From: Ayush Singh <ayushdevel1325@gmail.com>
To: greybus-dev@lists.linaro.org
Cc: Ayush Singh <ayushdevel1325@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
gregkh@linuxfoundation.org, vaishnav@beagleboard.org,
jkridner@beagleboard.org, nm@ti.com,
krzysztof.kozlowski+dt@linaro.org
Subject: [PATCH v7 0/3] greybus: Add BeaglePlay Greybus Driver
Date: Thu, 5 Oct 2023 00:16:35 +0530 [thread overview]
Message-ID: <20231004184639.462510-1-ayushdevel1325@gmail.com> (raw)
BeagleConnect is both a technology concept and a line of board designs
that implement the technology. Born from Greybus, a mechanism for
dynamically extending a Linux system with embedded peripherals,
BeagleConnect adds two key elements: a 6LoWPAN transport and mikroBUS
manifests. The 6LoWPAN transport provides for arbitrary connections,
including the IEEE802.15.4g long-range wireless transport supported
between BeaglePlay and BeagleConnect Freedom (the first BeagleConnect
board design). The mikroBUS manifests provide for rapid prototyping
and low-node-count production with sensor boards following the
mikroBUS freely-licensable embedded bus standard such that existing
Linux drivers can be loaded upon Greybus discovery of the nodes.
This patch set provides the Linux-side hooks required for the 6LoWPAN
transport for BeagleConnect on BeaglePlay. Also adds required devicetree
additions.
Tested over `next-20230825`.
Link: https://programmershideaway.xyz/tags/gsoc23/ GSoC23 Blog
Link: https://git.beagleboard.org/gsoc/greybus/cc1352-firmware Zephyr App
Link: https://github.com/Ayush1325/linux/tree/gb-beagleplay GitHub Branch
Link: https://docs.beagleboard.org/latest/boards/beagleconnect/index.html BeagleConnect
Link: https://docs.beagleboard.org/latest/boards/beagleplay/index.html BeaglePlay
Link: https://github.com/Ayush1325/linux/tree/gb-beagleplay Github Repo
Link: https://lists.linaro.org/archives/list/greybus-dev@lists.linaro.org/thread/NYA3N2JYG3WIRCDXHYINNXYOCSVYRTSF/ Patch v6
Changes in Patch v7
v6 -> v7:
- Drop speed variable
- Fix commit message
- add clock-names and descriptions
- fix power lines
v5 -> v6:
- Rename compatible to `ti,cc1352p7`
- Fix formatting
- Use kerneldoc
- Add clocks, power-gpios, reset-gpios to dt bindings
v4 -> v5:
- Move DT Bindings to net
- Rename compatible to `beagle,play-cc1352`
- Expose CC1352 as MCU
- Remove redundant tracing messages
- Fix memory leaks
v3 -> v4:
- Add DT Bindings
- Reorder commits
- Improve commit messages
v2 -> v3:
- Move gb-beagleplay out of staging
v1 -> v2:
- Combine the driver into a single file
- Remove redundant code
- Fix Checkpatch complaints
- Other suggested changes
Ayush Singh (3):
dt-bindings: net: Add ti,cc1352p7
greybus: Add BeaglePlay Linux Driver
dts: ti: k3-am625-beagleplay: Add beaglecc1352
.../devicetree/bindings/net/ti,cc1352p7.yaml | 51 ++
MAINTAINERS | 7 +
.../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 4 +
drivers/greybus/Kconfig | 10 +
drivers/greybus/Makefile | 2 +
drivers/greybus/gb-beagleplay.c | 501 ++++++++++++++++++
6 files changed, 575 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
create mode 100644 drivers/greybus/gb-beagleplay.c
base-commit: 6269320850097903b30be8f07a5c61d9f7592393
--
2.41.0
next reply other threads:[~2023-10-04 18:46 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-04 18:46 Ayush Singh [this message]
2023-10-04 18:46 ` [PATCH v7 1/3] dt-bindings: net: Add ti,cc1352p7 Ayush Singh
2023-10-05 8:01 ` Krzysztof Kozlowski
2023-10-05 8:21 ` Ayush Singh
2023-10-05 8:37 ` Krzysztof Kozlowski
2023-10-05 11:19 ` Nishanth Menon
2023-10-04 18:46 ` [PATCH v7 2/3] greybus: Add BeaglePlay Linux Driver Ayush Singh
2023-10-05 9:08 ` Greg KH
2023-10-05 9:48 ` Ayush Singh
2023-10-05 10:39 ` Greg KH
2023-10-04 18:46 ` [PATCH v7 3/3] dts: ti: k3-am625-beagleplay: Add beaglecc1352 Ayush Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231004184639.462510-1-ayushdevel1325@gmail.com \
--to=ayushdevel1325@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=greybus-dev@lists.linaro.org \
--cc=jkridner@beagleboard.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=vaishnav@beagleboard.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).