[PATCH net-next v5 7/9] net: dsa: microchip: Add error handling for ksz_switch_macaddr_get()

[Oleksij Rempel <o.rempel@pengutronix.de>]

Enhance the ksz_switch_macaddr_get() function to handle errors that may
occur during the call to ksz_write8(). Specifically, this update checks
the return value of ksz_write8(), which may fail if regmap ranges
validation is not passed and returns the error code.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/net/dsa/microchip/ksz_common.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 7b05de6fe987..79052a54880c 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -3612,7 +3612,7 @@ int ksz_switch_macaddr_get(struct dsa_switch *ds, int port,
 	struct ksz_switch_macaddr *switch_macaddr;
 	struct ksz_device *dev = ds->priv;
 	const u16 *regs = dev->info->regs;
-	int i;
+	int i, ret;
 
 	/* Make sure concurrent MAC address changes are blocked */
 	ASSERT_RTNL();
@@ -3639,8 +3639,11 @@ int ksz_switch_macaddr_get(struct dsa_switch *ds, int port,
 	dev->switch_macaddr = switch_macaddr;
 
 	/* Program the switch MAC address to hardware */
-	for (i = 0; i < ETH_ALEN; i++)
-		ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, addr[i]);
+	for (i = 0; i < ETH_ALEN; i++) {
+		ret = ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, addr[i]);
+		if (ret)
+			return ret;
+	}
 
 	return 0;
 }
-- 
2.39.2