devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kris Chaplin <kris.chaplin@amd.com>
To: <kris.chaplin@amd.com>, <thomas.delev@amd.com>,
	<michal.simek@amd.com>, <krzysztof.kozlowski@linaro.org>,
	<robh+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<git@amd.com>
Subject: [RESEND v2 1/2] dt-bindings: w1: Add YAML DT schema for AMD AXI w1 host and MAINTAINERS entry
Date: Thu, 26 Oct 2023 02:28:41 -0700	[thread overview]
Message-ID: <20231026093029.3122573-2-kris.chaplin@amd.com> (raw)
In-Reply-To: <20231026093029.3122573-1-kris.chaplin@amd.com>

Add YAML DT schema for the AMD AXI w1 host IP.

This hardware guarantees protocol timing for driving off-board devices such
as thermal sensors, proms, etc using the 1wire protocol.

Add MAINTAINERS entry for DT schema.

Co-developed-by: Thomas Delev <thomas.delev@amd.com>
Signed-off-by: Thomas Delev <thomas.delev@amd.com>
Signed-off-by: Kris Chaplin <kris.chaplin@amd.com>
---
 .../bindings/w1/amd,axi-1wire-host.yaml       | 44 +++++++++++++++++++
 MAINTAINERS                                   |  7 +++
 2 files changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml

diff --git a/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml b/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
new file mode 100644
index 000000000000..ef70fa2c0c5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/amd,axi-1wire-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD AXI 1-wire bus host for programmable logic
+
+maintainers:
+  - Kris Chaplin <kris.chaplin@amd.com>
+
+properties:
+  compatible:
+    const: amd,axi-1wire-host
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    onewire@a0000000 {
+        compatible = "amd,axi-1wire-host";
+        reg = <0xa0000000 0x10000>;
+        clocks = <&zynqmp_clk 0x47>;
+        interrupts = <GIC_SPI 0x59 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 7a7bd8bd80e9..3dacb7ed6e3b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -890,6 +890,13 @@ Q:	https://patchwork.kernel.org/project/linux-rdma/list/
 F:	drivers/infiniband/hw/efa/
 F:	include/uapi/rdma/efa-abi.h
 
+AMD AXI W1 DRIVER
+M:	Kris Chaplin <kris.chaplin@amd.com>
+R:	Thomas Delev <thomas.delev@amd.com>
+R:	Michal Simek <michal.simek@amd.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
+
 AMD CDX BUS DRIVER
 M:	Nipun Gupta <nipun.gupta@amd.com>
 M:	Nikhil Agarwal <nikhil.agarwal@amd.com>
-- 
2.42.GIT


  reply	other threads:[~2023-10-26  9:31 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-26  9:28 [RESEND v2 0/2] w1: Add AXI 1-wire host driver for AMD programmable logic IP core Kris Chaplin
2023-10-26  9:28 ` Kris Chaplin [this message]
2023-10-30 15:40   ` [RESEND v2 1/2] dt-bindings: w1: Add YAML DT schema for AMD AXI w1 host and MAINTAINERS entry Rob Herring
2023-10-30 15:52     ` Kris Chaplin
2023-10-30 16:02     ` Krzysztof Kozlowski
     [not found]     ` <df37f8db-a8c7-4a99-8828-3cb123afed1d@amd.com>
2023-10-30 16:19       ` Rob Herring
2023-10-30 16:32         ` Kris Chaplin
2023-10-26  9:28 ` [RESEND v2 2/2] w1: Add AXI 1-wire host driver for AMD programmable logic IP core Kris Chaplin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231026093029.3122573-2-kris.chaplin@amd.com \
    --to=kris.chaplin@amd.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=git@amd.com \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@amd.com \
    --cc=robh+dt@kernel.org \
    --cc=thomas.delev@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).