From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V2 4/4] arm64: dts: imx8mp-beacon: Add DMIC support
Date: Wed, 4 Oct 2023 18:46:57 -0500 [thread overview]
Message-ID: <20231004234657.44592-4-aford173@gmail.com> (raw)
In-Reply-To: <20231004234657.44592-1-aford173@gmail.com>
The baseboard has a connector for a pulse density microphone.
This is connected via the micfil interface and uses the DMIC
audio codec with the simple-audio-card.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2: No Change
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index acd265d8b58e..ee64c6ffb551 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -49,6 +49,12 @@ ss_ep: endpoint {
};
};
+ dmic_codec: dmic-codec {
+ compatible = "dmic-codec";
+ num-channels = <1>;
+ #sound-dai-cells = <0>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
autorepeat;
@@ -147,6 +153,22 @@ reg_usb1_host_vbus: regulator-usb1-vbus {
enable-active-high;
};
+ sound-dmic {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sound-pdm";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+
+ dailink_master: simple-audio-card,cpu {
+ sound-dai = <&micfil>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&dmic_codec>;
+ };
+ };
+
sound-wm8962 {
compatible = "simple-audio-card";
simple-audio-card,name = "wm8962";
@@ -174,6 +196,11 @@ simple-audio-card,codec {
};
};
+&audio_blk_ctrl {
+ assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>, <&clk IMX8MP_AUDIO_PLL2>;
+ assigned-clock-rates = <393216000>, <135475200>;
+};
+
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
@@ -364,6 +391,15 @@ hd3ss3220_out_ep: endpoint {
};
};
+&micfil {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pdm>;
+ assigned-clocks = <&clk IMX8MP_CLK_PDM>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <49152000>;
+ status = "okay";
+};
+
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
@@ -545,6 +581,13 @@ MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x10 /* PCIe_nRST */
>;
};
+ pinctrl_pdm: pdmgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK 0xd6
+ MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00 0xd6
+ >;
+ };
+
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
--
2.40.1
next prev parent reply other threads:[~2023-10-04 23:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-04 23:46 [PATCH V2 1/4] arm64: dts: imx8mm-beacon: Migrate sound card to simple-audio-card Adam Ford
2023-10-04 23:46 ` [PATCH V2 2/4] arm64: dts: imx8mm-beacon: Add DMIC support Adam Ford
2023-10-05 18:31 ` Fabio Estevam
2023-10-04 23:46 ` [PATCH V2 3/4] arm64: dts: imx8mn-beacon: " Adam Ford
2023-10-05 18:34 ` Fabio Estevam
2023-10-04 23:46 ` Adam Ford [this message]
2023-10-05 18:33 ` [PATCH V2 4/4] arm64: dts: imx8mp-beacon: " Fabio Estevam
2023-10-05 18:31 ` [PATCH V2 1/4] arm64: dts: imx8mm-beacon: Migrate sound card to simple-audio-card Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231004234657.44592-4-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).