Re: [PATCH v1 1/3] regulator: dt-bindings: fixed-regulator: Add under-voltage interrupt support

[Rob Herring <robh@kernel.org>]

On Tue, Oct 10, 2023 at 10:59:04AM +0200, Oleksij Rempel wrote:
> Add under-voltage interrupt support. This can be used with simple
> regulators having no other way to communicate an under-voltage event
> except as by toggling some GPIO line.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> 
> diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
> index ac0281b1cceb..0f8760ed2fb1 100644
> --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
> @@ -100,6 +100,14 @@ properties:
>    vin-supply:
>      description: Input supply phandle.
> 
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      Under-voltage interrupt
> +
> +  interrupt-names:
> +    const: under-voltage

No need for a name. If there's ever a 2nd, it should be a specific 
binding, not fixed-regulator.

> +
>  required:
>    - compatible
>    - regulator-name
> ---
>  .../devicetree/bindings/regulator/fixed-regulator.yaml    | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
> index ac0281b1cceb..0f8760ed2fb1 100644
> --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml

I think you've got some problems with your setup...

> @@ -100,6 +100,14 @@ properties:
>    vin-supply:
>      description: Input supply phandle.
>  
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      Under-voltage interrupt
> +
> +  interrupt-names:
> +    const: under-voltage
> +
>  required:
>    - compatible
>    - regulator-name
> -- 
> 2.39.2
>