From: Javier Martinez Canillas <javierm@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>,
Peter Robinson <pbrobinson@gmail.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
Maxime Ripard <mripard@kernel.org>,
Conor Dooley <conor@kernel.org>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Javier Martinez Canillas <javierm@redhat.com>,
Conor Dooley <conor+dt@kernel.org>,
Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v4 5/6] dt-bindings: display: Split common Solomon properties in their own schema
Date: Sat, 14 Oct 2023 09:15:07 +0200 [thread overview]
Message-ID: <20231014071520.1342189-6-javierm@redhat.com> (raw)
In-Reply-To: <20231014071520.1342189-1-javierm@redhat.com>
There are DT properties that can be shared across different Solomon OLED
Display Controller families. Split them into a separate common schema to
avoid these properties to be duplicated in different DT bindings schemas.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
---
(no changes since v3)
Changes in v3:
- Fix "No newline at end of file" in solomon,ssd-common.yaml (Rob Herring).
- Add Rob Herring's Reviewed-by tag to patch #5.
.../bindings/display/solomon,ssd-common.yaml | 42 +++++++++++++++++++
.../bindings/display/solomon,ssd1307fb.yaml | 28 +------------
MAINTAINERS | 1 +
3 files changed, 44 insertions(+), 27 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
diff --git a/Documentation/devicetree/bindings/display/solomon,ssd-common.yaml b/Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
new file mode 100644
index 000000000000..3e6998481a75
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Solomon OLED Display Controllers
+
+maintainers:
+ - Javier Martinez Canillas <javierm@redhat.com>
+
+properties:
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ # Only required for SPI
+ dc-gpios:
+ description:
+ GPIO connected to the controller's D/C# (Data/Command) pin,
+ that is needed for 4-wire SPI to tell the controller if the
+ data sent is for a command register or the display data RAM
+ maxItems: 1
+
+ solomon,height:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Height in pixel of the screen driven by the controller.
+ The default value is controller-dependent.
+
+ solomon,width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Width in pixel of the screen driven by the controller.
+ The default value is controller-dependent.
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
index 20e2bd15d4d2..3afbb52d1b7f 100644
--- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
+++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
@@ -27,38 +27,12 @@ properties:
- solomon,ssd1307
- solomon,ssd1309
- reg:
- maxItems: 1
-
pwms:
maxItems: 1
- reset-gpios:
- maxItems: 1
-
- # Only required for SPI
- dc-gpios:
- description:
- GPIO connected to the controller's D/C# (Data/Command) pin,
- that is needed for 4-wire SPI to tell the controller if the
- data sent is for a command register or the display data RAM
- maxItems: 1
-
vbat-supply:
description: The supply for VBAT
- solomon,height:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Height in pixel of the screen driven by the controller.
- The default value is controller-dependent.
-
- solomon,width:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Width in pixel of the screen driven by the controller.
- The default value is controller-dependent.
-
solomon,page-offset:
$ref: /schemas/types.yaml#/definitions/uint32
default: 1
@@ -148,7 +122,7 @@ required:
- reg
allOf:
- - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - $ref: solomon,ssd-common.yaml#
- if:
properties:
diff --git a/MAINTAINERS b/MAINTAINERS
index 987152e3be02..c63649e9ba58 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6765,6 +6765,7 @@ DRM DRIVER FOR SOLOMON SSD130X OLED DISPLAYS
M: Javier Martinez Canillas <javierm@redhat.com>
S: Maintained
T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
F: Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
F: drivers/gpu/drm/solomon/ssd130x*
--
2.41.0
next prev parent reply other threads:[~2023-10-14 7:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-14 7:15 [PATCH v4 0/6] drm/solomon: Add support for the SSD132x controller family Javier Martinez Canillas
2023-10-14 7:15 ` Javier Martinez Canillas [this message]
2023-10-14 7:15 ` [PATCH v4 6/6] dt-bindings: display: Add SSD132x OLED controllers Javier Martinez Canillas
2023-10-20 15:34 ` Rob Herring
2023-10-20 22:28 ` Javier Martinez Canillas
2023-10-18 12:35 ` [PATCH v4 0/6] drm/solomon: Add support for the SSD132x controller family Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231014071520.1342189-6-javierm@redhat.com \
--to=javierm@redhat.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=conor@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert@linux-m68k.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=pbrobinson@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).