From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V2 1/4] arm64: dts: imx8mm-beacon: Migrate sound card to simple-audio-card
Date: Wed, 4 Oct 2023 18:46:54 -0500 [thread overview]
Message-ID: <20231004234657.44592-1-aford173@gmail.com> (raw)
Instead of using a custom glue layer connecting the wm8962 CODEC
to the SAI3 sound-dai, migrate the sound card to simple-audio-card.
This also brings this board in line with the imx8mn-beacon and
imx8mp-beacon.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2: No Change
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index b10e2a703a44..313e93663d6f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -98,18 +98,30 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
enable-active-high;
};
- sound {
- compatible = "fsl,imx-audio-wm8962";
- model = "wm8962-audio";
- audio-cpu = <&sai3>;
- audio-codec = <&wm8962>;
- audio-routing =
- "Headphone Jack", "HPOUTL",
- "Headphone Jack", "HPOUTR",
- "Ext Spk", "SPKOUTL",
- "Ext Spk", "SPKOUTR",
- "AMIC", "MICBIAS",
- "IN3R", "AMIC";
+ sound-wm8962 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "wm8962";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets = "Headphone", "Headphones",
+ "Microphone", "Headset Mic",
+ "Speaker", "Speaker";
+ simple-audio-card,routing = "Headphones", "HPOUTL",
+ "Headphones", "HPOUTR",
+ "Speaker", "SPKOUTL",
+ "Speaker", "SPKOUTR",
+ "Headset Mic", "MICBIAS",
+ "IN3R", "Headset Mic";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8962>;
+ clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+ frame-master;
+ bitclock-master;
+ };
};
};
@@ -192,6 +204,7 @@ wm8962: audio-codec@1a {
0x0000 /* 4:FN_DMICCDAT */
0x0000 /* 5:Default */
>;
+ #sound-dai-cells = <0>;
};
pca6416_0: gpio@20 {
--
2.40.1
next reply other threads:[~2023-10-04 23:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-04 23:46 Adam Ford [this message]
2023-10-04 23:46 ` [PATCH V2 2/4] arm64: dts: imx8mm-beacon: Add DMIC support Adam Ford
2023-10-05 18:31 ` Fabio Estevam
2023-10-04 23:46 ` [PATCH V2 3/4] arm64: dts: imx8mn-beacon: " Adam Ford
2023-10-05 18:34 ` Fabio Estevam
2023-10-04 23:46 ` [PATCH V2 4/4] arm64: dts: imx8mp-beacon: " Adam Ford
2023-10-05 18:33 ` Fabio Estevam
2023-10-05 18:31 ` [PATCH V2 1/4] arm64: dts: imx8mm-beacon: Migrate sound card to simple-audio-card Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231004234657.44592-1-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).