + - 0x61 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#clock-cells": + const: 1 + + silabs,pll-source: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of cell pairs containing a PLL index and its source. Allows to + overwrite clock source of the internal PLLs. + minItems: 1 + items: + items: + - description: PLL A (0) or PLL B (1) + enum: [ 0, 1 ] + - description: PLL source, XTAL (0) or CLKIN (1, Si5351C only). + enum: [ 0, 1 ] + +patternProperties: + "^clkout@[0-7]$": + type: object + + properties: + reg: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Clock output number. + + clock-frequency: true + + silabs,clock-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Source clock of the this output's divider stage. + + 0 - use multisynth N for this output, where N is the output number + 1 - use either multisynth 0 (if output number is 0-3) or multisynth 4 + (otherwise) for this output + 2 - use XTAL for this output + 3 - use CLKIN for this output (Si5351C only) + + silabs,drive-strength: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 2, 4, 6, 8 ] + description: Output drive strength in mA. + + silabs,multisynth-source: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: | + Source PLL A (0) or B (1) for the corresponding multisynth divider. + + silabs,pll-master: + type: boolean + description: | + The frequency of the source PLL is allowed to be changed by the + multisynth when setting the rate of this clock output. + + silabs,pll-reset: + type: boolean + description: Reset the source PLL when enabling this clock output. + + silabs,disable-state: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + Clock output disable state. The state can be one of: + + 0 - clock output is driven LOW when disabled + 1 - clock output is driven HIGH when disabled + 2 - clock output is FLOATING (HIGH-Z) when disabled + 3 - clock output is never disabled + + allOf: + - if: + properties: + compatible: + contains: + const: silabs,si5351a-msop + then: + properties: + reg: + minimum: 0 + maximum: 2 + else: + properties: + reg: + minimum: 0 + maximum: 7 + + - if: + properties: + compatible: + contains: + const: silabs,si5351c + then: + properties: + silabs,clock-source: + enum: [ 0, 1, 2, 3 ] + else: + properties: + silabs,clock-source: + enum: [ 0, 1, 2 ] + required: + - reg + + additionalProperties: false + +allOf: + - $ref: /schemas/clock/clock.yaml + - if: + properties: + compatible: + contains: + enum: + - silabs,si5351a + - silabs,si5351a-msop + - silabs,si5351b + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: xtal + + - if: + properties: + compatible: + contains: + const: silabs,si5351c + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + clock-names: + minItems: 1 + items: + - const: xtal + - const: clkin + +required: + - reg + - "#address-cells" + - "#size-cells" + - "#clock-cells" + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + clock-generator@60 { + compatible = "silabs,si5351a-msop"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + /* Connect XTAL input to 25MHz reference */ + clocks = <&ref25>; + clock-names = "xtal"; + + /* Use XTAL input as source of PLL0 and PLL1 */ + silabs,pll-source = <0 0>, <1 0>; + + /* + * Overwrite CLK0 configuration with: + * - 8 mA output drive strength + * - PLL0 as clock source of multisynth 0 + * - Multisynth 0 as clock source of output divider + * - Multisynth 0 can change PLL0 + * - Set initial clock frequency of 74.25MHz + */ + clkout@0 { + reg = <0>; + silabs,drive-strength = <8>; + silabs,multisynth-source = <0>; + silabs,clock-source = <0>; + silabs,pll-master; + clock-frequency = <74250000>; + }; + + /* + * Overwrite CLK1 configuration with: + * - 4 mA output drive strength + * - PLL1 as clock source of multisynth 1 + * - Multisynth 1 as clock source of output divider + * - Multisynth 1 can change PLL1 + * - Reset PLL1 when enabling this clock output + */ + clkout@1 { + reg = <1>; + silabs,drive-strength = <4>; + silabs,multisynth-source = <1>; + silabs,clock-source = <0>; + silabs,pll-master; + silabs,pll-reset; + }; + + /* + * Overwrite CLK2 configuration with: + * - XTAL as clock source of output divider + */ + clkout@2 { + reg = <2>; + silabs,clock-source = <2>; + }; + }; + }; -- 2.42.0