[PATCH 0/2] Add ADRF5740 driver

[PATCH 0/2] Add ADRF5740 driver

[Ana-Maria Cusco]

From: Ana-Maria Cusco <ana-maria.cusco@analog.com>

This patch series adds support for ADRF5740 Attenuator.

The ADRF5740 is a silicon, 4-bit digital attenuator with 22 dB
attenuation control range in 2 dB steps.
It offers parallel control mode through four digitally controlled inputs.

Ana-Maria Cusco (2):
  iio: amplifiers: adrf5740: Add Support ADRF5740 4-bit Attenuator
  dt-bindings: iio: hmc425a: add entry for ADRF5740

 .../bindings/iio/amplifiers/adi,hmc425a.yaml  |  4 ++++
 drivers/iio/amplifiers/hmc425a.c              | 23 +++++++++++++++++++
 2 files changed, 27 insertions(+)

-- 
2.34.1

[PATCH 1/2] iio: amplifiers: adrf5740: Add Support ADRF5740 4-bit Attenuator

[Ana-Maria Cusco]

From: Ana-Maria Cusco <ana-maria.cusco@analog.com>

This adds support for the Analog Devices ADRF5740 2 dB LSB, 4-Bit,
Silicon Digital Attenuator, 10 MHz to 60 GHz

Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com>
---
 drivers/iio/amplifiers/hmc425a.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/iio/amplifiers/hmc425a.c b/drivers/iio/amplifiers/hmc425a.c
index e87d35d50a95..ed4d72922696 100644
--- a/drivers/iio/amplifiers/hmc425a.c
+++ b/drivers/iio/amplifiers/hmc425a.c
@@ -5,6 +5,7 @@
  * Copyright 2020 Analog Devices Inc.
  */
 
+#include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/gpio/consumer.h>
@@ -22,6 +23,7 @@
 enum hmc425a_type {
 	ID_HMC425A,
 	ID_HMC540S,
+	ID_ADRF5740
 };
 
 struct hmc425a_chip_info {
@@ -74,6 +76,10 @@ static int hmc425a_read_raw(struct iio_dev *indio_dev,
 		case ID_HMC540S:
 			gain = ~code * -1000;
 			break;
+		case ID_ADRF5740:
+			code = code & BIT(3) ? code & ~BIT(2) : code;
+			gain = code * -2000;
+			break;
 		}
 
 		*val = gain / 1000;
@@ -113,6 +119,10 @@ static int hmc425a_write_raw(struct iio_dev *indio_dev,
 	case ID_HMC540S:
 		code = ~((abs(gain) / 1000) & 0xF);
 		break;
+	case ID_ADRF5740:
+		code = (abs(gain) / 2000) & 0xF;
+		code = code & BIT(3) ? code | BIT(2) : code;
+		break;
 	}
 
 	mutex_lock(&st->lock);
@@ -165,6 +175,7 @@ static const struct iio_chan_spec hmc425a_channels[] = {
 static const struct of_device_id hmc425a_of_match[] = {
 	{ .compatible = "adi,hmc425a", .data = (void *)ID_HMC425A },
 	{ .compatible = "adi,hmc540s", .data = (void *)ID_HMC540S },
+	{ .compatible = "adi,adrf5740", .data = (void *)ID_ADRF5740 },
 	{},
 };
 MODULE_DEVICE_TABLE(of, hmc425a_of_match);
@@ -188,6 +199,15 @@ static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = {
 		.gain_max = 0,
 		.default_gain = -0x10, /* set default gain -15.0db*/
 	},
+	[ID_ADRF5740] = {
+		.name = "adrf5740",
+		.channels = hmc425a_channels,
+		.num_channels = ARRAY_SIZE(hmc425a_channels),
+		.num_gpios = 4,
+		.gain_min = -22000,
+		.gain_max = 0,
+		.default_gain = 0xF, /* set default gain -22.0db*/
+	},
 };
 
 static int hmc425a_probe(struct platform_device *pdev)
@@ -229,6 +249,9 @@ static int hmc425a_probe(struct platform_device *pdev)
 	indio_dev->info = &hmc425a_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
+	/* Set default gain */
+	hmc425a_write(indio_dev, st->gain);
+
 	return devm_iio_device_register(&pdev->dev, indio_dev);
 }
 
-- 
2.34.1

[PATCH 2/2] dt-bindings: iio: hmc425a: add entry for ADRF5740

[Ana-Maria Cusco]

From: Ana-Maria Cusco <ana-maria.cusco@analog.com>

The ADRF5740 is a silicon, 4-bit digital attenuator with 22 dB
attenuation control range in 2 dB steps.

Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com>
---
 .../devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml       | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index 2ee6080deac7..42341fbf8d74 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -18,12 +18,16 @@ description: |
   HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz
     https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf
 
+  ADRF5750 2 dB LSB, 4-Bit, Silicon Digital Attenuator, 10 MHz to 60 GHz
+    https://www.analog.com/media/en/technical-documentation/data-sheets/adrf5740.pdf
+
 
 properties:
   compatible:
     enum:
       - adi,hmc425a
       - adi,hmc540s
+      - adi,adrf5740
 
   vcc-supply: true
 
-- 
2.34.1

Re: [PATCH 2/2] dt-bindings: iio: hmc425a: add entry for ADRF5740

[Krzysztof Kozlowski]

On 03/11/2023 16:01, Ana-Maria Cusco wrote:
> From: Ana-Maria Cusco <ana-maria.cusco@analog.com>
> 
> The ADRF5740 is a silicon, 4-bit digital attenuator with 22 dB
> attenuation control range in 2 dB steps.
> 
> Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com>
> ---
>  .../devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml       | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
> index 2ee6080deac7..42341fbf8d74 100644
> --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
> +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
> @@ -18,12 +18,16 @@ description: |
>    HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz
>      https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf
>  
> +  ADRF5750 2 dB LSB, 4-Bit, Silicon Digital Attenuator, 10 MHz to 60 GHz
> +    https://www.analog.com/media/en/technical-documentation/data-sheets/adrf5740.pdf
> +
>  
>  properties:
>    compatible:
>      enum:
>        - adi,hmc425a
>        - adi,hmc540s
> +      - adi,adrf5740

Please keep alphabetical order of entries.

Best regards,
Krzysztof

Re: [PATCH 0/2] Add ADRF5740 driver

[Jonathan Cameron]

On Fri,  3 Nov 2023 17:01:28 +0200
Ana-Maria Cusco <anamaria.cuscoo@gmail.com> wrote:

> From: Ana-Maria Cusco <ana-maria.cusco@analog.com>
Hi Ana-Maria,

If you do a v2, then make it clear in the title that this is adding support
to an additional driver rather than a whole new one.


> 
> This patch series adds support for ADRF5740 Attenuator.
> 
> The ADRF5740 is a silicon, 4-bit digital attenuator with 22 dB
> attenuation control range in 2 dB steps.
> It offers parallel control mode through four digitally controlled inputs.
> 
> Ana-Maria Cusco (2):
>   iio: amplifiers: adrf5740: Add Support ADRF5740 4-bit Attenuator
>   dt-bindings: iio: hmc425a: add entry for ADRF5740
> 
>  .../bindings/iio/amplifiers/adi,hmc425a.yaml  |  4 ++++
>  drivers/iio/amplifiers/hmc425a.c              | 23 +++++++++++++++++++
>  2 files changed, 27 insertions(+)
>