From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
sboyd@kernel.org, mturquette@baylibre.com, heiko@sntech.de,
conor+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
robh+dt@kernel.org, Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH 0/3] Fixes for RGB30
Date: Wed, 18 Oct 2023 10:33:54 -0500 [thread overview]
Message-ID: <20231018153357.343142-1-macroalpha82@gmail.com> (raw)
From: Chris Morgan <macromorgan@hotmail.com>
After preliminary testing, a few users requested that I see if I can
make the panel run at precisely 60hz. As the device is typically used
for retro gaming, getting the panel to refresh as close to 60hz as
possible is important.
Additionally, I accidentially left the UART2 enabled, even though this
device does not have an exposed serial port on the board. Disable the
UART in the device tree.
This patch series applies on top of the already applied commit here:
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/commit/?h=for-next&id=1e9ac3e8a6a9d4da9efbad2d8e95cc1140e0e23f
Chris Morgan (3):
clk: rockchip: rk3568: Add PLL rate for 292.5MHz
arm64: dts: rockchip: Update VPLL Frequency for RGB30
arm64: dts: rockchip: Remove UART2 from RGB30
.../arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts | 11 ++++++++++-
drivers/clk/rockchip/clk-rk3568.c | 1 +
2 files changed, 11 insertions(+), 1 deletion(-)
--
2.34.1
next reply other threads:[~2023-10-18 15:34 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-18 15:33 Chris Morgan [this message]
2023-10-18 15:33 ` [PATCH 1/3] clk: rockchip: rk3568: Add PLL rate for 292.5MHz Chris Morgan
2023-10-18 15:33 ` [PATCH 2/3] arm64: dts: rockchip: Update VPLL Frequency for RGB30 Chris Morgan
2023-10-18 15:33 ` [PATCH 3/3] arm64: dts: rockchip: Remove UART2 from RGB30 Chris Morgan
2024-03-30 13:13 ` Ahmad Fatoum
2024-03-30 15:34 ` Chris Morgan
2024-04-02 9:27 ` Ahmad Fatoum
2023-10-19 8:54 ` [PATCH 0/3] Fixes for RGB30 Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231018153357.343142-1-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).