From: Jai Luthra <j-luthra@ti.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: <linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>,
Maxime Ripard <mripard@kernel.org>,
<niklas.soderlund+renesas@ragnatech.se>,
Benoit Parrot <bparrot@ti.com>,
Vaishnav Achath <vaishnav.a@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>, <nm@ti.com>,
<devarsht@ti.com>, <j-luthra@ti.com>, <a-bhatia1@ti.com>,
Martyn Welch <martyn.welch@collabora.com>,
Julien Massot <julien.massot@collabora.com>
Subject: [PATCH v10 05/13] media: cadence: csi2rx: Add get_fmt and set_fmt pad ops
Date: Mon, 9 Oct 2023 18:39:31 +0530 [thread overview]
Message-ID: <20231009-upstream_csi-v10-5-330aaed24c5d@ti.com> (raw)
In-Reply-To: <20231009-upstream_csi-v10-0-330aaed24c5d@ti.com>
From: Pratyush Yadav <p.yadav@ti.com>
The format is needed to calculate the link speed for the external DPHY
configuration. It is not right to query the format from the source
subdev. Add get_fmt and set_fmt pad operations so that the format can be
configured and correct bpp be selected.
Initialize and use the v4l2 subdev active state to keep track of the
active formats. Also propagate the new format from the sink pad to all
the source pads.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Co-developed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
---
Changes in v10:
- Remove redundant checks in set_fmt() as we ensure pad is SINK
drivers/media/platform/cadence/cdns-csi2rx.c | 96 +++++++++++++++++++++++++++-
1 file changed, 95 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
index 399b2f800dc4..f9b41451f4a4 100644
--- a/drivers/media/platform/cadence/cdns-csi2rx.c
+++ b/drivers/media/platform/cadence/cdns-csi2rx.c
@@ -61,6 +61,11 @@ enum csi2rx_pads {
CSI2RX_PAD_MAX,
};
+struct csi2rx_fmt {
+ u32 code;
+ u8 bpp;
+};
+
struct csi2rx_priv {
struct device *dev;
unsigned int count;
@@ -95,6 +100,32 @@ struct csi2rx_priv {
int source_pad;
};
+static const struct csi2rx_fmt formats[] = {
+ { .code = MEDIA_BUS_FMT_YUYV8_1X16, .bpp = 16, },
+ { .code = MEDIA_BUS_FMT_UYVY8_1X16, .bpp = 16, },
+ { .code = MEDIA_BUS_FMT_YVYU8_1X16, .bpp = 16, },
+ { .code = MEDIA_BUS_FMT_VYUY8_1X16, .bpp = 16, },
+ { .code = MEDIA_BUS_FMT_SBGGR8_1X8, .bpp = 8, },
+ { .code = MEDIA_BUS_FMT_SGBRG8_1X8, .bpp = 8, },
+ { .code = MEDIA_BUS_FMT_SGRBG8_1X8, .bpp = 8, },
+ { .code = MEDIA_BUS_FMT_SRGGB8_1X8, .bpp = 8, },
+ { .code = MEDIA_BUS_FMT_SBGGR10_1X10, .bpp = 10, },
+ { .code = MEDIA_BUS_FMT_SGBRG10_1X10, .bpp = 10, },
+ { .code = MEDIA_BUS_FMT_SGRBG10_1X10, .bpp = 10, },
+ { .code = MEDIA_BUS_FMT_SRGGB10_1X10, .bpp = 10, },
+};
+
+static const struct csi2rx_fmt *csi2rx_get_fmt_by_code(u32 code)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(formats); i++)
+ if (formats[i].code == code)
+ return &formats[i];
+
+ return NULL;
+}
+
static inline
struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev)
{
@@ -303,12 +334,68 @@ static int csi2rx_s_stream(struct v4l2_subdev *subdev, int enable)
return ret;
}
+static int csi2rx_set_fmt(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_format *format)
+{
+ struct v4l2_mbus_framefmt *fmt;
+ unsigned int i;
+
+ /* No transcoding, source and sink formats must match. */
+ if (format->pad != CSI2RX_PAD_SINK)
+ return v4l2_subdev_get_fmt(subdev, state, format);
+
+ if (!csi2rx_get_fmt_by_code(format->format.code))
+ format->format.code = formats[0].code;
+
+ format->format.field = V4L2_FIELD_NONE;
+
+ /* Set sink format */
+ fmt = v4l2_subdev_get_pad_format(subdev, state, format->pad);
+ *fmt = format->format;
+
+ /* Propagate to source formats */
+ for (i = CSI2RX_PAD_SOURCE_STREAM0; i < CSI2RX_PAD_MAX; i++) {
+ fmt = v4l2_subdev_get_pad_format(subdev, state, i);
+ *fmt = format->format;
+ }
+
+ return 0;
+}
+
+static int csi2rx_init_cfg(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_state *state)
+{
+ struct v4l2_subdev_format format = {
+ .pad = CSI2RX_PAD_SINK,
+ .format = {
+ .width = 640,
+ .height = 480,
+ .code = MEDIA_BUS_FMT_UYVY8_1X16,
+ .field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .ycbcr_enc = V4L2_YCBCR_ENC_601,
+ .quantization = V4L2_QUANTIZATION_LIM_RANGE,
+ .xfer_func = V4L2_XFER_FUNC_SRGB,
+ },
+ };
+
+ return csi2rx_set_fmt(subdev, state, &format);
+}
+
+static const struct v4l2_subdev_pad_ops csi2rx_pad_ops = {
+ .get_fmt = v4l2_subdev_get_fmt,
+ .set_fmt = csi2rx_set_fmt,
+ .init_cfg = csi2rx_init_cfg,
+};
+
static const struct v4l2_subdev_video_ops csi2rx_video_ops = {
.s_stream = csi2rx_s_stream,
};
static const struct v4l2_subdev_ops csi2rx_subdev_ops = {
.video = &csi2rx_video_ops,
+ .pad = &csi2rx_pad_ops,
};
static int csi2rx_async_bound(struct v4l2_async_notifier *notifier,
@@ -532,9 +619,13 @@ static int csi2rx_probe(struct platform_device *pdev)
if (ret)
goto err_cleanup;
+ ret = v4l2_subdev_init_finalize(&csi2rx->subdev);
+ if (ret)
+ goto err_cleanup;
+
ret = v4l2_async_register_subdev(&csi2rx->subdev);
if (ret < 0)
- goto err_cleanup;
+ goto err_free_state;
dev_info(&pdev->dev,
"Probed CSI2RX with %u/%u lanes, %u streams, %s D-PHY\n",
@@ -544,6 +635,8 @@ static int csi2rx_probe(struct platform_device *pdev)
return 0;
+err_free_state:
+ v4l2_subdev_cleanup(&csi2rx->subdev);
err_cleanup:
v4l2_async_nf_unregister(&csi2rx->notifier);
v4l2_async_nf_cleanup(&csi2rx->notifier);
@@ -560,6 +653,7 @@ static void csi2rx_remove(struct platform_device *pdev)
v4l2_async_nf_unregister(&csi2rx->notifier);
v4l2_async_nf_cleanup(&csi2rx->notifier);
v4l2_async_unregister_subdev(&csi2rx->subdev);
+ v4l2_subdev_cleanup(&csi2rx->subdev);
media_entity_cleanup(&csi2rx->subdev.entity);
kfree(csi2rx);
}
--
2.42.0
next prev parent reply other threads:[~2023-10-09 13:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-09 13:09 [PATCH v10 00/13] CSI2RX support on J721E and AM62 Jai Luthra
2023-10-09 13:09 ` [PATCH v10 01/13] media: dt-bindings: Make sure items in data-lanes are unique Jai Luthra
2023-10-09 13:09 ` [PATCH v10 02/13] media: dt-bindings: cadence-csi2rx: Add TI compatible string Jai Luthra
2023-10-09 13:09 ` [PATCH v10 03/13] media: cadence: csi2rx: Unregister v4l2 async notifier Jai Luthra
2023-10-09 13:09 ` [PATCH v10 04/13] media: cadence: csi2rx: Cleanup media entity properly Jai Luthra
2023-10-09 13:09 ` Jai Luthra [this message]
2023-10-09 13:09 ` [PATCH v10 06/13] media: cadence: csi2rx: Configure DPHY using link freq Jai Luthra
2023-10-09 13:09 ` [PATCH v10 07/13] media: cadence: csi2rx: Soft reset the streams before starting capture Jai Luthra
2023-10-09 13:09 ` [PATCH v10 08/13] media: cadence: csi2rx: Set the STOP bit when stopping a stream Jai Luthra
2023-10-09 13:09 ` [PATCH v10 09/13] media: cadence: csi2rx: Fix stream data configuration Jai Luthra
2023-10-09 13:09 ` [PATCH v10 10/13] media: cadence: csi2rx: Populate subdev devnode Jai Luthra
2023-10-09 13:09 ` [PATCH v10 11/13] media: cadence: csi2rx: Add link validation Jai Luthra
2023-10-09 13:09 ` [PATCH v10 12/13] media: dt-bindings: Add TI J721E CSI2RX Jai Luthra
2023-10-09 13:09 ` [PATCH v10 13/13] media: ti: Add CSI2RX support for J721E Jai Luthra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231009-upstream_csi-v10-5-330aaed24c5d@ti.com \
--to=j-luthra@ti.com \
--cc=a-bhatia1@ti.com \
--cc=bparrot@ti.com \
--cc=conor+dt@kernel.org \
--cc=devarsht@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=julien.massot@collabora.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martyn.welch@collabora.com \
--cc=mchehab+samsung@kernel.org \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=vaishnav.a@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).