* [PATCH v4] dt-bindings: usb: gpio-sbu-mux: Make 'mode-switch' not required
@ 2023-10-16 13:11 Fabio Estevam
0 siblings, 0 replies; only message in thread
From: Fabio Estevam @ 2023-10-16 13:11 UTC (permalink / raw)
To: gregkh
Cc: robh+dt, krzysztof.kozlowski+dt, conor+dt, andersson, linux-usb,
devicetree, Fabio Estevam, Conor Dooley
From: Fabio Estevam <festevam@denx.de>
On a i.MX8QXP MEK board that has an NXP CBDTU02043 mux, there is
no mode-switch support, only orientation switch.
Make the 'mode-switch' property a non-required one.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Changes since v3:
- Collected Conor's ack and sent it as standalone patch as the
previous patch has already been applied.
Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml | 1 -
1 file changed, 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
index b61dcf8b4aad..d3b2b666ec2a 100644
--- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
+++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
@@ -51,7 +51,6 @@ required:
- compatible
- enable-gpios
- select-gpios
- - mode-switch
- orientation-switch
- port
--
2.34.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2023-10-16 13:11 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-10-16 13:11 [PATCH v4] dt-bindings: usb: gpio-sbu-mux: Make 'mode-switch' not required Fabio Estevam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).