From: Hsin-Yi Wang <hsinyi@chromium.org>
To: Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Nícolas F . R . A . Prado" <nfraprado@collabora.com>,
"Bernhard Rosenkränzer" <bero@baylibre.com>,
"Macpaul Lin" <macpaul.lin@mediatek.com>,
"Sean Wang" <sean.wang@mediatek.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH v3 1/7] arm64: dts: mt8183: kukui: Fix underscores in node names
Date: Wed, 25 Oct 2023 14:48:43 -0700 [thread overview]
Message-ID: <20231025215517.1388735-2-hsinyi@chromium.org> (raw)
In-Reply-To: <20231025215517.1388735-1-hsinyi@chromium.org>
Replace underscores with hyphens in pinctrl node names both for consistency
and to adhere to the bindings.
Fixes: cd894e274b74 ("arm64: dts: mt8183: Add krane-sku176 board")
Fixes: 1652dbf7363a ("arm64: dts: mt8183: add scp node")
Fixes: 27eaf34df364 ("arm64: dts: mt8183: config dsi node")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
v2->v3: Update commit message. Add Fixes tags.
---
.../dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 6 +-
.../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 94 +++++++++----------
2 files changed, 50 insertions(+), 50 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index bf97b60ae4d1..06fde1a9aab7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -441,20 +441,20 @@ pins2 {
};
touchscreen_pins: touchscreen-pins {
- touch_int_odl {
+ touch-int-odl {
pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
input-enable;
bias-pull-up;
};
- touch_rst_l {
+ touch-rst-l {
pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
output-high;
};
};
trackpad_pins: trackpad-pins {
- trackpad_int {
+ trackpad-int {
pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
input-enable;
bias-disable; /* pulled externally */
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index bf7de35ffcbc..4ff207ab1d26 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -460,7 +460,7 @@ &mt6358_vsram_gpu_reg {
&pio {
aud_pins_default: audiopins {
- pins_bus {
+ pins-bus {
pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>,
<PINMUX_GPIO98__FUNC_I2S2_BCK>,
<PINMUX_GPIO101__FUNC_I2S2_LRCK>,
@@ -482,7 +482,7 @@ pins_bus {
};
aud_pins_tdm_out_on: audiotdmouton {
- pins_bus {
+ pins-bus {
pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>,
<PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>,
<PINMUX_GPIO171__FUNC_TDM_DATA0_2ND>,
@@ -494,7 +494,7 @@ pins_bus {
};
aud_pins_tdm_out_off: audiotdmoutoff {
- pins_bus {
+ pins-bus {
pinmux = <PINMUX_GPIO169__FUNC_GPIO169>,
<PINMUX_GPIO170__FUNC_GPIO170>,
<PINMUX_GPIO171__FUNC_GPIO171>,
@@ -508,13 +508,13 @@ pins_bus {
};
bt_pins: bt-pins {
- pins_bt_en {
+ pins-bt-en {
pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
output-low;
};
};
- ec_ap_int_odl: ec_ap_int_odl {
+ ec_ap_int_odl: ec-ap-int-odl {
pins1 {
pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
input-enable;
@@ -522,7 +522,7 @@ pins1 {
};
};
- h1_int_od_l: h1_int_od_l {
+ h1_int_od_l: h1-int-od-l {
pins1 {
pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
input-enable;
@@ -530,7 +530,7 @@ pins1 {
};
i2c0_pins: i2c0 {
- pins_bus {
+ pins-bus {
pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
<PINMUX_GPIO83__FUNC_SCL0>;
mediatek,pull-up-adv = <3>;
@@ -539,7 +539,7 @@ pins_bus {
};
i2c1_pins: i2c1 {
- pins_bus {
+ pins-bus {
pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
<PINMUX_GPIO84__FUNC_SCL1>;
mediatek,pull-up-adv = <3>;
@@ -548,7 +548,7 @@ pins_bus {
};
i2c2_pins: i2c2 {
- pins_bus {
+ pins-bus {
pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
<PINMUX_GPIO104__FUNC_SDA2>;
bias-disable;
@@ -557,7 +557,7 @@ pins_bus {
};
i2c3_pins: i2c3 {
- pins_bus {
+ pins-bus {
pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
<PINMUX_GPIO51__FUNC_SDA3>;
mediatek,pull-up-adv = <3>;
@@ -566,7 +566,7 @@ pins_bus {
};
i2c4_pins: i2c4 {
- pins_bus {
+ pins-bus {
pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
<PINMUX_GPIO106__FUNC_SDA4>;
bias-disable;
@@ -575,7 +575,7 @@ pins_bus {
};
i2c5_pins: i2c5 {
- pins_bus {
+ pins-bus {
pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
<PINMUX_GPIO49__FUNC_SDA5>;
mediatek,pull-up-adv = <3>;
@@ -584,7 +584,7 @@ pins_bus {
};
i2c6_pins: i2c6 {
- pins_bus {
+ pins-bus {
pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
<PINMUX_GPIO12__FUNC_SDA6>;
bias-disable;
@@ -592,7 +592,7 @@ pins_bus {
};
mmc0_pins_default: mmc0-pins-default {
- pins_cmd_dat {
+ pins-cmd-dat {
pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
<PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
<PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
@@ -607,13 +607,13 @@ pins_cmd_dat {
mediatek,pull-up-adv = <01>;
};
- pins_clk {
+ pins-clk {
pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
drive-strength = <MTK_DRIVE_14mA>;
mediatek,pull-down-adv = <10>;
};
- pins_rst {
+ pins-rst {
pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
drive-strength = <MTK_DRIVE_14mA>;
mediatek,pull-down-adv = <01>;
@@ -621,7 +621,7 @@ pins_rst {
};
mmc0_pins_uhs: mmc0-pins-uhs {
- pins_cmd_dat {
+ pins-cmd-dat {
pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
<PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
<PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
@@ -636,19 +636,19 @@ pins_cmd_dat {
mediatek,pull-up-adv = <01>;
};
- pins_clk {
+ pins-clk {
pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
drive-strength = <MTK_DRIVE_14mA>;
mediatek,pull-down-adv = <10>;
};
- pins_ds {
+ pins-ds {
pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
drive-strength = <MTK_DRIVE_14mA>;
mediatek,pull-down-adv = <10>;
};
- pins_rst {
+ pins-rst {
pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
drive-strength = <MTK_DRIVE_14mA>;
mediatek,pull-up-adv = <01>;
@@ -656,7 +656,7 @@ pins_rst {
};
mmc1_pins_default: mmc1-pins-default {
- pins_cmd_dat {
+ pins-cmd-dat {
pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
<PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
<PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
@@ -666,7 +666,7 @@ pins_cmd_dat {
mediatek,pull-up-adv = <10>;
};
- pins_clk {
+ pins-clk {
pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
input-enable;
mediatek,pull-down-adv = <10>;
@@ -674,7 +674,7 @@ pins_clk {
};
mmc1_pins_uhs: mmc1-pins-uhs {
- pins_cmd_dat {
+ pins-cmd-dat {
pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
<PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
<PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
@@ -685,7 +685,7 @@ pins_cmd_dat {
mediatek,pull-up-adv = <10>;
};
- pins_clk {
+ pins-clk {
pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
drive-strength = <MTK_DRIVE_8mA>;
mediatek,pull-down-adv = <10>;
@@ -693,15 +693,15 @@ pins_clk {
};
};
- panel_pins_default: panel_pins_default {
- panel_reset {
+ panel_pins_default: panel-pins-default {
+ panel-reset {
pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
output-low;
bias-pull-up;
};
};
- pwm0_pin_default: pwm0_pin_default {
+ pwm0_pin_default: pwm0-pin-default {
pins1 {
pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
output-high;
@@ -713,14 +713,14 @@ pins2 {
};
scp_pins: scp {
- pins_scp_uart {
+ pins-scp-uart {
pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
<PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
};
};
spi0_pins: spi0 {
- pins_spi {
+ pins-spi {
pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
<PINMUX_GPIO86__FUNC_GPIO86>,
<PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -730,7 +730,7 @@ pins_spi {
};
spi1_pins: spi1 {
- pins_spi {
+ pins-spi {
pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
<PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
<PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -740,20 +740,20 @@ pins_spi {
};
spi2_pins: spi2 {
- pins_spi {
+ pins-spi {
pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
<PINMUX_GPIO1__FUNC_SPI2_MO>,
<PINMUX_GPIO2__FUNC_SPI2_CLK>;
bias-disable;
};
- pins_spi_mi {
+ pins-spi-mi {
pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
mediatek,pull-down-adv = <00>;
};
};
spi3_pins: spi3 {
- pins_spi {
+ pins-spi {
pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
<PINMUX_GPIO22__FUNC_SPI3_CSB>,
<PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -763,7 +763,7 @@ pins_spi {
};
spi4_pins: spi4 {
- pins_spi {
+ pins-spi {
pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
<PINMUX_GPIO18__FUNC_SPI4_CSB>,
<PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -773,7 +773,7 @@ pins_spi {
};
spi5_pins: spi5 {
- pins_spi {
+ pins-spi {
pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
<PINMUX_GPIO14__FUNC_SPI5_CSB>,
<PINMUX_GPIO15__FUNC_SPI5_MO>,
@@ -783,63 +783,63 @@ pins_spi {
};
uart0_pins_default: uart0-pins-default {
- pins_rx {
+ pins-rx {
pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
input-enable;
bias-pull-up;
};
- pins_tx {
+ pins-tx {
pinmux = <PINMUX_GPIO96__FUNC_UTXD0>;
};
};
uart1_pins_default: uart1-pins-default {
- pins_rx {
+ pins-rx {
pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
input-enable;
bias-pull-up;
};
- pins_tx {
+ pins-tx {
pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
};
- pins_rts {
+ pins-rts {
pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
output-enable;
};
- pins_cts {
+ pins-cts {
pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
input-enable;
};
};
uart1_pins_sleep: uart1-pins-sleep {
- pins_rx {
+ pins-rx {
pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
input-enable;
bias-pull-up;
};
- pins_tx {
+ pins-tx {
pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
};
- pins_rts {
+ pins-rts {
pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
output-enable;
};
- pins_cts {
+ pins-cts {
pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
input-enable;
};
};
wifi_pins_pwrseq: wifi-pins-pwrseq {
- pins_wifi_enable {
+ pins-wifi-enable {
pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
output-low;
};
};
wifi_pins_wakeup: wifi-pins-wakeup {
- pins_wifi_wakeup {
+ pins-wifi-wakeup {
pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
input-enable;
};
--
2.42.0.758.gaed0368e0e-goog
next prev parent reply other threads:[~2023-10-25 21:55 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-25 21:48 [PATCH v3 0/7] Add a few mt8183 follower boards Hsin-Yi Wang
2023-10-25 21:48 ` Hsin-Yi Wang [this message]
2023-10-26 8:13 ` [PATCH v3 1/7] arm64: dts: mt8183: kukui: Fix underscores in node names AngeloGioacchino Del Regno
2023-10-25 21:48 ` [PATCH v3 2/7] dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-katsu Hsin-Yi Wang
2023-10-26 14:32 ` Conor Dooley
2023-10-25 21:48 ` [PATCH v3 3/7] arm64: dts: mt8183: Add kukui katsu board Hsin-Yi Wang
2023-10-25 21:48 ` [PATCH v3 4/7] dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-makomo Hsin-Yi Wang
2023-10-26 12:38 ` Rob Herring
2023-10-26 14:36 ` Conor Dooley
2023-10-25 21:48 ` [PATCH v3 5/7] arm64: dts: mt8183: Add jacuzzi makomo board Hsin-Yi Wang
2023-10-25 21:48 ` [PATCH v3 6/7] dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-pico Hsin-Yi Wang
2023-10-25 21:48 ` [PATCH v3 7/7] arm64: dts: mt8183: Add jacuzzi pico/pico6 board Hsin-Yi Wang
2023-10-26 8:19 ` [PATCH v3 0/7] Add a few mt8183 follower boards AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231025215517.1388735-2-hsinyi@chromium.org \
--to=hsinyi@chromium.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bero@baylibre.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=macpaul.lin@mediatek.com \
--cc=matthias.bgg@gmail.com \
--cc=nfraprado@collabora.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).