From: jrodrigues <jrodrigues@ubimet.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, jrodrigues@ubimet.com
Subject: [PATCH] ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)
Date: Fri, 27 Oct 2023 21:15:48 +0200 [thread overview]
Message-ID: <20231027211548.21a6cee7@pcn112> (raw)
TQMa7x (revision 01xxx) uses a different (LM75A) temperature sensor.
The two sensors use different I2C address, so we can set both sensors
simultaneously.
Signed-off-by: João Rodrigues <jrodrigues@ubimet.com>
---
arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index fe42b0a468..b87560d037 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -128,7 +128,14 @@ vgen6_reg: vldo4 {
};
};
- /* NXP SE97BTP with temperature sensor + eeprom */
+ /* LM75A - temperature sensor, TQMa7x 01xx */
+ lm75a: temperature-sensor@48 {
+ compatible = "national,lm75a";
+ reg = <0x48>;
+ status = "okay";
+ };
+
+ /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
se97b: temperature-sensor-eeprom@1e {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x1e>;
--
The differences in the ICs are shown here:
The TQMa7 manual only references the latest version
https://www.tq-group.com/filedownloads/files/products/embedded/manuals/arm/embedded-modul/TQ-Socket/TQMa7x/TQMa7x.UM.0203.pdf
in section 3.2.4, while the board manual
https://www.tq-group.com/filedownloads/files/products/embedded/manuals/arm/carrierboard/MBa7x/MBa7x.UM.0101.pdf
in section 4.1.2 references the old version, introduced by this patch.
I have tested this change in a board which uses the TQMa7x
module, and with this patch we always a temperature sensors available.
Best regards,
--
João Rodrigues <jrodrigues@ubimet.com>
next reply other threads:[~2023-10-27 19:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-27 19:15 jrodrigues [this message]
2023-10-29 8:13 ` [PATCH] ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx) Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231027211548.21a6cee7@pcn112 \
--to=jrodrigues@ubimet.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).