From: Conor Dooley <conor@kernel.org>
To: Dmitry Rokosov <ddrokosov@salutedevices.com>
Cc: Rob Herring <robh@kernel.org>,
linux-leds@vger.kernel.org, lee@kernel.org,
linux-kernel@vger.kernel.org, kernel@sberdevices.ru,
andy.shevchenko@gmail.com, conor+dt@kernel.org, pavel@ucw.cz,
krzysztof.kozlowski+dt@linaro.org, rockosov@gmail.com,
robh+dt@kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v3 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints
Date: Thu, 2 Nov 2023 00:17:11 +0000 [thread overview]
Message-ID: <20231102-concave-untapped-804a5956faab@spud> (raw)
In-Reply-To: <20231101174422.zs5er6tqethm46ur@CAB-WSD-L081021>
[-- Attachment #1: Type: text/plain, Size: 3039 bytes --]
On Wed, Nov 01, 2023 at 08:44:22PM +0300, Dmitry Rokosov wrote:
> Hello Conor,
>
> On Wed, Nov 01, 2023 at 04:17:14PM +0000, Conor Dooley wrote:
> > On Wed, Nov 01, 2023 at 11:04:16AM -0500, Rob Herring wrote:
> > >
> > > On Wed, 01 Nov 2023 17:24:45 +0300, Dmitry Rokosov wrote:
> > > > AW200XX controllers have the capability to declare more than 0xf LEDs,
> > > > therefore, it is necessary to accept LED names using an appropriate
> > > > regex pattern.
> > > >
> > > > The register offsets can be adjusted within the specified range, with
> > > > the maximum value corresponding to the highest number of LEDs that can
> > > > be connected to the controller.
> > > >
> > > > Fixes: e338a05e76ca ("dt-bindings: leds: Add binding for AW200xx")
> > > > Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
> > > > ---
> > > > .../bindings/leds/awinic,aw200xx.yaml | 64 +++++++++++++++++--
> > > > 1 file changed, 58 insertions(+), 6 deletions(-)
> > > >
> > >
> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> > >
> > > yamllint warnings/errors:
> > >
> > > dtschema/dtc warnings/errors:
> > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/awinic,aw200xx.example.dtb: led-controller@3a: led@0: Unevaluated properties are not allowed ('reg' was unexpected)
> > > from schema $id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml#
> > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/awinic,aw200xx.example.dtb: led-controller@3a: led@1: Unevaluated properties are not allowed ('reg' was unexpected)
> > > from schema $id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml#
> > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/awinic,aw200xx.example.dtb: led-controller@3a: led@2: Unevaluated properties are not allowed ('reg' was unexpected)
> > > from schema $id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml#
> >
> > Looks like you need to drop the second part of this hunk from the patch.
> > @@ -45,17 +45,12 @@ properties:
> > maxItems: 1
> >
> > patternProperties:
> > - "^led@[0-9a-f]$":
> > + "^led@[0-9a-f]+$":
> > type: object
> > $ref: common.yaml#
> > unevaluatedProperties: false
> >
> > properties:
> > - reg:
> > - description:
> > - LED number
> > - maxItems: 1
> > -
> > led-max-microamp:
> > default: 9780
> > description: |
> >
> > Each LED still only has one reg entry, right?
>
> You're right... the maxItems for 'reg' is still needed. I'll back it in
> the next version.
> But I don't understand, why my dt_binding_check run doesn't show me this
> problem... I don't specify DT_CHECKER_FLAGS, maybe this is a root cause.
I dunno! I do `make dt_binding_check W=1 DT_SCHEMA_FILES="$filename"` to
test stuff.
Also, you can keep the tag.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2023-11-02 0:17 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-01 14:24 [PATCH v3 00/11] leds: aw200xx: several driver updates Dmitry Rokosov
2023-11-01 14:24 ` [PATCH v3 01/11] leds: aw200xx: fix write to DIM parameter Dmitry Rokosov
2023-11-01 14:24 ` [PATCH v3 02/11] leds: aw200xx: support HWEN hardware control Dmitry Rokosov
2023-11-01 14:31 ` Dmitry Rokosov
2023-11-01 14:24 ` [PATCH v3 03/11] dt-bindings: leds: aw200xx: introduce optional enable-gpios property Dmitry Rokosov
2023-11-06 14:53 ` Rob Herring
2023-11-01 14:24 ` [PATCH v3 04/11] leds: aw200xx: calculate dts property display_rows in the driver Dmitry Rokosov
2023-11-18 16:46 ` Andy Shevchenko
2023-11-01 14:24 ` [PATCH v3 05/11] dt-bindings: leds: aw200xx: remove property "awinic,display-rows" Dmitry Rokosov
2023-11-01 14:24 ` [PATCH v3 06/11] leds: aw200xx: add delay after software reset Dmitry Rokosov
2023-11-01 14:24 ` [PATCH v3 07/11] leds: aw200xx: enable disable_locking flag in regmap config Dmitry Rokosov
2023-11-01 14:24 ` [PATCH v3 08/11] leds: aw200xx: improve autodim calculation method Dmitry Rokosov
2023-11-01 14:24 ` [PATCH v3 09/11] leds: aw200xx: add support for aw20108 device Dmitry Rokosov
2023-11-01 14:24 ` [PATCH v3 10/11] dt-bindings: leds: awinic,aw200xx: add AW20108 device Dmitry Rokosov
2023-11-01 14:24 ` [PATCH v3 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints Dmitry Rokosov
2023-11-01 15:31 ` Conor Dooley
2023-11-01 17:48 ` Dmitry Rokosov
2023-11-01 16:04 ` Rob Herring
2023-11-01 16:17 ` Conor Dooley
2023-11-01 17:44 ` Dmitry Rokosov
2023-11-02 0:17 ` Conor Dooley [this message]
2023-11-18 16:57 ` [PATCH v3 00/11] leds: aw200xx: several driver updates Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231102-concave-untapped-804a5956faab@spud \
--to=conor@kernel.org \
--cc=andy.shevchenko@gmail.com \
--cc=conor+dt@kernel.org \
--cc=ddrokosov@salutedevices.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@sberdevices.ru \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=rockosov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox