From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: [PATCH] arm64: dts: qcom: qrb4210-rb2: Enable MPSS and Wi-Fi
Date: Sat, 04 Nov 2023 21:56:35 +0100 [thread overview]
Message-ID: <20231104-topic-rb2_wifi-v1-1-fd45ae535d2f@linaro.org> (raw)
Enable the remote processors and tighten up the regulators to enable
Wi-Fi functionality on the RB2.
For reference, the hw/sw identifies as:
qmi chip_id 0x150 chip_family 0x4002 board_id 0xff soc_id 0x40670000
qmi fw_version 0x337302d3 fw_build_timestamp 2023-01-06 01:50
fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.3.7.c2-00723-QCAHLSWMTPLZ-1
wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi
crc32 b3d4b790
htt-ver 3.114 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 24 ++++++++++++++++++++----
1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 9738c0dacd58..c2d7e3998d05 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -280,6 +280,12 @@ &remoteproc_cdsp {
status = "okay";
};
+&remoteproc_mpss {
+ firmware-name = "qcom/qrb4210/modem.mbn";
+
+ status = "okay";
+};
+
&rpm_requests {
regulators {
compatible = "qcom,rpm-pm6125-regulators";
@@ -346,8 +352,8 @@ vreg_l7a_1p256: l7 {
};
vreg_l8a_0p664: l8 {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <728000>;
+ regulator-min-microvolt = <640000>;
+ regulator-max-microvolt = <640000>;
};
vreg_l9a_1p8: l9 {
@@ -424,8 +430,8 @@ vreg_l22a_2p96: l22 {
};
vreg_l23a_3p3: l23 {
- regulator-min-microvolt = <3200000>;
- regulator-max-microvolt = <3400000>;
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3312000>;
};
vreg_l24a_2p96: l24 {
@@ -535,6 +541,16 @@ &usb_qmpphy {
status = "okay";
};
+&wifi {
+ vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
+ vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
+ qcom,ath10k-calibration-variant = "Thundercomm_RB2";
+
+ status = "okay";
+};
+
&xo_board {
clock-frequency = <19200000>;
};
---
base-commit: e27090b1413ff236ca1aec26d6b022149115de2c
change-id: 20231104-topic-rb2_wifi-fa773c5f55ec
Best regards,
--
Konrad Dybcio <konrad.dybcio@linaro.org>
next reply other threads:[~2023-11-04 20:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-04 20:56 Konrad Dybcio [this message]
2023-12-17 17:21 ` [PATCH] arm64: dts: qcom: qrb4210-rb2: Enable MPSS and Wi-Fi Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231104-topic-rb2_wifi-v1-1-fd45ae535d2f@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).