devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <mani@kernel.org>
To: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Cc: agross@kernel.org, andersson@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
	konrad.dybcio@linaro.org, quic_shazhuss@quicinc.com,
	quic_nitegupt@quicinc.com, quic_ramkri@quicinc.com,
	quic_nayiluri@quicinc.com, dmitry.baryshkov@linaro.org,
	robh@kernel.org, quic_krichai@quicinc.com,
	quic_vbadigan@quicinc.com, quic_parass@quicinc.com,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Vinod Koul" <vkoul@kernel.org>,
	linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	mhi@lists.linux.dev, linux-phy@lists.infradead.org
Subject: Re: [PATCH v3 2/5] PCI: qcom-ep: Add support for SA8775P SOC
Date: Fri, 27 Oct 2023 18:01:25 +0530	[thread overview]
Message-ID: <20231027123125.GC17527@thinkpad> (raw)
In-Reply-To: <23f3f2a8-dcbd-6764-195b-49bcec451084@quicinc.com>

On Thu, Oct 26, 2023 at 12:29:30PM +0530, Mrinmay Sarkar wrote:
> 
> On 10/26/2023 11:40 AM, Manivannan Sadhasivam wrote:
> > On Thu, Oct 26, 2023 at 11:08:03AM +0530, Mrinmay Sarkar wrote:
> > > On 10/25/2023 1:23 PM, Manivannan Sadhasivam wrote:
> > > > On Thu, Oct 19, 2023 at 05:07:07PM +0530, Mrinmay Sarkar wrote:
> > > > > Add support for SA8775P SoC to the Qualcomm PCIe Endpoint Controller
> > > > > driver. There will be some change specific to SA8775P so adding new
> > > > > compatible string.
> > > > > 
> > > > What are those specific changes?
> > > > 
> > > > - Mani
> > > Need to enable cache snooping logic for SA8775P only.
> > > 
> > Then you can add the compatible to the driver at that time and use the fallback
> > till then i.e., just document the SA8775P compatible in bindings and use both
> > SA8775P and SM8450 compatibles in the dts where the latter will act as a
> > fallback.
> > 
> > - Mani
> 
> I am getting below error in dtb checking if I add SM8450 as fallback
> compatible in dtsi. As both has different set of clocks.
> 

Ok. I didn't realize that the clocks are different. In that case, you need to
mention it in the commit message to make it clear and introduce a new
compatible.

- Mani

> //local/mnt/workspace/Mrinmay/new_lemans/next-20231018/linux-next/out/arch/arm64/boot/dts/qcom/sa8775p-ride.dtb:
> pcie-ep@1c00000: compatible: 'oneOf' conditional failed, one must be
> fixed://
> //        ['qcom,sa8775p-pcie-ep', 'qcom,sm8450-pcie-ep'] is too long//
> //        'qcom,sdx65-pcie-ep' was expected//
> //        'qcom,sdx55-pcie-ep' was expected//
> //        from schema $id:
> http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#//
> ///local/mnt/workspace/Mrinmay/new_lemans/next-20231018/linux-next/out/arch/arm64/boot/dts/qcom/sa8775p-ride.dtb:
> pcie-ep@1c00000: clocks: [[31, 66], [31, 68], [31, 69], [31, 78], [31, 79]]
> is too short//
> //        from schema $id:
> http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#//
> ///local/mnt/workspace/Mrinmay/new_lemans/next-20231018/linux-next/out/arch/arm64/boot/dts/qcom/sa8775p-ride.dtb:
> pcie-ep@1c00000: clock-names: ['aux', 'cfg', 'bus_master', 'bus_slave',
> 'slave_q2a'] is too short/
> 
> > > --Mrinmay
> > > 
> > > > > Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
> > > > > ---
> > > > >    drivers/pci/controller/dwc/pcie-qcom-ep.c | 1 +
> > > > >    1 file changed, 1 insertion(+)
> > > > > 
> > > > > diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> > > > > index 32c8d9e..4c01c34 100644
> > > > > --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
> > > > > +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> > > > > @@ -858,6 +858,7 @@ static void qcom_pcie_ep_remove(struct platform_device *pdev)
> > > > >    }
> > > > >    static const struct of_device_id qcom_pcie_ep_match[] = {
> > > > > +	{ .compatible = "qcom,sa8775p-pcie-ep", },
> > > > >    	{ .compatible = "qcom,sdx55-pcie-ep", },
> > > > >    	{ .compatible = "qcom,sm8450-pcie-ep", },
> > > > >    	{ }
> > > > > -- 
> > > > > 2.7.4
> > > > > 

-- 
மணிவண்ணன் சதாசிவம்

  reply	other threads:[~2023-10-27 12:31 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-19 11:37 [PATCH v3 0/5] arm64: qcom: sa8775p: add support for EP PCIe Mrinmay Sarkar
2023-10-19 11:37 ` [PATCH v3 1/5] dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC Mrinmay Sarkar
2023-10-19 12:48   ` Krzysztof Kozlowski
2023-10-19 11:37 ` [PATCH v3 2/5] PCI: qcom-ep: Add support for SA8775P SOC Mrinmay Sarkar
2023-10-25  7:53   ` Manivannan Sadhasivam
2023-10-26  5:38     ` Mrinmay Sarkar
2023-10-26  6:10       ` Manivannan Sadhasivam
2023-10-26  6:59         ` Mrinmay Sarkar
2023-10-27 12:31           ` Manivannan Sadhasivam [this message]
2023-10-19 11:37 ` [PATCH v3 3/5] phy: qcom-qmp-pcie: add endpoint support for sa8775p Mrinmay Sarkar
2023-10-19 13:11   ` Dmitry Baryshkov
2023-10-19 11:37 ` [PATCH v3 4/5] PCI: epf-mhi: Add support for SA8775P Mrinmay Sarkar
2023-10-25  7:56   ` Manivannan Sadhasivam
2023-10-26  5:30     ` Mrinmay Sarkar
2023-10-26  6:11       ` Manivannan Sadhasivam
2023-10-26 11:10       ` Konrad Dybcio
2023-10-26 11:34         ` Mrinmay Sarkar
2023-10-27 12:27         ` Manivannan Sadhasivam
2023-10-19 11:37 ` [PATCH v3 5/5] arm64: dts: qcom: sa8775p: Add ep pcie0 controller node Mrinmay Sarkar
2023-10-25  7:52   ` Manivannan Sadhasivam
2023-10-26  5:33     ` Mrinmay Sarkar
2023-10-26  6:07     ` Mrinmay Sarkar
2023-10-23  6:29 ` (subset) [PATCH v3 0/5] arm64: qcom: sa8775p: add support for EP PCIe Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231027123125.GC17527@thinkpad \
    --to=mani@kernel.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=kishon@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kw@linux.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lpieralisi@kernel.org \
    --cc=mhi@lists.linux.dev \
    --cc=quic_krichai@quicinc.com \
    --cc=quic_msarkar@quicinc.com \
    --cc=quic_nayiluri@quicinc.com \
    --cc=quic_nitegupt@quicinc.com \
    --cc=quic_parass@quicinc.com \
    --cc=quic_ramkri@quicinc.com \
    --cc=quic_shazhuss@quicinc.com \
    --cc=quic_vbadigan@quicinc.com \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).