From: Hsin-Yi Wang <hsinyi@chromium.org>
To: Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Nícolas F . R . A . Prado" <nfraprado@collabora.com>,
"Bernhard Rosenkränzer" <bero@baylibre.com>,
"Frank Wunderlich" <frank-w@public-files.de>,
"Macpaul Lin" <macpaul.lin@mediatek.com>,
"Sean Wang" <sean.wang@mediatek.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH 6/6] arm64: dts: mt8183: Add jacuzzi pico/pico6 board
Date: Mon, 23 Oct 2023 17:02:29 -0700 [thread overview]
Message-ID: <20231024000724.57714-7-hsinyi@chromium.org> (raw)
In-Reply-To: <20231024000724.57714-1-hsinyi@chromium.org>
pico is also known as Acer Chromebook Spin 311.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
.../mediatek/mt8183-kukui-jacuzzi-pico.dts | 36 ++++++
.../mediatek/mt8183-kukui-jacuzzi-pico6.dts | 110 ++++++++++++++++++
2 files changed, 146 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
new file mode 100644
index 000000000000..e230323b3a54
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+ model = "Google pico board";
+ chassis-type = "convertible";
+ compatible = "google,pico-sku1", "google,pico", "mediatek,mt8183";
+};
+
+&i2c_tunnel {
+ google,remote-bus = <0>;
+};
+
+&i2c2 {
+ i2c-scl-internal-delay-ns = <25000>;
+
+ trackpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ hid-descr-addr = <0x20>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pins>;
+
+ interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+ wakeup-source;
+ };
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
new file mode 100644
index 000000000000..3e4bc451039e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+ model = "Google pico6 board";
+ chassis-type = "convertible";
+ compatible = "google,pico-sku2", "google,pico", "mediatek,mt8183";
+
+ bt_wakeup: bt-wakeup {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_pins_wakeup>;
+
+ wobt {
+ label = "Wake on BT";
+ gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
+};
+
+&i2c_tunnel {
+ google,remote-bus = <0>;
+};
+
+&i2c2 {
+ i2c-scl-internal-delay-ns = <25000>;
+
+ trackpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ hid-descr-addr = <0x20>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pins>;
+
+ interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+ wakeup-source;
+ };
+};
+
+&wifi_wakeup {
+ wowlan {
+ gpios = <&pio 113 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&wifi_pwrseq {
+ post-power-on-delay-ms = <50>;
+
+ /* Toggle WIFI_ENABLE to reset the chip. */
+ reset-gpios = <&pio 8 1>;
+};
+
+&wifi_pins_pwrseq {
+ pins_wifi_enable {
+ pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+ };
+};
+
+&mmc1_pins_default {
+ pins_cmd_dat {
+ drive-strength = <MTK_DRIVE_6mA>;
+ };
+ pins_clk {
+ drive-strength = <MTK_DRIVE_6mA>;
+ };
+};
+
+&mmc1_pins_uhs {
+ pins_clk {
+ drive-strength = <MTK_DRIVE_6mA>;
+ };
+};
+
+&mmc1 {
+ bt_reset: bt-reset {
+ compatible = "mediatek,mt7921s-bluetooth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_pins_reset>;
+ reset-gpios = <&pio 120 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pio {
+ bt_pins_wakeup: bt-pins-wakeup {
+ pins_bt_wakeup {
+ pinmux = <PINMUX_GPIO42__FUNC_GPIO42>;
+ input-enable;
+ };
+ };
+
+ bt_pins_reset: bt-pins-reset {
+ pins_bt_reset {
+ pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+ output-high;
+ };
+ };
+};
+
+/delete-node/ &bluetooth;
+/delete-node/ &bt_pins;
--
2.42.0.758.gaed0368e0e-goog
next prev parent reply other threads:[~2023-10-24 0:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-24 0:02 [PATCH 0/6] Add a few mt8183 follower boards Hsin-Yi Wang
2023-10-24 0:02 ` [PATCH 1/6] dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-katsu Hsin-Yi Wang
2023-10-24 15:15 ` Conor Dooley
2023-10-24 19:46 ` Hsin-Yi Wang
2023-10-24 0:02 ` [PATCH 2/6] arm64: dts: mt8183: Add kukui katsu board Hsin-Yi Wang
2023-10-24 0:02 ` [PATCH 3/6] dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-makomo Hsin-Yi Wang
2023-10-24 15:17 ` Conor Dooley
2023-10-24 18:22 ` Hsin-Yi Wang
2023-10-25 14:49 ` Conor Dooley
2023-10-25 19:33 ` Hsin-Yi Wang
2023-10-25 14:54 ` Krzysztof Kozlowski
2023-10-24 0:02 ` [PATCH 4/6] arm64: dts: mt8183: Add jacuzzi makomo board Hsin-Yi Wang
2023-10-24 15:22 ` Krzysztof Kozlowski
2023-10-24 0:02 ` [PATCH 5/6] dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-pico Hsin-Yi Wang
2023-10-24 15:13 ` Conor Dooley
2023-10-24 0:02 ` Hsin-Yi Wang [this message]
2023-10-24 15:21 ` [PATCH 6/6] arm64: dts: mt8183: Add jacuzzi pico/pico6 board Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231024000724.57714-7-hsinyi@chromium.org \
--to=hsinyi@chromium.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bero@baylibre.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=frank-w@public-files.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=macpaul.lin@mediatek.com \
--cc=matthias.bgg@gmail.com \
--cc=nfraprado@collabora.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).