devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jian Yang <jian.yang@mediatek.com>
To: "Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Matthias Brugger" <matthias.bgg@gmail.com>,
	"Jianjun Wang" <jianjun.wang@mediatek.com>,
	"Rob Herring" <robh@kernel.org>
Cc: <linux-pci@vger.kernel.org>, <linux-mediatek@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>,
	<Chuanjia.Liu@mediatek.com>, <Jieyy.Yang@mediatek.com>,
	<Qizhong.Cheng@mediatek.com>, jian.yang <jian.yang@mediatek.com>
Subject: [PATCH v3 2/2] PCI: mediatek-gen3: Add power and reset control feature for downstream component
Date: Mon, 9 Oct 2023 16:49:57 +0800	[thread overview]
Message-ID: <20231009084957.18536-3-jian.yang@mediatek.com> (raw)
In-Reply-To: <20231009084957.18536-1-jian.yang@mediatek.com>

From: "jian.yang" <jian.yang@mediatek.com>

Make MediaTek's controller driver capable of controlling power
supplies and reset pin of a downstream component in power-on and
power-off flow.

Some downstream components (e.g., a WIFI chip) may need an extra
reset other than PERST# and their power supplies, depending on
the requirements of platform, may need to controlled by their
parent's driver. To meet the requirements described above, I add this
feature to MediaTek's PCIe controller driver as a optional feature.

Signed-off-by: jian.yang <jian.yang@mediatek.com>
---
 drivers/pci/controller/pcie-mediatek-gen3.c | 93 ++++++++++++++++++++-
 1 file changed, 92 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index e0e27645fdf4..ad4b25c34f5d 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -8,6 +8,7 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/iopoll.h>
 #include <linux/irq.h>
 #include <linux/irqchip/chained_irq.h>
@@ -20,6 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_wakeup.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 
 #include "../pci.h"
@@ -100,6 +103,13 @@
 #define PCIE_ATR_TLP_TYPE_MEM		PCIE_ATR_TLP_TYPE(0)
 #define PCIE_ATR_TLP_TYPE_IO		PCIE_ATR_TLP_TYPE(2)
 
+/* Downstream Component power supplies used by MediaTek PCIe */
+static const char *const dsc_power_supplies[] = {
+	"pcie1v8",
+	"pcie3v3",
+	"pcie12v",
+};
+
 /**
  * struct mtk_msi_set - MSI information for each set
  * @base: IO mapped register base
@@ -122,6 +132,9 @@ struct mtk_msi_set {
  * @phy: PHY controller block
  * @clks: PCIe clocks
  * @num_clks: PCIe clocks count for this port
+ * @supplies: Downstream Component power supplies
+ * @num_supplies: Downstream Component power supplies count
+ * @dsc_reset: The GPIO pin to reset Downstream component
  * @irq: PCIe controller interrupt number
  * @saved_irq_state: IRQ enable state saved at suspend time
  * @irq_lock: lock protecting IRQ register access
@@ -141,6 +154,9 @@ struct mtk_gen3_pcie {
 	struct phy *phy;
 	struct clk_bulk_data *clks;
 	int num_clks;
+	struct regulator_bulk_data *supplies;
+	int num_supplies;
+	struct gpio_desc *dsc_reset;
 
 	int irq;
 	u32 saved_irq_state;
@@ -763,7 +779,7 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)
 	struct device *dev = pcie->dev;
 	struct platform_device *pdev = to_platform_device(dev);
 	struct resource *regs;
-	int ret;
+	int ret, i;
 
 	regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcie-mac");
 	if (!regs)
@@ -809,14 +825,86 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)
 		return pcie->num_clks;
 	}
 
+	pcie->num_supplies = ARRAY_SIZE(dsc_power_supplies);
+	pcie->supplies = devm_kcalloc(dev, pcie->num_supplies,
+				      sizeof(*pcie->supplies),
+				      GFP_KERNEL);
+	if (!pcie->supplies)
+		return -ENOMEM;
+
+	for (i = 0; i < pcie->num_supplies; i++)
+		pcie->supplies[i].supply = dsc_power_supplies[i];
+
+	ret = devm_regulator_bulk_get(dev, pcie->num_supplies, pcie->supplies);
+	if (ret)
+		return ret;
+
+	pcie->dsc_reset = devm_gpiod_get_optional(dev, "dsc-reset",
+						  GPIOD_OUT_LOW);
+	if (IS_ERR(pcie->dsc_reset)) {
+		ret = PTR_ERR(pcie->dsc_reset);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to request DSC reset gpio\n");
+
+		return ret;
+	}
+
 	return 0;
 }
 
+static int mtk_pcie_dsc_power_up(struct mtk_gen3_pcie *pcie)
+{
+	struct device *dev = pcie->dev;
+	int ret;
+
+	/*
+	 * Skip downstream component's power-up flow if it was kept power-on
+	 * while system entered suspend state
+	 */
+	if (device_wakeup_path(dev))
+		return 0;
+
+	/* Assert Downstream Component reset */
+	if (pcie->dsc_reset)
+		gpiod_set_value_cansleep(pcie->dsc_reset, 1);
+
+	ret = regulator_bulk_enable(pcie->num_supplies, pcie->supplies);
+	if (ret)
+		dev_err(dev, "failed to enable DSC power supplies: %d\n", ret);
+
+	/* De-assert Downstream Component reset */
+	if (pcie->dsc_reset)
+		gpiod_set_value_cansleep(pcie->dsc_reset, 0);
+
+	return ret;
+}
+
+static void mtk_pcie_dsc_power_down(struct mtk_gen3_pcie *pcie)
+{
+	/*
+	 * Keep downstream component power-on if it need to wake up the
+	 * system in suspend state
+	 */
+	if (device_wakeup_path(pcie->dev))
+		return;
+
+	/* Assert Downstream Component reset */
+	if (pcie->dsc_reset)
+		gpiod_set_value_cansleep(pcie->dsc_reset, 1);
+
+	regulator_bulk_disable(pcie->num_supplies, pcie->supplies);
+}
+
 static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
 	int err;
 
+	/* Downstream Component power up before RC */
+	err = mtk_pcie_dsc_power_up(pcie);
+	if (err)
+		return err;
+
 	/* PHY power on and enable pipe clock */
 	reset_control_deassert(pcie->phy_reset);
 
@@ -855,6 +943,7 @@ static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)
 	phy_exit(pcie->phy);
 err_phy_init:
 	reset_control_assert(pcie->phy_reset);
+	mtk_pcie_dsc_power_down(pcie);
 
 	return err;
 }
@@ -870,6 +959,8 @@ static void mtk_pcie_power_down(struct mtk_gen3_pcie *pcie)
 	phy_power_off(pcie->phy);
 	phy_exit(pcie->phy);
 	reset_control_assert(pcie->phy_reset);
+
+	mtk_pcie_dsc_power_down(pcie);
 }
 
 static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie)
-- 
2.18.0


  parent reply	other threads:[~2023-10-09  8:50 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-09  8:49 [PATCH v3 0/2] PCI: mediatek-gen3: Support controlling power supplies Jian Yang
2023-10-09  8:49 ` [PATCH v3 1/2] dt-bindings: PCI: mediatek-gen3: Add support for controlling power and reset Jian Yang
2023-10-10  9:45   ` AngeloGioacchino Del Regno
2023-10-13  9:25     ` Jian Yang (杨戬)
2023-10-09  8:49 ` Jian Yang [this message]
2023-10-10  9:51   ` [PATCH v3 2/2] PCI: mediatek-gen3: Add power and reset control feature for downstream component AngeloGioacchino Del Regno
2023-10-13  9:43     ` Jian Yang (杨戬)
  -- strict thread matches above, loose matches on Subject: below --
2023-09-28 10:58 [PATCH v3 0/2] PCI: mediatek-gen3: Support controlling power supplies Jian Yang
2023-09-28 10:58 ` [PATCH v3 2/2] PCI: mediatek-gen3: Add power and reset control feature for downstream component Jian Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231009084957.18536-3-jian.yang@mediatek.com \
    --to=jian.yang@mediatek.com \
    --cc=Chuanjia.Liu@mediatek.com \
    --cc=Jieyy.Yang@mediatek.com \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=Qizhong.Cheng@mediatek.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jianjun.wang@mediatek.com \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).